Department of Agricultural Research and Education has published Tender For Making Of Bore Well For Institute With Pipe Line At Icar-Cifa, Kausalyaganga. Submission Date for this Tender is 09-02-2024. Bore Well Tenders in bhubaneswar Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.All types of soil 350 mm dia. (item code:23.1.1.2) |
2 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia. (item code:23.3.3) |
3 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.200 mm nominal size dia. (item code:23.4.3) |
4 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.(item code:23.5) |
5 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.(item code:23.7) |
6 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. (item code:23.12) |
7 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia.(item code:23.13.3) |
8 | Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp. (item code:23.14.3) |
9 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).200 mm dia. (item code:23.15.3) |
10 | Providing and fixing of 5HP sumbersible of pump of approved brand (Crompton, Kirloskar/Havells etc.) |
11 | Supplying and laying of PVC sheathed XLPE power cable 1.1 KV grade 3.5 core 35 mm2 armoured cable in ground including earth excavation, sand cushioning, protective cover and refilling . |
12 | Providing and fixing of electrical panel board size 600mm x 600mm with 900mmheight stand made up of 50 x 50 x 6mm angle, with 63A insulator, starter, indicator and painted with high gloss enamel paint. |
13 | Supplying and fixin of 3 core 4 sqmm submersible flatcable as per the requirement of Institute. |
14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.75 mm nominal inner dia Pipes. (item code:18.9.8) |
15 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.62.50 mm nominal inner dia Pipes. (item code:18.9.7) |
16 | Providing and fixingof 80mm dia UPVC Tee of reputed make ISI marked. |
17 | Providing and fixing of 80mm dia UPVC cut piece of reputed make ISI marked. |
18 | Providing and fixing of 80mm dia UPVC elbow of reputed make ISI marked. |
19 | Providing and fixing of 80mm dia UPVC control valve reputed ISI marked heavy duty. |
20 | Providing and fixing of 80mm dia UPVC socket of reputed make ISI marked. |
21 | Providing and fixing 80mm dia uPVC union of reputed make ISI marked. |
22 | Provision of dewatering of ponds while de-silting of slushy soil as per the direction of OIC. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail