Tender For Supply Of Furniture, siliguri-West Bengal

Supply Of Furniture , Furniture , Supply And Placement Of Coeval- Main Desk As Per Design Approve As Per Order Shall Have An Overall Size Of Main Desk : 2100Mm (W) X 900Mm (D) X 750Mm (H) & Eru : 1500Mm (W) X 550Mm (D) X 750Mm (H). The Main Top Should Be Made Of 36Mm Thk Medium Density Fibre Board As Per Is:12406 With Pigmented Polyurethane Coating On Both Sides. The Side Panel Should Also Be Made Of 36Mm Thk Medium Density Fibre Board As Per Is:12406 With Pigmented Polyurethane Coating On Both Sides. Modesty Should Be Made Of Painted 8Mm Thick Toughened Glass (As Per Is:2835) Fixed On A Metal Frame Made Of Stainless Steel Tubes Grade 304 Of Cross Section 19X19x2 Thick And 3Mm Thick Stainless Steel Plates With The Help Of Both Side Adhesive Tape. The Metal Plate Should Be Made Of 8Mm Thick Stainless Steel Grade 304.It Is Fixed Between The Main Top Panel And Side Panel On Both Sides Of The Desk. The Leather Pad Should Be Made Of 1.2Mm Thk Gi Sheet (As Per Is:277) With Genuine Leather On Top Side And Wool Polyester Of 350G/M^2 Density Felt On Bottom Side. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofcoeval Wardrobe Unit As Per Design Approve As Per Order Shall Have An Overall Size Of 800Mm (W) X 520Mm (D) X 1850Mm (H). The Top Panel Should Be Made Of 36Mm Thk Medium Density Fibre Board As Per Is:12406 With Pigmented Polyurethane Coating On Both Sides. The Side Panel Should Also Be Made Of 18Mm Thk Medium Density Fibre Board As Per Is:12406 With Pigmented Polyurethane Coating On Both Sides. The Bottom Panel Should Also Be Made Of 36Mm Thk Medium Density Fibre Board As Per Is:12406 With Pigmented Polyurethane Coating On Both Sides. The Back Panels Should Also Be Made Of 18Mm Thk Medium Density Fibre Board As Per Is:12406 With Pigmented Polyurethane Coating On Both Sides. The Door Panels Should Be Made Of 18Mm Thk Medium Density Fibre Board As Per Is:12406 With Pigmented Polyurethane Coating On Both Sides. The Door Lock Plate Plate Should Be Made Of 3Mm Thick Stainless Steel Grade 304 Led Strip Light Shall Be Provided Beneath Top Panel On Inside. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofla Sede- High Back Chair As Per Design Approve As Per Order Shall Have An Overall Size Of 761Mm W X 761Mm D X 1140 – 1315Mm H. Seat/Back Assembly : The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Pure Leather And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgffor 25% Compression.The Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Pure Leather. Seat Size : 47.6 Cm. (W) X 49.2 Cm. (D). Back Size : 47.5 Cm. (W) X 77 Cm. (D). Armrests: The Armrest Top Should Bemoulded From Polyurethane(Pu), Upholstered In Pure Leather And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat/Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Bemade Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 6.0±0.5 Cm. Adjustable Back Support: Back Frame Should Beconnected To The Up/Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly The Pedestal Should Behigh Pressure Die Cast Polishedaluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia.(75.0 ± 1.0Cm. With Castors.) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Mouldedin Black Polypropylene.Overall Dimensions Of Chair Seat Height -44.5 To 54.5 Cm. Height -114.0-131.5 Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofla Sede- Visitors Chair As Per Design Approve As Per Order Shall Have An Overall Size Of 609Mm (W) X 647Mm (D) X 982Mm (H). Seat/Back Assembly : The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Pure Leather And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgffor 25% Compression.The Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Pure Leather. Seat Size : 47.6 Cm. (W) X 49.2 Cm. (D). Back Size : 46.5 Cm. (W) X 59.5 Cm. (D). Visitor Tubular Frame: The Tubular Frame Should Becantilever Type And Made Of Ø2.54± 0.03 Cm X 0.02 ± 0.016Cm Thick Ss 202 Tube. The Back Should Beconnected To Frame Through Chrome Plated High Pressure Die Case Connector Piece. Overall Dimensions Of Chair Seat Height -46.2 Cm. Height -98.2 Cm. Width & Depth Of Chair As Measured From Base - Width-60.9 Cm And Depth-64.7 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofvertex L-Shaped Sofa As Per Design Approve As Per Order Shall Have An Overall Size Of 2655Mm (W1) X2105mm (W2) X 900Mm (H). Finish Color - Toffee + Dark Grey Net Weight (Kg) - 159, Seat Height (Cm) - 45.5, Upholstery Material - Fabric + Syn Leather, Primary Material - Fabric. Back Upper Cushion Is Made Of 32D-50 Mm Thick Super Soft Foam With 32D- 25Mm Thick Super Soft Topper Foam. Back Lumber Cushion Entirely Made Of 32D Wedge Shaped Super Soft Foam. S’ Spring Suspension System Built In The Base Frame For A Bouncy Feel. Polypropylene With 20% Talc Filled High Impact Durable Legs. Solid Pinewood Back Frame. 28D – 75 Mm Thick + 32D – 25 Mm Thick Super Soft Foam With 32D – 25 Mm Thick Super Soft Topper Foam. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofopulent Plus Coffee Table As Per Design Approve As Per Order Shall Have An Overall Size Of 1450Mm (W) X850mm (D) X 380Mm (H). Table Top Meterials Tempered Glass, Color : Super White In Beige Painting, Body : Mdf, Color: Grey-White High Glossy. Type Of Caoting (Pu /Melamine/Paper/Paper Plus Pu/Lamination) : Pu Legs: Rubber Wood, Color : Walnut Painting. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofstripe 1-Seater Recliner As Per Design Approve As Per Order Shall Have An Overall Size Of 790Mm (W) X930mm (D) X 1020Mm (H). Material Should Beof High Quality Leather With Top Grain Leather At Touch Points. Sectioned Backrest With Manual Push-Back Mechanism To Slide Into Reclining Position. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofcedar 1-Seater Sofa As Per Design Approve As Per Order Shall Have An Overall Size Of 640Mm (W) X860mm (D) X 880Mm (H) X 450Mm (Sh). Distinct-Looking Mid-Back Sofa With A Curved Backrest And Angular Wooden Armrests. Crafted From Long Lasting Sheesham Wood, Making It Extremely Sturdy And Resilient To Insects, Fungus, And Mold. Recron-Filled Cushions For Back Support, And Soft Foam For Comfortable Seating. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofopulent Coffee Table As Per Design Approve As Per Order Shall Have An Overall Size Of 1310Mm (W) X700mm (D) X 380Mm (H). Table Top Meterials Tempered Glass, Color : Super White In Beige Painting, Body : Mdf, Color: Grey-White High Glossy. Type Of Caoting (Pu /Melamine/Paper/Paper Plus Pu/Lamination) : Pu Legs: Rubber Wood, Color : Walnut Painting. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofdisplay Expo Small As Per Design Approve As Per Order Shall Have An Overall Size Of 1200Mm (W) X400mm (D) X 754Mm (H). Material : 15 Mm Particle Board. Lamination : Melamine Impregnated Paper Construction : Knock Down. Glass : 6 Mm Tampered. Hinges : Metal In Chrome Plated. Handles : Metal In Powder Coated Load Bearing Capacity Of Each Shelf : 35 Kg. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Of Mayfair Main Desk + Eru + Pedestal As Per Design Approve As Per Order Shall Have An Overall Size Of Main Desk : 1200Mm (W) X 600Mm (D) X 750Mm (H),Eru : 900Mm (W) X 450Mm (D) X 750Mm (H) + Pedestal : 390Mm (W) X 435Mm (D) X 529Mm (H). The Top Shall Be In White Cedar And Black And Shall Be 18 Mm Plb With Pvc Lipping.The Side Panels Shall Be 18 Mm Thickplt With Pvc .The Modesty Panel Shall Be 18 Mm Thick Plt.The Modesty Panel Shall Be In A Combination Of Black & White Cedar. The Top Is 18 Mm Thick Plb . The Two Drawer Mobile Pedestal Is Available In One Size .The Top And Drawer Fronts Shall Be In White Cedar While The Other Components Shall Be In Black. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofmarvel- High Back Chair As Per Design Approve As Per Order Shall Have An Overall Size Of 761Mm W X 1127-1302Mm H X 761Mm D. Seat/Back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression.The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D). High Back Size: 47.7 Cm. (W) X 76.4 Cm. Armrests: The Armrest Top Should Be Moulded From Polyurethane(Pu) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S. E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. Active Bio-Synchro Mechanism : The Adjustable Tilting Mechanism Should Be Designed With The Following Features: 360 Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat/Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Be Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment : Seat Depth Adjustment Should Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Be Of 6.0±0.5 Cm. Adjustable Back Support: Back Frame Should Be Connected To The Up/Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment: The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly: The Pedestal Should Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 65.0 ± 0.5Cm. Pitch-Center Dia.(75.0 ± 1.0Cm. With Castors). Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter. Overall Dimensions Of Chair Seat Height -43.1-53.1Cm Height -112.7-130.2Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofmarvel- Visitors Chair As Per Design Approve As Per Order Shall Have An Overall Size Of 609Mm W X 982Mm H X 642Mm D. Seat /Back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D). Back Size: 47.7 Cm. (W) X 60.1 Cm. (D). Visitor Tubular Frame: The Tubular Frame Should Becantilever Type And Made Of Ø2.54± 0.03 Cm X 0.02 ± 0.016Cm Thick Ss 202 Tube. The Back Should Beconnected To Frame Through Chrome Plated High Pressure Die Case Connector Piece. Overall Dimensions Of Chair. Seat Height -44.8Cm. Height -98.2Cm. Width & Depth Of Chair As Measured From Base - Width-60.9 Cm And Depth-64.2 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofstorwel Plain Almirah As Per Design Approve As Per Order Shall Have An Overall Size Of 916Mm(W) X 486Mm(D) X 1981Mm(H). Overall Size Should Be In Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. It Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10). Plenty Of Colour Options And Shelving Options Shall Be Available. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Of Grandeur 6 Ft Main Table + Eru As Per Design Approve As Per Order Shall Have An Overall Size Of Main Desk : 1800Mm (W) X 2100Mm (D) X 740Mm (H). Main Worktop :Made Of 43Mm Thick (±1) Combination Of Mdf And Particle Board With Top Veneer Facecoated With Clear Lacquer. All Edges Are Edge Banded With Matching 1Mm Thick Veneerlipping.Leather Pad:Made Of 18Mm Thick (±1) Mdf With Leatherette Wrapped Around Top Surface. Thisleather Pad Is Fixed To Main Top Panel. Drawer Unit:Top Panel And Drawer Unit Modesty Panel Is Made Of 43Mm Thick (±1) Combination Ofmdf And Particle Board With Top Veneer Face Coated With Clear Lacquer. All Thickness Edges Are Edge Banded With Matching Lipping. Remaining Construction Is Of 18Mm Pre-Laminated Twin Board (Plt) Of E1-P2 Grade Andapproved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thickpvc Lipping. Bottom Panel Of Drawer Is 9Mm Thick Particle Board With Leatherette On Topsurface. Drawer Unit Is Provided With Soft Closing Channels For Smooth Opening And Closing.Drawer Unit Is Secured With Side Central Lock. Modesty:Made Of 18Mm Thick Pre-Laminated Twin Board (Plt) Of E1-P2 Grade And Approvedshade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvclipping. Modesty Is Fitted With Aluminum Trims. Eru Worktop :Made Of 43Mm Thick (±1) Combination Of Mdf And Particle Board With Top Veneer Facecoated With Clear Lacquer. All Thickness Edges Are Edge Banded With Matching Lipping. Understructure And Eru Hinge Door Unit:Made Of 18Mm Thick Pre-Laminated Twin Board (Plt) Of E1-P2 Grade And Approvedshade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvclipping. Door Is Fixed With Soft Closing Hinges And Handle Is Provided For Ease Of Opening.Eru Is Secured With Side Central Lock. Access Flap With Power Box:Soft Closing Access Flap With Power Box Contains 3 Universal Sockets, 2 Usb Powerpoints, 1 Hdmi Connection, 1 Inbuilt Misc. Cable Grommet And Cat 3 And Cat 6Connections. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Of Grandeur 4Ft Back Unit Body & Shutter As Per Design Approve As Per Order Shall Have An Overall Size Of 2400Mm (W) X 470Mm (D) X 1226Mm (H). Construction And Material: Made From Combination Of Side Panel(0.5Mm Crca), Bottom Panel(0.5Mm Crca), Backpanel(0.5Mm Crca), Top Bottom Stiffener (1.2Mm Crca) And End Cover(0.6Mm Crca).Shelves Are 12 Bend Panel Made Of 0.7Mm Thick Crca (D Grade, Is-513). Storage Body Is Powder Coated With Epoxy Polyester To The Thickness Of 50 Microns(+/-10 Micron). Veneer Door: Made Of 12Mm Thick (±1) Mdf With 3.5Mm Veneer Both Side And Face Coated With Clearlacquer. All Edges Are Edge Banded With Matching 1Mm Thick Veneer Lipping. Door Isprovided With Soft Closing Hinge. Handle Is Also Provided For Ease Of Opening. Storage Issecured With 3 Way Cam Lock. Glass Door: Made From The Combination Of Aluminium Alloy (63400) Extrusion And 4Mm Cleartoughened Glass. Aluminium Extrusion Of Glass Doors Are Powder Coated With Epoxy Polyester To The Thickness Of 50 Microns (+/-10 Micron). Handle Is Provided For Ease Ofopening. Rh Glass Door Is Provided With 3 Way Cam Lock For Security. Supplying And Placing In Position Back Unit Shutter Of The Following Specifications. 2400M (W) X 470Mm (D) X 1226Mm (H). Construction And Material: Made From Combination Of Side Panel(0.5Mm Crca), Bottom Panel(0.5Mm Crca), Backpanel(0.5Mm Crca), Top Bottom Stiffener (1.2Mm Crca) And End Cover(0.6Mm Crca).Shelves Are 12 Bend Panel Made Of 0.7Mm Thick Crca (D Grade, Is-513). Storage Body Is Powder Coated With Epoxy Polyester To The Thickness Of 50 Microns(+/-10 Micron). Veneer Door:Made Of 12Mm Thick (±1) Mdf With 3.5Mm Veneer Both Side And Face Coated With Clearlacquer. All Edges Are Edge Banded With Matching 1Mm Thick Veneer Lipping. Door Isprovided With Soft Closing Hinge. Handle Is Also Provided For Ease Of Opening. Storage Issecured With 3 Way Cam Lock. Glass Door: Made From The Combination Of Aluminium Alloy (63400) Extrusion And 4Mm Cleartoughened Glass. Aluminium Extrusion Of Glass Doors Are Powder Coated With Epoxypolyester To The Thickness Of 50 Microns (+/-10 Micron). Handle Is Provided For Ease Ofopening. Rh Glass Door Is Provided With 3 Way Cam Lock For Security. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Of Grandeur Coffee Table As Per Design Approve As Per Order Shall Have An Overall Size Of 800Mm (W) X 800Mm (D) X 320Mm (H). Top And Bottom Panel:Made Of 36Mm Thick (±1) Combination Of Mdf And Particle Board With Top Veneer Facecoated With Clear Lacquer. All Edges Are Edge Banded With Matching 1Mm Thick Veneer Lipping. Side Panel:Made Of 18Mm Thick Pre-Laminated Twin Board (Plt) Of E1-P2 Grade And Approvedshade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvclipping. Side Panels Are Fitted With Aluminum Trim. Skirting:Made Of 18Mm Thick Pre-Laminated Twin Board (Plt) Of E1-P2 Grade And Approvedshade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvclipping. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Of Grandeur Side Table As Per Design Approve As Per Order Shall Have An Overall Size Of 450Mm (W) X 450Mm (D) X 370Mm (H). Top And Bottom Panel: Made Of 36Mm Thick (±1) Combination Of Mdf And Particle Board With Top Veneer Facecoated With Clear Lacquer. All Edges Are Edge Banded With Matching 1Mm Thick Veneer Lipping. Side Panel:Made Of 18Mm Thick Pre-Laminated Twin Board (Plt) Of E1-P2 Grade And Approvedshade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvclipping. Side Panels Are Fitted With Aluminum Trim. Skirting:Made Of 18Mm Thick Pre-Laminated Twin Board (Plt) Of E1-P2 Grade And Approvedshade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvclipping. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofla Sede- High Back Chair As Per Design Approve As Per Order Shall Have An Overall Size Of 761Mm W X 761Mm D X 1140 – 1315Mm H. Seat/Back Assembly : The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Pure Leather And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgffor 25% Compression.The Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Pure Leather. Seat Size : 47.6 Cm. (W) X 49.2 Cm. (D). Back Size : 47.5 Cm. (W) X 77 Cm. (D). Armrests: The Armrest Top Should Bemoulded From Polyurethane(Pu), Upholstered In Pure Leather And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat/Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Bemade Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 6.0±0.5 Cm. Adjustable Back Support: Back Frame Should Beconnected To The Up/Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly The Pedestal Should Behigh Pressure Die Cast Polishedaluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia.(75.0 ± 1.0Cm. With Castors.) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Mouldedin Black Polypropylene.Overall Dimensions Of Chair Seat Height -44.5 To 54.5 Cm. Height -114.0-131.5 Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofla Sede- Visitors Chair As Per Design Approve As Per Order Shall Have An Overall Size Of 609Mm (W) X 647Mm (D) X 982Mm (H). Seat/Back Assembly : The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Pure Leather And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgffor 25% Compression.The Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Pure Leather. Seat Size : 47.6 Cm. (W) X 49.2 Cm. (D). Back Size : 46.5 Cm. (W) X 59.5 Cm. (D). Visitor Tubular Frame: The Tubular Frame Should Becantilever Type And Made Of Ø2.54± 0.03 Cm X 0.02 ± 0.016Cm Thick Ss 202 Tube. The Back Should Beconnected To Frame Through Chrome Plated High Pressure Die Case Connector Piece. Overall Dimensions Of Chair Seat Height -46.2 Cm. Height -98.2 Cm. Width & Depth Of Chair As Measured From Base - Width-60.9 Cm And Depth-64.7 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofvertex L-Shaped Sofa As Per Design Approve As Per Order Shall Have An Overall Size Of 2655Mm (W1) X2105mm (W2) X 900Mm (H). Finish Color - Toffee + Dark Grey Net Weight (Kg) - 159, Seat Height (Cm) - 45.5, Upholstery Material - Fabric + Syn Leather, Primary Material - Fabric. Back Upper Cushion Is Made Of 32D-50 Mm Thick Super Soft Foam With 32D- 25Mm Thick Super Soft Topper Foam. Back Lumber Cushion Entirely Made Of 32D Wedge Shaped Super Soft Foam. S’ Spring Suspension System Built In The Base Frame For A Bouncy Feel. Polypropylene With 20% Talc Filled High Impact Durable Legs. Solid Pinewood Back Frame. 28D – 75 Mm Thick + 32D – 25 Mm Thick Super Soft Foam With 32D – 25 Mm Thick Super Soft Topper Foam. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofarbor Coffee Table As Per Design Approve As Per Order Shall Have An Overall Size Of 1200Mm (W) X600mm (D) X 450Mm (H). Material: Table Structure Consists Of Visible Panels Are 18Mm Thk Plt Panles. Hardware: High Quality Fasteners Are Used. Construction: Knock Down. Finish: 18Mm Thk Pre Laminated Particle Boards With Laminate Of Rimini Walnut Suede Finish And Matching Lipping With Matt Finish. 18Mm Thk Pre Laminated Particle Boards With Laminate Of Black Ink Suede Finish And Matching Lipping With Matt Finish. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofrhine V3 1-Seater Recliner As Per Design Approve As Per Order Shall Have An Overall Size Of 830Mm (W) X 740Mm (D) X 1000Mm (H) X 440Mm (Sh). Stitching: Thread :Nylon 40 Tktpitch: Gap 2 Mm From Border + Pitch 6 Per Inch Leather/Pvc/Pu/Fabric:Full Pu Leatherette. Frame Material (Tropical Wood / Pine Wood/ Rubber Wood): Rubberwood Moisture Content :12 – 14 % Seat Foam: (Density, Type) :24 Density Foam + Pocket Spring (49 Nos. Of Dia 50 Mm / Seat) Spring Rod Dia =1.6 Mm+ 24 Density Foam. Back Foam: (Density, Type) :24 Density Foam + Polyester Fabric (Recron).Armrest Foam: (Density, Type) :24 Density Foam. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofbobbin 2-Seater Sofa As Per Design Approve As Per Order Shall Have An Overall Size Of 1500Mm (W) X 820Mm (D) X 900Mm (H) X 440Mm (Sh). Understructure Should Be Made Up Of Pinewood Members. Pinewood Are Of Cross Sections 22 X 64, 34 X 64Mm & 16 X 35Mm Without Having Major Knots & Defects On The Surface. 3Mm Mdf Is Stapled On The Sem Front Baton. Zigzag Spring Of Dia 3.8Mm Is Mounted On The Seat Structure Using Plastic Spring Mounting Clips Support & Additional Cushioning Purpose. Non Woven Fabric Is Stapled On The Seat Structure Frame Above The Spring Assembly To Avoid Direct Contact Between The Metal Springs And The Seat Foam. This Prevents Seat Fo From Tearing Powder Coated Ms Support Pipe Is Fitted With The Wooden Seat Frame To Give Additional Strengt The Structure. Complete Understructure Is Made By Gluing, Nailing & Stapling Foam Seat Is Made Of Pu Foam With Density 28 Kg/M3 With A Top Layer Of Supersoft Pu Foam With Density 33 Kg/M3 Seat Front Bottom Is Stapled With The Pu Foam With Density 28 Kg/M3 Upholstery: Seat Upholstery Is Made In Polyester Fabric With Partitions. Understructure. Understructure Is Made Up Of Combination Of Plywood & Pinewood Members. Plywood Is 12:1Mm Thk. [Moisture Resistance & Termite Proof As Per Is:303] & Pinewood Are Of Cross Sections 16 X 35Mm, 12 X 22Mm & 16 X 74Mm And Triangular Batons Of 22 X 75 Without Having Major Knots & Defects On The Surface Hdpe Sheet Is Stapled On The Back And Front Of The Structure And On The Ear Ply. Foam Backrest Is Made Up Of Combination Of Pu Foam With Density 28 Kg/M3 And 32 Kg/M3 Super-Soft On The Front Lumber Portion And The Shoulder Area Has Supersoft Pu Foam With Density 32 Kg/M3. This Is Covered Wil A Top Layer Of 200 Gsm Recron Sheet. The Top Surface Has Foam With Density 32 Kg/M3 And A Layer Of 200 Gsm Recron Sheet. Complete Back Surface & Underarm Of Backrest Is Glued With The Pu Foam With Density 28 Kg/M. Upholstery Backrest Upholstery Is Made In Polyester Fabric Jacket With Recron Sheet Cushions Of 200 Gsm Sandwitched Between A Layer Of White Non-Woven Cloth Of 30 Gsm. The Upholstered Jacket Has A Button At The Front Armrest [Lh & Rh]. Understructure: Understructure Is Made Of Combination Of Plywood & Pinewood Members. Plywood Is 12±1Mm Thk [Moisture Resistance & Termite Proof As Per Is:303] & Pinewood Are Of Cross Section 16X35mm Without Having Major Knots & Defects On The Surface. 2Mm Cardboard And Hdpe Sheet Is Stapled On The Structure To Provide A Surface For Sticking Foam. Foam: Armrest Is Made Of Pu Foam With Density 28 Kg/M3, Upholstery: Armrest Upholstery Is Made In Polyester Fabric. Legs: Option A: Rubberwood [Grade-A] Legs With The M8 Stud For Fitting At The Bottom Surface Of The Armrest Lh & Rh. Legs Are Coated With Pu Clear Lacquer Coat [Black Matt Finish] [Min. Hardness - 1H]. Option B: Plastic Injection Moulded Legs Made Of Material Pa-6 With Insert Of M8 Stud For Fitting At The Bottom Surface Of The Armrest Lh & Rh. Plastic Legs Are Black [Matte Finish]. Assembly Upholstered Seat, Backrest, Armrest-Lh & Armrest-Rh Are Assembled Together With The M8 Bolts, Nuts & Washer. Then A Non-Woven Is Stapled On The Bottom Surface To Cover The Structure. Packet: Each Packet Contains One Assembled Sofa Without Legs And A Separate Hardware Packet Containing 4 Nos, Of Rubberwood Legs/ Plastic Injection Moulded Legs. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofarbor Coffee Table As Per Design Approve As Per Order Shall Have An Overall Size Of 1200Mm (W) X600mm (D) X 450Mm (H). Material: Table Structure Consists Of Visible Panels Are 18Mm Thk Plt Panles. Hardware: High Quality Fasteners Are Used. Construction: Knock Down. Finish: 18Mm Thk Pre Laminated Particle Boards With Laminate Of Rimini Walnut Suede Finish And Matching Lipping With Matt Finish. 18Mm Thk Pre Laminated Particle Boards With Laminate Of Black Ink Suede Finish And Matching Lipping With Matt Finish. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofdisplay Expo Small As Per Design Approve As Per Order Shall Have An Overall Size Of 1200Mm (W) X400mm (D) X 754Mm (H). Material : 15 Mm Particle Board. Lamination : Melamine Impregnated Paper Construction : Knock Down. Glass : 6 Mm Tampered. Hinges : Metal In Chrome Plated. Handles : Metal In Powder Coated Load Bearing Capacity Of Each Shelf : 35 Kg. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Of Mayfair Main Desk + Eru + Pedestal As Per Design Approve As Per Order Shall Have An Overall Size Of Main Desk : 1200Mm (W) X 600Mm (D) X 750Mm (H),Eru : 900Mm (W) X 450Mm (D) X 750Mm (H) + Pedestal : 390Mm (W) X 435Mm (D) X 529Mm (H). The Top Shall Be In White Cedar And Black And Shall Be 18 Mm Plb With Pvc Lipping.The Side Panels Shall Be 18 Mm Thickplt With Pvc .The Modesty Panel Shall Be 18 Mm Thick Plt.The Modesty Panel Shall Be In A Combination Of Black & White Cedar. The Top Is 18 Mm Thick Plb . The Two Drawer Mobile Pedestal Is Available In One Size .The Top And Drawer Fronts Shall Be In White Cedar While The Other Components Shall Be In Black. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofmarvel- High Back Chair As Per Design Approve As Per Order Shall Have An Overall Size Of 761Mm W X 1127-1302Mm H X 761Mm D. Seat/Back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression.The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D). High Back Size: 47.7 Cm. (W) X 76.4 Cm. Armrests: The Armrest Top Should Be Moulded From Polyurethane(Pu) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S. E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. Active Bio-Synchro Mechanism : The Adjustable Tilting Mechanism Should Be Designed With The Following Features: 360 Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat/Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Be Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment : Seat Depth Adjustment Should Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Be Of 6.0±0.5 Cm. Adjustable Back Support: Back Frame Should Be Connected To The Up/Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment: The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly: The Pedestal Should Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 65.0 ± 0.5Cm. Pitch-Center Dia.(75.0 ± 1.0Cm. With Castors). Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter. Overall Dimensions Of Chair Seat Height -43.1-53.1Cm Height -112.7-130.2Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofmarvel- Visitors Chair As Per Design Approve As Per Order Shall Have An Overall Size Of 609Mm W X 982Mm H X 642Mm D. Seat /Back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D). Back Size: 47.7 Cm. (W) X 60.1 Cm. (D). Visitor Tubular Frame: The Tubular Frame Should Becantilever Type And Made Of Ø2.54± 0.03 Cm X 0.02 ± 0.016Cm Thick Ss 202 Tube. The Back Should Beconnected To Frame Through Chrome Plated High Pressure Die Case Connector Piece. Overall Dimensions Of Chair. Seat Height -44.8Cm. Height -98.2Cm. Width & Depth Of Chair As Measured From Base - Width-60.9 Cm And Depth-64.2 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofstorwel Plain Almirah As Per Design Approve As Per Order Shall Have An Overall Size Of 916Mm(W) X 486Mm(D) X 1981Mm(H). Overall Size Should Be In Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. It Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10). Plenty Of Colour Options And Shelving Options Shall Be Available. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofimpress Main Desk With Eru And Pedestal As Per Design Approve As Per Order Shall Have An Overall Size Of 1800Mm (W) X 900Mm (D) X 750Mm (H). Top Surface Of The Table Shall Made Up Of Mdf (Medium Density Fibre ) Board Duly Finished With Veneer And Final Coating Of Pu. The Main Desk Should Contain In Built Key Board Pull Out Tray For Keeping Keyboard Of Computer. The Front Modesty Panel Of The Table Shall Be Made Up Of Mdf Board Of Size 1640 Mm X 600 Mm X 16Mm Which Shall Also Be Duly Finished With Veener And Pu Coating. For Personal Storage One Mobile Pedestal (3 Drawer Unit) Shall Be Provided Of Size 510 Mm Width X 635 Mm Height And 445 Mm Depth. The Storage Pedestal Shall Also Be Made Up Of Mdf Duly Finished With Veener & Final Coating Of Pu. The Side Shall Be Of Size 1200Mm Width X 445Mm Depth X 660 Mm Height. The Side Unit Shall Be Made Up Of Mdf Board Duly Finshed With Veneer And Final Finish By Pu Coating. The Design Of The Side Unit Shall Be Such That It Can Be Placed On Either Side Of The Main Table. The Side Unit Shall Contain Open Space For Keeping Cpu In Extreme Right Side, One Closed Storage Shutter At Extreme Left End & Open Space In The Middle With One Shelf For Keeping Files. The Thickness Of The Top Of The Side Unit Shall Be 25Mm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Of Emerald Leather - High Back Chair As Per Design Approve As Per Seat Assembly: The Seat Is Made Up Of 12Mm Thick Mr Grade Plywood, Layered With Pocket Spring Coms, Super Soft Foam Of 32 Kg/M3 Density And Edging Foam Of 28 Kg/M3 Dormity. A 200Gsm Soft Touch Fibre Fill Sheet Is Placed Over Foam Sub-Assembly And Upholstered In Natural Leather Or Leatherette. Back Assembly: The Back Assembly Is Made Up Of A Combination Of Pinewood Members, 12Mm Thick Mr Grade Plywood And 2Mm Thick Cardboard, Layered With Slab Stock Foam Of 28 Kg/M3 Density. A 200Gsm Soft Touch Fibre Fill Sheet Is Placed Over Foam Sub-Assembly And Upholstered In Natural Leather Or Leatherette. Armpad Assembly: The Amped Assembly Is Made Up Of 6Mm Thick Mr Grade Plywood Fixed With Ms Powder-Coated Brackets, Inyered With Foam Of 60 Kg/M3 Density, A 200Gsm Soft Touch Fibre Fill Sheet Is Placed Over Foam Sub-Assembly And Upholstered In Natural Leather Or Leatherette. Center Tilt With Multi Position Lock Mechanism: The Mechanism Is Designed With The Following Features: 360 Revolving Type. 3 Position Locking Till Tension Adjustment. Pneumatic Height Adjustment: The Class 4 Pneumatic Height Adjustment Has Stroke Of 100.3 Cm. Pedestal Assembly: The Pedestal Is Made Of High-Pressure Die-Cast Polished Aluminum With A Buffed Outside Surface And Black Color-Coated Internal Surface, It Is Fitted With 5 Castors And Has A Pitch-Center Diameter Of 67.510.5 Cm (77.5 10 Cm With Castors). Twin Wheel Castors: The Twin Wheel Castors Are Injection Moulded In Black Polyamide. Width (W) - 69.0Cm X Depth (D) - 77.8Cm X Height (H) - 123.5-133.5Cm X Seat Height (Sh) - 49.5-59.5 Cm.The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Of Visitorschair As Per Design Approve As Per Order Shall Have An Overall Size Of 609Mm W X 982Mm H X 642Mm D. Seat /Back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D). Back Size: 47.7 Cm. (W) X 60.1 Cm. (D). Visitor Tubular Frame: The Tubular Frame Should Becantilever Type And Made Of Ø2.54± 0.03 Cm X 0.02 ± 0.016Cm Thick Ss 202 Tube. The Back Should Beconnected To Frame Through Chrome Plated High Pressure Die Case Connector Piece. Overall Dimensions Of Chair. Seat Height -44.8Cm. Height -98.2Cm. Width & Depth Of Chair As Measured From Base - Width-60.9 Cm And Depth-64.2 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofvsdu-8 Glassdoor Verticla Sliding Storage Unit As Per Design Approve As Per Order Shall Have An Overall Size Of 900Mm(W) X 450Mm(D) X 1830Mm(H). The Top Shall Be Metal Top (1 Mm Add In Unit Height) .The Rigid Knock Down Construction , Back , Sides And Door Shall Be Made From 0.7 Mm High Yield Strength Crca ,Rest In 0.8 Mm Crca . Crca - D Grade As Per Is-513 . Sliding Door Arrangement Shall Have Sliding Door Wth Top Hanging Arrangement To Prevent Derailment . Each Door Shall Be Provided With 2 Plastic Roller Having Steel Ball Bearing For Smooth Movement Of Door & Less Noise .Vsdu 8 Shall Have Glass Door For Visibility Of The Content . Locking Shall Be 5 Lever Cam Lock For Safe Locking . Handle Shall Be Plastic Flush & Recessed Handle . Shelving Shall Have Height Wise Adjustable Shelf Mounting . Uniformly Distributed Load Capacity Of The Shelf Is 40 Kg Maximum . Vsdu - 8Shall Have 4 No. Of Adjustable Full Shelves . Accessories Optional Shall Be Cradle With Pipes For Hanging Godrej Instadex Files . Leveler Shall Be Screw Type Leveler With Hex Plastic Base And Overall Finish Shall Be Epoxy Polyester Coated To The Thickness Of 50 Microns . For Vsdu 8 - A4 Size Box File Can Be Stored Vertically On Four Shelves And Clear Space Above Fifth Shelf Is 220Mm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofrhine V3 1-Seater Recliner As Per Design Approve As Per Order Shall Have An Overall Size Of 830Mm (W) X 740Mm (D) X 1000Mm (H) X 440Mm (Sh). Stitching: Thread :Nylon 40 Tktpitch: Gap 2 Mm From Border + Pitch 6 Per Inch Leather/Pvc/Pu/Fabric:Full Pu Leatherette. Frame Material (Tropical Wood / Pine Wood/ Rubber Wood): Rubberwood Moisture Content :12 – 14 % Seat Foam: (Density, Type) :24 Density Foam + Pocket Spring (49 Nos. Of Dia 50 Mm / Seat) Spring Rod Dia =1.6 Mm+ 24 Density Foam. Back Foam: (Density, Type) :24 Density Foam + Polyester Fabric (Recron).Armrest Foam: (Density, Type) :24 Density Foam. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofbobbin 2-Seater Sofa As Per Design Approve As Per Order Shall Have An Overall Size Of 1500Mm (W) X 820Mm (D) X 900Mm (H) X 440Mm (Sh). Understructure Should Be Made Up Of Pinewood Members. Pinewood Are Of Cross Sections 22 X 64, 34 X 64Mm & 16 X 35Mm Without Having Major Knots & Defects On The Surface. 3Mm Mdf Is Stapled On The Sem Front Baton. Zigzag Spring Of Dia 3.8Mm Is Mounted On The Seat Structure Using Plastic Spring Mounting Clips Support & Additional Cushioning Purpose. Non Woven Fabric Is Stapled On The Seat Structure Frame Above The Spring Assembly To Avoid Direct Contact Between The Metal Springs And The Seat Foam. This Prevents Seat Fo From Tearing Powder Coated Ms Support Pipe Is Fitted With The Wooden Seat Frame To Give Additional Strengt The Structure. Complete Understructure Is Made By Gluing, Nailing & Stapling Foam Seat Is Made Of Pu Foam With Density 28 Kg/M3 With A Top Layer Of Supersoft Pu Foam With Density 33 Kg/M3 Seat Front Bottom Is Stapled With The Pu Foam With Density 28 Kg/M3 Upholstery: Seat Upholstery Is Made In Polyester Fabric With Partitions. Understructure. Understructure Is Made Up Of Combination Of Plywood & Pinewood Members. Plywood Is 12:1Mm Thk. [Moisture Resistance & Termite Proof As Per Is:303] & Pinewood Are Of Cross Sections 16 X 35Mm, 12 X 22Mm & 16 X 74Mm And Triangular Batons Of 22 X 75 Without Having Major Knots & Defects On The Surface Hdpe Sheet Is Stapled On The Back And Front Of The Structure And On The Ear Ply. Foam Backrest Is Made Up Of Combination Of Pu Foam With Density 28 Kg/M3 And 32 Kg/M3 Super-Soft On The Front Lumber Portion And The Shoulder Area Has Supersoft Pu Foam With Density 32 Kg/M3. This Is Covered Wil A Top Layer Of 200 Gsm Recron Sheet. The Top Surface Has Foam With Density 32 Kg/M3 And A Layer Of 200 Gsm Recron Sheet. Complete Back Surface & Underarm Of Backrest Is Glued With The Pu Foam With Density 28 Kg/M. Upholstery Backrest Upholstery Is Made In Polyester Fabric Jacket With Recron Sheet Cushions Of 200 Gsm Sandwitched Between A Layer Of White Non-Woven Cloth Of 30 Gsm. The Upholstered Jacket Has A Button At The Front Armrest [Lh & Rh]. Understructure: Understructure Is Made Of Combination Of Plywood & Pinewood Members. Plywood Is 12±1Mm Thk [Moisture Resistance & Termite Proof As Per Is:303] & Pinewood Are Of Cross Section 16X35mm Without Having Major Knots & Defects On The Surface. 2Mm Cardboard And Hdpe Sheet Is Stapled On The Structure To Provide A Surface For Sticking Foam. Foam: Armrest Is Made Of Pu Foam With Density 28 Kg/M3, Upholstery: Armrest Upholstery Is Made In Polyester Fabric. Legs: Option A: Rubberwood [Grade-A] Legs With The M8 Stud For Fitting At The Bottom Surface Of The Armrest Lh & Rh. Legs Are Coated With Pu Clear Lacquer Coat [Black Matt Finish] [Min. Hardness - 1H]. Option B: Plastic Injection Moulded Legs Made Of Material Pa-6 With Insert Of M8 Stud For Fitting At The Bottom Surface Of The Armrest Lh & Rh. Plastic Legs Are Black [Matte Finish]. Assembly Upholstered Seat, Backrest, Armrest-Lh & Armrest-Rh Are Assembled Together With The M8 Bolts, Nuts & Washer. Then A Non-Woven Is Stapled On The Bottom Surface To Cover The Structure. Packet: Each Packet Contains One Assembled Sofa Without Legs And A Separate Hardware Packet Containing 4 Nos, Of Rubberwood Legs/ Plastic Injection Moulded Legs. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofarbor Coffee Table As Per Design Approve As Per Order Shall Have An Overall Size Of 1200Mm (W) X600mm (D) X 450Mm (H). Material: Table Structure Consists Of Visible Panels Are 18Mm Thk Plt Panles. Hardware: High Quality Fasteners Are Used. Construction: Knock Down. Finish: 18Mm Thk Pre Laminated Particle Boards With Laminate Of Rimini Walnut Suede Finish And Matching Lipping With Matt Finish. 18Mm Thk Pre Laminated Particle Boards With Laminate Of Black Ink Suede Finish And Matching Lipping With Matt Finish. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofdisplay Expo Small As Per Design Approve As Per Order Shall Have An Overall Size Of 1200Mm (W) X400mm (D) X 754Mm (H). Material : 15 Mm Particle Board. Lamination : Melamine Impregnated Paper Construction : Knock Down. Glass : 6 Mm Tampered. Hinges : Metal In Chrome Plated. Handles : Metal In Powder Coated Load Bearing Capacity Of Each Shelf : 35 Kg. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Of Mayfair Main Desk + Eru + Pedestal As Per Design Approve As Per Order Shall Have An Overall Size Of Main Desk : 1200Mm (W) X 600Mm (D) X 750Mm (H),Eru : 900Mm (W) X 450Mm (D) X 750Mm (H) + Pedestal : 390Mm (W) X 435Mm (D) X 529Mm (H). The Top Shall Be In White Cedar And Black And Shall Be 18 Mm Plb With Pvc Lipping.The Side Panels Shall Be 18 Mm Thickplt With Pvc .The Modesty Panel Shall Be 18 Mm Thick Plt.The Modesty Panel Shall Be In A Combination Of Black & White Cedar. The Top Is 18 Mm Thick Plb . The Two Drawer Mobile Pedestal Is Available In One Size .The Top And Drawer Fronts Shall Be In White Cedar While The Other Components Shall Be In Black. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofmarvel- High Back Chair As Per Design Approve As Per Order Shall Have An Overall Size Of 761Mm W X 1127-1302Mm H X 761Mm D. Seat/Back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression.The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D). High Back Size: 47.7 Cm. (W) X 76.4 Cm. Armrests: The Armrest Top Should Be Moulded From Polyurethane(Pu) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S. E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. Active Bio-Synchro Mechanism : The Adjustable Tilting Mechanism Should Be Designed With The Following Features: 360 Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat/Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Be Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment : Seat Depth Adjustment Should Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Be Of 6.0±0.5 Cm. Adjustable Back Support: Back Frame Should Be Connected To The Up/Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment: The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly: The Pedestal Should Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 65.0 ± 0.5Cm. Pitch-Center Dia.(75.0 ± 1.0Cm. With Castors). Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter. Overall Dimensions Of Chair Seat Height -43.1-53.1Cm Height -112.7-130.2Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofmarvel- Visitors Chair As Per Design Approve As Per Order Shall Have An Overall Size Of 609Mm W X 982Mm H X 642Mm D. Seat /Back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D). Back Size: 47.7 Cm. (W) X 60.1 Cm. (D). Visitor Tubular Frame: The Tubular Frame Should Becantilever Type And Made Of Ø2.54± 0.03 Cm X 0.02 ± 0.016Cm Thick Ss 202 Tube. The Back Should Beconnected To Frame Through Chrome Plated High Pressure Die Case Connector Piece. Overall Dimensions Of Chair. Seat Height -44.8Cm. Height -98.2Cm. Width & Depth Of Chair As Measured From Base - Width-60.9 Cm And Depth-64.2 Cm. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed). , Supply And Placement Ofstorwel Plain Almirah As Per Design Approve As Per Order Shall Have An Overall Size Of 916Mm(W) X 486Mm(D) X 1981Mm(H). Overall Size Should Be In Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. It Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10). Plenty Of Colour Options And Shelving Options Shall Be Available. The Manufacturer Should Be A Member Of Bifma & Igbc (Indian Green Building Council) & Should Have Aiota, Griha, Green Pro, Iaq And Green Guard Certification (From Ul) For Few Of Its Products. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 45001:2018 And Iso 50001:2018 Are Mandatory. All The Iso Certificates Should Be Obtained From Nabcb (National Accreditation Board For Certification Bodies) Accredited Organization Otherwise Certificates Will Not Be Accepted. (Dimension & Variation ±1.0Cm Allowed).

INR 1000 /-

INR 5000.0 /-

Refer document

Name of Work: Supply of Furniture

Sl. No.	Item Description
1	Furniture
2	Supply and placement of Coeval- Main Desk as per design approve as per order shall have an overall size of Main desk : 2100mm (W) x 900mm (D) x 750mm (H) & ERU : 1500mm (W) x 550mm (D) x 750mm (H). The main top should be made of 36mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. The side panel should also be made of 36mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. Modesty should be made of painted 8mm thick toughened glass (as per IS:2835) fixed on a metal frame made of stainless steel tubes Grade 304 of cross section 19x19x2 thick and 3mm thick Stainless steel plates with the help of both side adhesive tape. The metal plate should be made of 8mm thick Stainless Steel GRADE 304.It is fixed between the main top panel and Side panel on both sides of the desk. The leather pad should be made of 1.2mm Thk GI sheet (AS PER IS:277) with genuine leather on top side and wool polyester of 350g/m^2 density Felt on Bottom side. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
3	Supply and placement ofCoeval Wardrobe Unit as per design approve as per order shall have an overall size of 800mm (W) x 520mm (D) x 1850mm (H). The top panel should be made of 36mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. The side panel should also be made of 18mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. The bottom panel should also be made of 36mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. The back panels should also be made of 18mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. The door panels should be made of 18mm thk medium density fibre board as per IS:12406 with pigmented polyurethane coating on both sides. The Door Lock plate plate should be made of 3mm thick Stainless Steel GRADE 304 LED strip light shall be provided beneath Top panel on inside. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
4	Supply and placement ofLa Sede- High Back Chair as per design approve as per order shall have an overall size of 761mm W x 761mm D x 1140 – 1315mm H. SEAT/BACK ASSEMBLY : The Cushioned seat should bemade of Injection molded Plastic outer & inner. Plastic Inner should beupholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgffor 25% compression.The Cushioned back should bemade of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D). BACK SIZE : 47.5 cm. (W) x 77 cm. (D). ARMRESTS: The armrest top should bemoulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism should bedesigned with the following features: • 360° revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should bemade up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT: Seat depth adjustment should beintegrated in the seat through a sliding mechanism. Seat depth adjustment range should beof 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should beconnected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY The pedestal should beHigh Pressure Die cast polishedAluminium and fitted with 5 nos. twin wheel castors. The pedestal should be65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS:The twin wheel castors should beinjection mouldedin Black Polypropylene.Overall Dimensions of Chair Seat Height -44.5 to 54.5 cm. Height -114.0-131.5 cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
5	Supply and placement ofLa Sede- Visitors Chair as per design approve as per order shall have an overall size of 609mm (W) x 647mm (D) x 982mm (H). SEAT/BACK ASSEMBLY : The Cushioned seat should bemade of Injection molded Plastic outer & inner. Plastic Inner should beupholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgffor 25% compression.The Cushioned back should bemade of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D). BACK SIZE : 46.5 cm. (W) x 59.5 cm. (D). Visitor TUBULAR FRAME: The tubular frame should becantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should beconnected to frame through chrome plated high pressure die case connector piece. Overall Dimensions of Chair Seat Height -46.2 cm. Height -98.2 cm. Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.7 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
6	Supply and placement ofVertex L-Shaped Sofa as per design approve as per order shall have an overall size of 2655mm (W1) x2105mm (W2) x 900mm (H). Finish Color - Toffee + Dark grey Net Weight (kg) - 159, Seat Height (cm) - 45.5, Upholstery Material - Fabric + Syn Leather, Primary Material - Fabric. Back upper cushion is made of 32D-50 mm thick super soft foam with 32D- 25mm thick super soft topper foam. Back lumber cushion entirely made of 32D wedge shaped super soft foam. S’ Spring suspension system built in the base frame for a bouncy feel. Polypropylene with 20% Talc filled High impact durable legs. Solid pinewood back frame. 28D – 75 mm thick + 32D – 25 mm thick super soft foam With 32D – 25 mm thick super soft topper foam. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
7	Supply and placement ofOpulent Plus Coffee Table as per design approve as per order shall have an overall size of 1450mm (W) x850mm (D) x 380mm (H). TABLE TOP METERIALS TEMPERED GLASS, Color : SUPER WHITE IN BEIGE PAINTING, BODY : MDF, COLOR: GREY-WHITE HIGH GLOSSY. Type of Caoting (PU /Melamine/Paper/Paper plus PU/Lamination) : PU LEGS: RUBBER WOOD, Color : WALNUT PAINTING. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
8	Supply and placement ofStripe 1-Seater Recliner as per design approve as per order shall have an overall size of 790mm (W) x930mm (D) x 1020mm (H). Material should beof high quality leather with top grain leather at touch points. Sectioned backrest with manual push-back mechanism to slide into reclining position. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
9	Supply and placement ofCedar 1-Seater Sofa as per design approve as per order shall have an overall size of 640mm (W) x860mm (D) x 880mm (H) x 450mm (SH). Distinct-looking mid-back sofa with a curved backrest and angular wooden armrests. Crafted from long lasting Sheesham wood, making it extremely sturdy and resilient to insects, fungus, and mold. Recron-filled cushions for back support, and soft foam for comfortable seating. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
10	Supply and placement ofOpulent Coffee Table as per design approve as per order shall have an overall size of 1310mm (W) x700mm (D) x 380mm (H). TABLE TOP METERIALS TEMPERED GLASS, Color : SUPER WHITE IN BEIGE PAINTING, BODY : MDF, COLOR: GREY-WHITE HIGH GLOSSY. Type of Caoting (PU /Melamine/Paper/Paper plus PU/Lamination) : PU LEGS: RUBBER WOOD, Color : WALNUT PAINTING. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
11	Supply and placement ofDisplay Expo Small as per design approve as per order shall have an overall size of 1200mm (W) x400mm (D) x 754mm (H). Material : 15 mm particle board. Lamination : Melamine impregnated paper Construction : Knock down. Glass : 6 mm tampered. Hinges : Metal in chrome plated. Handles : Metal in powder coated Load bearing capacity of each shelf : 35 Kg. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
12	Supply and placement of Mayfair Main Desk + ERU + Pedestal as per design approve as per order shall have an overall size of Main Desk : 1200mm (W) x 600mm (D) x 750mm (H),ERU : 900mm (W) x 450mm (D) x 750mm (H) + Pedestal : 390mm (W) x 435mm (D) x 529mm (H). The Top shall be in white cedar and black and shall be 18 mm PLB with PVC lipping.The side panels shall be 18 mm thickPLT with PVC .The Modesty panel shall be 18 mm thick PLT.The Modesty panel shall be in a combination of black & white cedar. The top is 18 mm thick PLB . The two drawer mobile pedestal is available in one size .The top and drawer fronts shall be in white cedar while the other components shall be in black. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
13	Supply and placement ofMarvel- High Back Chair as per design approve as per order shall have an overall size of 761mm W x 1127-1302mm H x 761mm D. SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D). HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm. ARMRESTS: The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: 360" revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors). TWIN WHEEL CASTORS:The twin wheel castors should beinjection moulded in black PP having 6.0± 0.1cm wheel Diameter. Overall Dimensions of Chair Seat Height -43.1-53.1cm Height -112.7-130.2cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
14	Supply and placement ofMarvel- Visitors Chair as per design approve as per order shall have an overall size of 609mm W x 982mm H x 642mm D. SEAT /BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D). BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D). Visitor TUBULAR FRAME: The tubular frame should becantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should beconnected to frame through chrome plated high pressure die case connector piece. Overall Dimensions of Chair. Seat Height -44.8cm. Height -98.2cm. Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.2 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
15	Supply and placement ofStorwel Plain Almirah as per design approve as per order shall have an overall size of 916mm(W) x 486mm(D) x 1981mm(H). Overall size should be in welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
16	Supply and placement of Grandeur 6 FT Main Table + ERU as per design approve as per order shall have an overall size of Main Desk : 1800mm (W) x 2100mm (D) x 740mm (H). MAIN WORKTOP :Made of 43mm Thick (±1) combination of MDF and particle board with top veneer facecoated with clear lacquer. All edges are edge banded with matching 1mm thick veneerlipping.LEATHER PAD:Made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. Thisleather pad is fixed to main top panel. DRAWER UNIT:Top panel and drawer unit modesty panel is made of 43mm Thick (±1) combination ofMDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade andapproved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thickPVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on topsurface. Drawer unit is provided with soft closing channels for smooth opening and closing.Drawer unit is secured with side central lock. MODESTY:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. Modesty is fitted with aluminum trims. ERU WORKTOP :Made of 43mm Thick (±1) combination of MDF and particle board with top veneer facecoated with clear lacquer. All thickness edges are edge banded with matching lipping. UNDERSTRUCTURE AND ERU HINGE DOOR UNIT:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. Door is fixed with soft closing hinges and handle is provided for ease of opening.ERU is secured with side central lock. ACCESS FLAP WITH POWER BOX:Soft closing access flap with power box contains 3 Universal Sockets, 2 USB powerpoints, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6connections. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
17	Supply and placement of Grandeur 4FT Back Unit Body & Shutter as per design approve as per order shall have an overall size of 2400mm (W) x 470mm (D) x 1226mm (H). CONSTRUCTION AND MATERIAL: Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Backpanel(0.5mm CRCA), Top Bottom stiffener (1.2mm CRCA) and End Cover(0.6mm CRCA).Shelves are 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513). Storage body is powder coated with Epoxy Polyester to the thickness of 50 microns(+/-10 micron). VENEER DOOR: Made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clearlacquer. All edges are edge banded with matching 1mm thick veneer lipping. Door isprovided with soft closing hinge. Handle is also provided for ease of opening. Storage issecured with 3 way cam lock. GLASS DOOR: Made from the combination of aluminium alloy (63400) extrusion and 4mm cleartoughened glass. Aluminium extrusion of glass doors are powder coated with Epoxy Polyester to the thickness of 50 microns (+/-10 micron). Handle is provided for ease ofopening. RH Glass Door is provided with 3 way cam lock for security. Supplying and placing in position Back unit Shutter of the following specifications. 2400m (W) x 470mm (D) x 1226mm (H). CONSTRUCTION AND MATERIAL: Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Backpanel(0.5mm CRCA), Top Bottom stiffener (1.2mm CRCA) and End Cover(0.6mm CRCA).Shelves are 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513). Storage body is powder coated with Epoxy Polyester to the thickness of 50 microns(+/-10 micron). VENEER DOOR:Made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clearlacquer. All edges are edge banded with matching 1mm thick veneer lipping. Door isprovided with soft closing hinge. Handle is also provided for ease of opening. Storage issecured with 3 way cam lock. GLASS DOOR: Made from the combination of aluminium alloy (63400) extrusion and 4mm cleartoughened glass. Aluminium extrusion of glass doors are powder coated with EpoxyPolyester to the thickness of 50 microns (+/-10 micron). Handle is provided for ease ofopening. RH Glass Door is provided with 3 way cam lock for security. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
18	Supply and placement of Grandeur Coffee Table as per design approve as per order shall have an overall size of 800mm (W) x 800mm (D) x 320mm (H). TOP AND BOTTOM PANEL:Made of 36mm Thick (±1) combination of MDF and particle board with top veneer facecoated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. SIDE PANEL:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. Side panels are fitted with aluminum trim. SKIRTING:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
19	Supply and placement of Grandeur Side Table as per design approve as per order shall have an overall size of 450mm (W) x 450mm (D) x 370mm (H). TOP AND BOTTOM PANEL: Made of 36mm Thick (±1) combination of MDF and particle board with top veneer facecoated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. SIDE PANEL:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. Side panels are fitted with aluminum trim. SKIRTING:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
20	Supply and placement ofLa Sede- High Back Chair as per design approve as per order shall have an overall size of 761mm W x 761mm D x 1140 – 1315mm H. SEAT/BACK ASSEMBLY : The Cushioned seat should bemade of Injection molded Plastic outer & inner. Plastic Inner should beupholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgffor 25% compression.The Cushioned back should bemade of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D). BACK SIZE : 47.5 cm. (W) x 77 cm. (D). ARMRESTS: The armrest top should bemoulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism should bedesigned with the following features: • 360° revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should bemade up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT: Seat depth adjustment should beintegrated in the seat through a sliding mechanism. Seat depth adjustment range should beof 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should beconnected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY The pedestal should beHigh Pressure Die cast polishedAluminium and fitted with 5 nos. twin wheel castors. The pedestal should be65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS:The twin wheel castors should beinjection mouldedin Black Polypropylene.Overall Dimensions of Chair Seat Height -44.5 to 54.5 cm. Height -114.0-131.5 cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
21	Supply and placement ofLa Sede- Visitors Chair as per design approve as per order shall have an overall size of 609mm (W) x 647mm (D) x 982mm (H). SEAT/BACK ASSEMBLY : The Cushioned seat should bemade of Injection molded Plastic outer & inner. Plastic Inner should beupholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgffor 25% compression.The Cushioned back should bemade of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D). BACK SIZE : 46.5 cm. (W) x 59.5 cm. (D). Visitor TUBULAR FRAME: The tubular frame should becantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should beconnected to frame through chrome plated high pressure die case connector piece. Overall Dimensions of Chair Seat Height -46.2 cm. Height -98.2 cm. Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.7 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
22	Supply and placement ofVertex L-Shaped Sofa as per design approve as per order shall have an overall size of 2655mm (W1) x2105mm (W2) x 900mm (H). Finish Color - Toffee + Dark grey Net Weight (kg) - 159, Seat Height (cm) - 45.5, Upholstery Material - Fabric + Syn Leather, Primary Material - Fabric. Back upper cushion is made of 32D-50 mm thick super soft foam with 32D- 25mm thick super soft topper foam. Back lumber cushion entirely made of 32D wedge shaped super soft foam. S’ Spring suspension system built in the base frame for a bouncy feel. Polypropylene with 20% Talc filled High impact durable legs. Solid pinewood back frame. 28D – 75 mm thick + 32D – 25 mm thick super soft foam With 32D – 25 mm thick super soft topper foam. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
23	Supply and placement ofArbor Coffee Table as per design approve as per order shall have an overall size of 1200mm (W) x600mm (D) x 450mm (H). Material: Table structure consists of Visible panels are 18MM thk PLT panles. Hardware: high quality fasteners are used. Construction: Knock Down. Finish: 18mm THK Pre Laminated Particle Boards with laminate of Rimini Walnut suede finish and matching lipping with matt finish. 18mm THK Pre Laminated Particle Boards with laminate of Black Ink suede finish and matching lipping with matt finish. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
24	Supply and placement ofRhine V3 1-Seater Recliner as per design approve as per order shall have an overall size of 830mm (W) x 740mm (D) x 1000mm (H) x 440mm (SH). Stitching: thread :nylon 40 tktpitch: gap 2 mm from border + pitch 6 per inch leather/pvc/pu/fabric:full pu leatherette. frame material (tropical wood / pine wood/ rubber wood): rubberwood moisture content :12 – 14 % seat foam: (density, type) :24 density foam + pocket spring (49 nos. of dia 50 mm / seat) spring rod dia =1.6 mm+ 24 density foam. back foam: (density, type) :24 density foam + polyester fabric (recron).armrest foam: (density, type) :24 density foam. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
25	Supply and placement ofBobbin 2-Seater Sofa as per design approve as per order shall have an overall size of 1500mm (W) x 820mm (D) x 900mm (H) x 440mm (SH). Understructure should be made up of pinewood members. Pinewood are of cross sections 22 x 64, 34 x 64mm & 16 x 35mm without having major knots & defects on the surface. 3mm MDF is stapled on the sem front baton. Zigzag spring of dia 3.8mm is mounted on the seat structure using plastic spring mounting clips support & additional cushioning purpose. Non woven fabric is stapled on the seat structure frame above the spring assembly to avoid direct contact between the metal springs and the seat foam. This prevents seat fo from tearing Powder coated MS support pipe is fitted with the wooden seat frame to give additional strengt the structure. Complete understructure is made by gluing, nailing & stapling Foam Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 33 kg/m3 Seat front bottom is stapled with the PU foam with density 28 kg/m3 Upholstery: Seat upholstery is made in polyester fabric with partitions. Understructure. Understructure is made up of combination of plywood & pinewood members. Plywood is 12:1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 16 x 35mm, 12 x 22mm & 16 x 74mm and triangular batons of 22 x 75 without having major knots & defects on the surface HDPE sheet is stapled on the back and front of the structure and on the ear ply. Foam Backrest is made up of combination of PU foam with density 28 kg/m3 and 32 kg/m3 super-soft on the front lumber portion and the shoulder area has supersoft PU foam with density 32 kg/m3. This is covered wil a top layer of 200 gsm recron sheet. The top surface has foam with density 32 kg/m3 and a layer of 200 gsm recron sheet. Complete back surface & underarm of backrest is glued with the PU foam with density 28 kg/m. Upholstery Backrest upholstery is made in polyester fabric jacket with recron sheet cushions of 200 gsm sandwitched between a layer of white non-woven cloth of 30 gsm. The upholstered jacket has a button at the front Armrest [LH & RH]. Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12±1mm thk [moisture resistance & termite proof as per IS:303] & pinewood are of cross section 16X35mm without having major knots & defects on the surface. 2mm cardboard and HDPE sheet is stapled on the structure to provide a surface for sticking foam. Foam: Armrest is made of PU foam with density 28 kg/m3, Upholstery: Armrest upholstery is made in polyester fabric. Legs: Option A: Rubberwood [Grade-A] legs with the M8 stud for fitting at the bottom surface of the Armrest LH & RH. Legs are coated with PU clear lacquer coat [black matt finish] [Min. hardness - 1H]. Option B: Plastic injection moulded legs made of material PA-6 with insert of M8 stud for fitting at the bottom surface of the Armrest LH & RH. Plastic legs are black [matte finish]. Assembly Upholstered seat, backrest, armrest-LH & armrest-RH are assembled together with the M8 bolts, nuts & washer. Then a non-woven is stapled on the bottom surface to cover the structure. Packet: Each packet contains one assembled sofa without legs and a separate hardware packet containing 4 nos, of rubberwood legs/ plastic Injection moulded legs. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
26	Supply and placement ofArbor Coffee Table as per design approve as per order shall have an overall size of 1200mm (W) x600mm (D) x 450mm (H). Material: Table structure consists of Visible panels are 18MM thk PLT panles. Hardware: high quality fasteners are used. Construction: Knock Down. Finish: 18mm THK Pre Laminated Particle Boards with laminate of Rimini Walnut suede finish and matching lipping with matt finish. 18mm THK Pre Laminated Particle Boards with laminate of Black Ink suede finish and matching lipping with matt finish. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
27	Supply and placement ofDisplay Expo Small as per design approve as per order shall have an overall size of 1200mm (W) x400mm (D) x 754mm (H). Material : 15 mm particle board. Lamination : Melamine impregnated paper Construction : Knock down. Glass : 6 mm tampered. Hinges : Metal in chrome plated. Handles : Metal in powder coated Load bearing capacity of each shelf : 35 Kg. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
28	Supply and placement of Mayfair Main Desk + ERU + Pedestal as per design approve as per order shall have an overall size of Main Desk : 1200mm (W) x 600mm (D) x 750mm (H),ERU : 900mm (W) x 450mm (D) x 750mm (H) + Pedestal : 390mm (W) x 435mm (D) x 529mm (H). The Top shall be in white cedar and black and shall be 18 mm PLB with PVC lipping.The side panels shall be 18 mm thickPLT with PVC .The Modesty panel shall be 18 mm thick PLT.The Modesty panel shall be in a combination of black & white cedar. The top is 18 mm thick PLB . The two drawer mobile pedestal is available in one size .The top and drawer fronts shall be in white cedar while the other components shall be in black. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
29	Supply and placement ofMarvel- High Back Chair as per design approve as per order shall have an overall size of 761mm W x 1127-1302mm H x 761mm D. SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D). HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm. ARMRESTS: The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: 360" revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors). TWIN WHEEL CASTORS:The twin wheel castors should beinjection moulded in black PP having 6.0± 0.1cm wheel Diameter. Overall Dimensions of Chair Seat Height -43.1-53.1cm Height -112.7-130.2cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
30	Supply and placement ofMarvel- Visitors Chair as per design approve as per order shall have an overall size of 609mm W x 982mm H x 642mm D. SEAT /BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D). BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D). Visitor TUBULAR FRAME: The tubular frame should becantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should beconnected to frame through chrome plated high pressure die case connector piece. Overall Dimensions of Chair. Seat Height -44.8cm. Height -98.2cm. Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.2 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
31	Supply and placement ofStorwel Plain Almirah as per design approve as per order shall have an overall size of 916mm(W) x 486mm(D) x 1981mm(H). Overall size should be in welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
32	Supply and placement ofImpress Main Desk with ERU and Pedestal as per design approve as per order shall have an overall size of 1800mm (W) x 900mm (D) x 750mm (H). Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
33	Supply and placement of Emerald Leather - High Back Chair as per design approve as per SEAT ASSEMBLY: The seat is made up of 12mm thick MR Grade plywood, layered with pocket spring coms, super soft foam of 32 kg/m3 density and edging foam of 28 kg/m3 dormity. A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette. BACK ASSEMBLY: The back assembly is made up of a combination of pinewood members, 12mm thick MR Grade plywood and 2mm thick cardboard, layered with slab stock foam of 28 kg/m3 density. A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette. ARMPAD ASSEMBLY: The amped assembly is made up of 6mm thick MR Grade plywood fixed with MS powder-coated brackets, Inyered with foam of 60 kg/m3 density, A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette. CENTER TILT WITH MULTI POSITION LOCK MECHANISM: The mechanism is designed with the following features: 360 revolving type. 3 position locking Till tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The Class 4 pneumatic height adjustment has stroke of 100.3 cm. PEDESTAL ASSEMBLY: The pedestal is made of high-pressure die-cast polished aluminum with a buffed outside surface and black color-coated internal surface, it is fitted with 5 castors and has a pitch-center diameter of 67.510.5 cm (77.5 10 cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black polyamide. WIDTH (W) - 69.0cm x DEPTH (D) - 77.8cm x HEIGHT (H) - 123.5-133.5cm x SEAT HEIGHT (SH) - 49.5-59.5 cm.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
34	Supply and placement of VisitorsChair as per design approve as per order shall have an overall size of 609mm W x 982mm H x 642mm D. SEAT /BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D). BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D). Visitor TUBULAR FRAME: The tubular frame should becantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should beconnected to frame through chrome plated high pressure die case connector piece. Overall Dimensions of Chair. Seat Height -44.8cm. Height -98.2cm. Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.2 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
35	Supply and placement ofVSDU-8 Glassdoor Verticla Sliding Storage Unit as per design approve as per order shall have an overall size of 900mm(W) x 450mm(D) x 1830mm(H). The top shall be Metal top (1 mm add in unit height) .The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - "D" Grade as per IS-513 . Sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise .VSDU 8 shall have glass door for visibility of the content . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush & recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . VSDU - 8shall have 4 no. of adjustable full shelves . Accessories optional shall be cradle with pipes for hanging godrej instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . For VSDU 8 - A4 size box file can be stored vertically on four shelves and clear space above fifth shelf is 220mm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
36	Supply and placement ofRhine V3 1-Seater Recliner as per design approve as per order shall have an overall size of 830mm (W) x 740mm (D) x 1000mm (H) x 440mm (SH). Stitching: thread :nylon 40 tktpitch: gap 2 mm from border + pitch 6 per inch leather/pvc/pu/fabric:full pu leatherette. frame material (tropical wood / pine wood/ rubber wood): rubberwood moisture content :12 – 14 % seat foam: (density, type) :24 density foam + pocket spring (49 nos. of dia 50 mm / seat) spring rod dia =1.6 mm+ 24 density foam. back foam: (density, type) :24 density foam + polyester fabric (recron).armrest foam: (density, type) :24 density foam. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
37	Supply and placement ofBobbin 2-Seater Sofa as per design approve as per order shall have an overall size of 1500mm (W) x 820mm (D) x 900mm (H) x 440mm (SH). Understructure should be made up of pinewood members. Pinewood are of cross sections 22 x 64, 34 x 64mm & 16 x 35mm without having major knots & defects on the surface. 3mm MDF is stapled on the sem front baton. Zigzag spring of dia 3.8mm is mounted on the seat structure using plastic spring mounting clips support & additional cushioning purpose. Non woven fabric is stapled on the seat structure frame above the spring assembly to avoid direct contact between the metal springs and the seat foam. This prevents seat fo from tearing Powder coated MS support pipe is fitted with the wooden seat frame to give additional strengt the structure. Complete understructure is made by gluing, nailing & stapling Foam Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 33 kg/m3 Seat front bottom is stapled with the PU foam with density 28 kg/m3 Upholstery: Seat upholstery is made in polyester fabric with partitions. Understructure. Understructure is made up of combination of plywood & pinewood members. Plywood is 12:1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 16 x 35mm, 12 x 22mm & 16 x 74mm and triangular batons of 22 x 75 without having major knots & defects on the surface HDPE sheet is stapled on the back and front of the structure and on the ear ply. Foam Backrest is made up of combination of PU foam with density 28 kg/m3 and 32 kg/m3 super-soft on the front lumber portion and the shoulder area has supersoft PU foam with density 32 kg/m3. This is covered wil a top layer of 200 gsm recron sheet. The top surface has foam with density 32 kg/m3 and a layer of 200 gsm recron sheet. Complete back surface & underarm of backrest is glued with the PU foam with density 28 kg/m. Upholstery Backrest upholstery is made in polyester fabric jacket with recron sheet cushions of 200 gsm sandwitched between a layer of white non-woven cloth of 30 gsm. The upholstered jacket has a button at the front Armrest [LH & RH]. Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12±1mm thk [moisture resistance & termite proof as per IS:303] & pinewood are of cross section 16X35mm without having major knots & defects on the surface. 2mm cardboard and HDPE sheet is stapled on the structure to provide a surface for sticking foam. Foam: Armrest is made of PU foam with density 28 kg/m3, Upholstery: Armrest upholstery is made in polyester fabric. Legs: Option A: Rubberwood [Grade-A] legs with the M8 stud for fitting at the bottom surface of the Armrest LH & RH. Legs are coated with PU clear lacquer coat [black matt finish] [Min. hardness - 1H]. Option B: Plastic injection moulded legs made of material PA-6 with insert of M8 stud for fitting at the bottom surface of the Armrest LH & RH. Plastic legs are black [matte finish]. Assembly Upholstered seat, backrest, armrest-LH & armrest-RH are assembled together with the M8 bolts, nuts & washer. Then a non-woven is stapled on the bottom surface to cover the structure. Packet: Each packet contains one assembled sofa without legs and a separate hardware packet containing 4 nos, of rubberwood legs/ plastic Injection moulded legs. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
38	Supply and placement ofArbor Coffee Table as per design approve as per order shall have an overall size of 1200mm (W) x600mm (D) x 450mm (H). Material: Table structure consists of Visible panels are 18MM thk PLT panles. Hardware: high quality fasteners are used. Construction: Knock Down. Finish: 18mm THK Pre Laminated Particle Boards with laminate of Rimini Walnut suede finish and matching lipping with matt finish. 18mm THK Pre Laminated Particle Boards with laminate of Black Ink suede finish and matching lipping with matt finish. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
39	Supply and placement ofDisplay Expo Small as per design approve as per order shall have an overall size of 1200mm (W) x400mm (D) x 754mm (H). Material : 15 mm particle board. Lamination : Melamine impregnated paper Construction : Knock down. Glass : 6 mm tampered. Hinges : Metal in chrome plated. Handles : Metal in powder coated Load bearing capacity of each shelf : 35 Kg. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
40	Supply and placement of Mayfair Main Desk + ERU + Pedestal as per design approve as per order shall have an overall size of Main Desk : 1200mm (W) x 600mm (D) x 750mm (H),ERU : 900mm (W) x 450mm (D) x 750mm (H) + Pedestal : 390mm (W) x 435mm (D) x 529mm (H). The Top shall be in white cedar and black and shall be 18 mm PLB with PVC lipping.The side panels shall be 18 mm thickPLT with PVC .The Modesty panel shall be 18 mm thick PLT.The Modesty panel shall be in a combination of black & white cedar. The top is 18 mm thick PLB . The two drawer mobile pedestal is available in one size .The top and drawer fronts shall be in white cedar while the other components shall be in black. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
41	Supply and placement ofMarvel- High Back Chair as per design approve as per order shall have an overall size of 761mm W x 1127-1302mm H x 761mm D. SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D). HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm. ARMRESTS: The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: 360" revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors). TWIN WHEEL CASTORS:The twin wheel castors should beinjection moulded in black PP having 6.0± 0.1cm wheel Diameter. Overall Dimensions of Chair Seat Height -43.1-53.1cm Height -112.7-130.2cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
42	Supply and placement ofMarvel- Visitors Chair as per design approve as per order shall have an overall size of 609mm W x 982mm H x 642mm D. SEAT /BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D). BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D). Visitor TUBULAR FRAME: The tubular frame should becantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should beconnected to frame through chrome plated high pressure die case connector piece. Overall Dimensions of Chair. Seat Height -44.8cm. Height -98.2cm. Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.2 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).
43	Supply and placement ofStorwel Plain Almirah as per design approve as per order shall have an overall size of 916mm(W) x 486mm(D) x 1981mm(H). Overall size should be in welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, IAQ and Green Guard Certification (from UL) for few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. (Dimension & Variation ±1.0cm allowed).