Military Engineer Services-MES has published Tender For Special Repairs To Security Fencing Of Inliving Barracks At Ts Avadi Under Age(I) Navy Chennai.. Submission Date for this Tender is 26-02-2024. Wire Fencing Tenders in avadi Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Feb-2024 | Corrigendum 1 | BOQ | 19-02-2024 |
| 2 | 19-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-02-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling of mild steel Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings,including removing ofrusted unserviceable wire from work site and keep serviceable wire for reused in safe custody all as directed. |
| 2 | Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in Concrete, brick work, masonry, etc., including taking out embedded portion and making good disturbed ground complete all as specified. Note :- The vertical height above GL shall be measured for the purpose of payment towards work done) |
| 3 | Excavating in post holes in soft/ loose soil ( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth or broken rubble mixed with earth around , in layer not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50 M complete all as specified. |
| 4 | Material and labour for plain cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundations/mass concrete complete all as specified. |
| 5 | Material and labour for MS iron in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe-290-Gde E-165 all as specified and directed. |
| 6 | Material and labour for Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut ,exc 10 but n exc 15cm long and11 to 15 mm dia. of shank complete all as specified. |
| 7 | Material and labour for Mild steel round bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chain link mattresses, as in tie bar strengthing and fising with nuts & bolts complete all as specified. |
| 8 | Material and labour for preparation of new steel surfacesof any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chromeprimer complete all as specified. |
| 9 | Material and labour for preparation of new steel surfacesof any description not otherwise described not exc.10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chromeprimer complete all as specified. |
| 10 | Supply only 4 mm dia galvanised steel wire, (Hot dipped galvanised), 75 mm x 75 mm mesh, made up into mattresses or cages, all as specified. |
| 11 | Fixing only chain link fencing to post old or new including line wires, any mesh , size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as directed. |
| 12 | Removing excavated material (soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified. |
| 13 | Removing building material other than soil to a distance of exc 1.5 kms beyond the lead included in the rates, including loading, unloading & stacking at the destination all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
