Military Engineer Services-MES has published Tender For Repair And Maintenance Of Water Supply Lines Incl Main Pipe Line, Valves, Valve Chambers, Pump Sets And Connected Items Incl Cleaning Of Oht And Ug Sumps At Oaf Under Ge 970 Ews. Submission Date for this Tender is 27-02-2024. Submersible Pump Tenders in srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 20-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-02-2024 |
Sl. No. | Item Description |
1 | Excavationintrenchesnotexc 1.5 M wideandnotexc1.5 Mindepthandgettingoutin soft/loosesoil for taking out/laying of pipes complete allasspecifiedanddirected. |
2 | Returning, filling inincludingspreading, levelling, wateringandwellramminginlayersnotexceeding25 cm complete allasspecifiedanddirected. |
3 | Removing surplus soil to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed. |
4 | Taking up or down old GI/PPR pipe of following sizes from excavated trenches including removing of fittings all as directed for necessary replacement/relaying of serviceable GI pipe complete all as specified and directed. |
5 | (a)100 mm dia |
6 | (b)80 mm dia |
7 | (c)50 mm dia |
8 | (d)40 mm dia |
9 | (e)25 mm dia |
10 | (f)20 mm dia |
11 | (g) 15 mm dia |
12 | Relaying of serviceable GI pipe retrieved from item no 04 after removal of scaling, cleaning and flushing etc including supply and fixing of new fittings any grade in trenches and testing for following sizes complete all as specified and directed. |
13 | (a)100 mm dia |
14 | (b)80 mm dia |
15 | (c)50 mm dia |
16 | (d)40 mm dia |
17 | (e)25 mm dia |
18 | (f)20 mm dia |
19 | (g) 15 mm dia |
20 | Refixing only serviceable GI pipe of following sizes in short lenth (less than 03 mtr) after removal of scaling, cleaning and flushing etc including supply and fixing of new fittings any grade, in wall, floor or in ceiling and testing for following sizes complete all as specified and directed. |
21 | (a) 50 mm dia |
22 | (b) 40 mm dia |
23 | (c) 25 mm dia |
24 | (d) 20 mm dia |
25 | (e) 15 mm dia |
26 | Supply, fixing and testing of GI pipe of medium grade including all GI fittings laid in trenchesfor the following sizes complete all as specified and directed. |
27 | (a)100 mm dia |
28 | (b)80 mm dia |
29 | (c)50 mm dia |
30 | (d)40 mm dia |
31 | (e)25 mm dia |
32 | (f)20 mm dia |
33 | (g) 15 mm dia |
34 | Supply and fixing in replacement of PPR pipes 3- layer SDR 7.4 of outer diameter of pipes as following UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply all PPR plain & brass threaded polypropylene random fittings laid in trenches including fittings and testing complete all as specified and directed. (Note : Excavation, earthwork & fittings shall deemed to be include in this unit rate item) |
35 | (a) 20 mm dia. |
36 | (b) 25 mm dia. |
37 | (c) 32 mm dia. |
38 | (d) 50 mm dia. |
39 | (e) 63 mm dia. |
40 | (f) 90 mm dia. |
41 | Making connection of PPR distribution branch with PPR main ofsizes 16 mm to 40 mm by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed. |
42 | Making connection of PPR distribution branch with PPR main ofsizes 50 mm to 75 mm by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed. |
43 | Supply and fixing in replacement gun metal gate valve of size 15mm dia including connection and testing complete all as specified and directed. |
44 | Supply and fixing in replacement gun metal gate valve of size 20mm dia including connection and testing complete all as specified and directed. |
45 | Supply and fixing in replacement gun metal gate valve of size 25mm dia including connection and testing complete all as specified and directed. |
46 | Supply and fixing in replacement gun metal gate valve of size 40mm dia including connection and testing complete all as specified and directed. |
47 | Supply and fixing in replacement gun metal globe or gate valve of size 50mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
48 | Supply and fixing in replacement gun metal globe or gate valve of size 80mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
49 | Supply and fixing in replacement PPR gate valve (brass insert) of size 20 mm dia including connection and testing complete all as specified and directed. |
50 | Supply and fixing in replacement PPR gate valve (brass insert) of size 25 mm dia including connection and testing complete all as specified and directed. |
51 | Supply and fixing in replacement PPR gate valve (brass insert) of size 32 mm dia including connection and testing complete all as specified and directed. |
52 | Supply and fixing in replacement PPR gate valve (brass insert) of size 50 mm dia including connection and testing complete all as specified and directed. |
53 | Supply and fixing in replacement PPR gate valve (brass insert) of size 100 mm dia including connection and testing complete all as specified and directed. |
54 | Supply and fixing in replacement bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
55 | Supply and fixing in replacement plug type PVC bib tap 15mm bore size, screwed for iron pipe and fixed complete all as specified and directed. |
56 | Lagging on pipe of internal dia 15 mm, used in external water supply or plumbing all round with 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842, provided with chicken mesh wire netting 25 gauge, 20mm mesh and finally covering with plaster of paris including taking down old, complete all as specified and directed. |
57 | Description all as per item No. 24.00but on 20 mm bore pipe -ditto- |
58 | Description all as per item No. 24.00but on 25 mm bore pipe -ditto- |
59 | Description all as per item No. 24.00but on 40mm bore pipe -ditto- |
60 | Description all as per item No. 24.00but using 40mm thick bonded mineral wool and on 50mm bore pipe -ditto- |
61 | Description all as per item No. 24.00but for 80mm bore GI/CI pipe with 40mm thick bonded mineral wool -ditto- |
62 | Description all as per item No. 24.00but for 100mm bore GI/CI pipe with 40mm thick bonded mineral wool -ditto- |
63 | Description all as per item No. 24.00but for 150mm bore GI/CI pipe with 40mm thick bonded mineral wool -ditto- |
64 | Taking up cast iron water main of size 80mm dia bore (including all fittings), with spigot and socket ends complete all as specified and directed. |
65 | Taking up cast iron water main of size 100mm dia bore (including all fittings), with spigot and socket ends complete all as specified and directed. |
66 | Taking up cast iron water main of size 150mm dia bore (including all fittings), with spigot and socket ends complete all as specified and directed. |
67 | Supply, fixing, jointing and testing cast iron pipe of size 80mm dia bore with spigot and socket ends, centrifugally cast, class LA, laid in trenches complete all as specified and directed. (Note : Excavation, earthwork & fittings shall be measured and paid seperately under respective items and joints and jointing material are deemed to be include in this unit rate item) |
68 | Supply, fixing, jointing and testing cast iron pipe of size 100mm dia bore with spigot and socket ends, centrifugally cast, class LA, laid in trenches complete all as specified and directed. (Note : Excavation, earthwork & fittings shall be measured and paid seperately under respective items and joints and jointing material are deemed to be include in this unit rate item) |
69 | Supply, fixing, jointing and testing cast iron pipe of size 150mm dia bore with spigot and socket ends, centrifugally cast, class LA, laid in trenches complete all as specified and directed. (Note : Excavation, earthwork & fittings shall be measured and paid seperately under respective items and joints and jointing material are deemed to be include in this unit rate item) |
70 | CI fittings like bend (any type radius and angle), taper any type (straight, bends, increasing, decreasingor double socket etc) Tee pieces single branch "Y" junction, double branch cross (all socket or socket and spigot) collars caps and plugs etc upto size 150mm bore of pipe complete all as specified and directed. |
71 | Repair/maint of water leakage from CI/DI pipe joint in ground and open carefully the joint portion of the pipe line after excavated the trench and burn out the defective run lead joint in existing CI pipe/fitting and provision of new lead joint at site using the retrieved lead as obtaining from burning out of joint and adding of fresh lead if required to make the joint 100% water leak proof including returning, filling and ramming the excavated material after satisfactory, joint/leak checking complete all as specified and directed for the following bore of CI pipe line :- |
72 | (a)150 mm bore pipe line. |
73 | (b)100 mm bore pipe line. |
74 | (c)80 mm bore pipe line. |
75 | Supply and fixing in replacement cast iron sluice valve (ISI marked) with both end flanged with iron wheel handle for clockwise closing brass spindle heavy duty PN-1.6 class. including gaskit joint nut, bolts & washers all as requirement of site complete all as specified and directed for the followingsize :- |
76 | (a) 80 mm bore |
77 | (b) 100 mm bore |
78 | (c) 150 mm bore |
79 | Material and labour for replacement of brass spindle for sluice valve (ISI marked) matching with existing make complete with collar neck nuts and all as per existing type of sluice valves for the following size complete all as specified and directed |
80 | (a)150 mm bore pipe line. |
81 | (b)100 mm bore pipe line. |
82 | Supply and fixing in rreplacement cast iron air release valve (ISI marked) with double orifice 80 mm dia suitable for installation upto 150 mm dia CI/DI pipe line incl nuts, bolts and gasket joint all as required, complete all as specified and directed |
83 | Supply and fixing in replacement cast iron non return valve (ISI marked) with gun metal seating single door type gaskit joints. Bolts/nuts etc , all as required for the following :- |
84 | i)150 mm bore pipe line. |
85 | ii) 100 mm bore pipe line. |
86 | iii)80 mm bore pipe line. |
87 | Relaying of serviceable CI water main pipe with spigot & socket ends retrieved from item No. 32 to 34 here-in before with joints and jointing material for the following size of pipes |
88 | (a) 80 mm bore |
89 | (b) 100 mm bore |
90 | (c) 150 mm bore |
91 | Supply and fixing in replacement Direct On Line starter for 3to 7.5 HP submersible pump, 3 Phase, 415 volts, complete all as specified and directed. |
92 | Supply & fixing in replacement off load change over switch4 pole, 200 Amp, 440 volts, complete all as specified and directed. |
93 | Supplying and laying synthetic Rubber insulated matt 10 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, suitable for electrical shock safety of size 2m x 1m complete all as specified and directed |
94 | Supply and fixing in repair single phase preventor 415V, complete all as specified and directed. |
95 | Supply and fixing in repair foot valve (ISI marked) flanged end drilled type including nuts, bolts and jointing materials complete all as specified and directed for the following sizes :- |
96 | (a) 150 mm dia |
97 | (b) 100 mm dia |
98 | (c) 80 mm dia |
99 | Supply & fixing in replacement fully Automatic Star Delta Starter suitable for 60 HP Centrifugal pump Sets 415 volt, 3 Phase, 50 Hz, including single phase Preventer complete all as specified and directed. MAKE-Siemens CAT PT NO-3TE0497-2A or equivelantto Havells /L&T |
100 | Cleaning of Overhead reservoir by draining out water below supply level, removing all internal sludge by washing. Cleaningthe surface of the reservoir using wire brushes and other scraping tools to remove dirt and scale to make it free from deposits, washing the reservoir with high pressure compressor nozzle thoroughly and removing dirty water from the tank to make it clean,disinfecting the surface using disinfectent complete all as specified and directed for 50000 gallons capacity (Note:- The work of cleaning and disinfection shall be carried out by qualified staff having experience in the field. The work shall be carried out in such a way that the water supply shall not be disrupted.) |
101 | Description all as per item No. 51.00 above but for 100000 gallons capacity - ditto- |
102 | Cleaning of underground/semi underground round/rectangular water sump by pumping out water below suction level, removing all internal deposited sludge by non clogging submersible pump, cleaning the surface of the sump using wire brushes and other scraping tools to remove dirt and scales to make it free from all deposits, washing the sump with high pressure compressor nozzle thoroughly and removing dirty water from the pump to make it clean including repair to the internal surfaces by plastering with cement mortar 1:3, 15mm thick and providing fillers at cracks to prevent any seepage of water including disinfecting the sump surfaces, complete, Painting one coat of anti bacteria water proof paint complete all as specified and directed of50000 gallons capacity.(Note:- The work of cleaning and disinfection shall be carried out by qualified staff having experience in the field. The work shall be carried out in such a way that the water supply shall not be disrupted.) |
103 | Description all as per item No. 53.00 above but for 100000 gallons capacity - ditto- |
104 | Description all as per item No. 53.00but for 200000 gallons capacity - ditto- |
105 | Description all as per item No. 53.00but for 25000 gallons capacity - ditto- |
106 | Supply only bleaching powder of superior quality with latest lot and test certificate from authorized laboratory with min 30% active chlorine (in 25 Kg bags) complete all as specified and directed. |
107 | Supply only granular chlorine (60% of chlorine conten) disinfectant superior quality for mixing with drinking water for water treatment, complete all as specified and directed. |
108 | Cutting cast iron pipes and reducing to required length before laying in position for insertion of new branch connections/tees for the bore of pipe upto 100 mmcomplete all as specified and directed. |
109 | Material and labour for overhauling of pump including replacement of worn out spares, like bearing, impellor, bushing etc and reusing of existing serviceable components after proper cleaning, machining all required and assembling, testing at workshop complete for 50/60 HP centrifugal /monoblock pump set including taking out complete motor pump assembly(certrifugal/mono block ) of any make and type from foundation of different water supply installation for necessary repair/overhauling of capacity 50/60 HP and transporting to outside workshop primer & transporting back to Pump House after assembling the motor with spray painting of two coat of synthetic enamel paint including installation, connection of electrical & water line & testing on load after proper alignment over the foundation to the entire satisfaction of Engineer - in - Chargecomplete all as specified and directed. NOTE :- (a)All new spares /components will be measured and paid separately under respective items. (b) Replacement of bolts /nuts/washers is deemed to be included in the items |
110 | Description all as per item No. 61.00 above but of pump 15/20/30 HP. |
111 | Material and labour for rewinding and overhauling of motor assembly after cutting burnt winding wire, cleaning of core slots and re- winding by using super enameled copper winding wire of appropriate gauge and turn as per existing incl providing all insulation materials & varnishing heating, replacement of worn out bearing bushing etc incl lubrication, and assembling the complete motor assembly, testing complete for following capacity motor complete all as specified and directedNOTE :- (a)All new spares/components will be measured and paid separately under respective items. (b) Replacement of bolts/nuts/washers are deemed to be included in the items. |
112 | (a). Motor of capacity 60 HP. |
113 | (b). Motor of capacity 50 HP. |
114 | (c). Motor of capacity 30 HP. |
115 | (d). Motor of capacity 20 HP. |
116 | (e). Motor of capacity 15 HP. |
117 | Description all as per item No. 62.00but except rewinding for 50/60 HP Motor -ditto- |
118 | Description all as per item No. 62.00but except rewinding for motor capacity 15/20/30 HP -ditto- |
119 | Replacement of the new following spare parts against item no 60.00 to 64 :- |
120 | (a) Gland Packing of any size |
121 | (b) Impeller for 60 HP Pump. |
122 | (c) Impeller for 50 HP Pump. |
123 | (d) Impeller for 30 HP Pump. |
124 | (e) Impeller for 20 HP Pump. |
125 | (f) Impeller for 15 HP Pump. |
126 | (g) Pump shaft with nut for 60 HP Pump. |
127 | (h) Pump shaft with nut for 50 HP Pump. |
128 | (i) Pump shaft with nut for 30 HP Pump. |
129 | (j) Pump shaft with nut for 20 HP Pump. |
130 | (k) Pump shaft with nut for 15 HP Pump. |
131 | (l) Bearing for 60 HP Pump |
132 | (m) Bearing for 50 HP Pump |
133 | (n) Bearing for 30 HP Pump |
134 | (o) Bearing for 20 HP Pump |
135 | (p) Bearing for 15 HP Pump |
136 | (q) Sleeve for P/Shaft for 60 HP Pump |
137 | (r) Sleeve for P/Shaft for 50 HP Pump |
138 | (s) Sleeve for P/Shaft for 30 HP Pump |
139 | (t) Sleeve for P/Shaft for 20 HP Pump |
140 | (u) Sleeve for P/Shaft for 15 HP Pump |
141 | (v) Tyre coupling set for 60 HP Pumping Set |
142 | (w) Tyre coupling set for 50 HP Pumping Set |
143 | (x) Tyre coupling set for 30 HP Pumping Set |
144 | (y) Tyre coupling set for 20 HP Pumping Set |
145 | (z) Tyre coupling set for 15 HP Pumping Set |
146 | (aa) DE/NDE Bearing for 60 HP Motor |
147 | (ab) DE/NDE Bearing for 50 HP Motor |
148 | (ac) DE/NDE Bearing for 30 HP Motor |
149 | (ad) DE/NDE Bearing for 20 HP Motor |
150 | (ae) DE/NDE Bearing for 15 HP Motor |
151 | (af) 6 Pole Terminal for 15 to 30 HP Motor |
152 | (ag) 6 Pole Terminal for 50/60 HP Motor |
153 | Material and labour for overhauling of Pump set incl cleaning, lubrication, machining, replacement of unserviceable components, refixing of existing serviceable spares & assembling complete for pumps of capacity up to 5.0 HP includingt taking out centrifugal Pump Set/Submersible monoblock pump set from different location, transporting to workshop for necessary repair/overhauling /servicing complete all as required and directed for pumpset of capacity upto 5.0 HP3 Phase or Single Phase of different make & type and transporting back to site after varnishing heating, reinsulation, fresh lubrication of bearings etc & assembling of complete motor & pump assembly incl spray painting with 2 coat of 1st quality synthetic enameled paint including connection of electrical & water line & testing complete all as directed for pump set of capacityupto 5.0 HP complete all as specified and directed. NOTE :- (a)All new spares/components will be measured and paid separately under respective items. (b) Replacement of bolts/nuts/washers is deemed to be included in the items. |
154 | Material and labour for rewinding and overhauling of Pump set after cutting burnt winding wire, cleaning of core slots and re-winding by using super enameled copper winding wire of appropriate gauge and turn as per existing incl providing all insulation materials & varnishing heating incl cleaning, lubrication, machining, replacement of unserviceable components, refixing of existing serviceable spares & assembling complete for pumps of capacity up to 5.0 HP complete all as specified and directed for the following capacity pump set. NOTE :- (a)All new spares/components will be measured and paid separately under respective items. (b) Replacement of bolts/nuts/washers is deemed to be included in the items. |
155 | Description all as per item No. 67.00 but Motor of capacity3.0/5.0 HP |
156 | Description all as per item No. 67.00 butMotor of capacity1.5/2.0 HP |
157 | Replacement of the following new spares against item no 66 to 69 :- |
158 | (a) Impeller for 1.5/2 HP Pump. |
159 | (b) Impeller for 3/5 HP Pump. |
160 | (c) Pump Shaft for 1.5/2HP Pump. |
161 | (d) Pump Shaft for 3/5 HP Pump. |
162 | (e) DE/NDE Bearing for 1.5/2 HP Motor |
163 | (f) DE/NDE Bearing for 3/5 HP Motor |
164 | (g) Motor Terminal for 1.5/2 HP Motor |
165 | (h) Motor Terminal for 3/5 HP Motor |
166 | Taking up Submersible Pump assembly including column pipe approx100 to 150 mtrs using chain pulley block manually and carrying out following phase of work all as directed for 5.0 to 7.5 HP Pump Set .(i) Transportation of submersible pump -motor assembly for necessary repair.(ii) Carrying out dismantling and overhauling of muitistage pump, incl cleaning and derusting of casing, replacement of worm out spare like bearings, impellar bushing, couplingetc & refixing of existing serviceable components after proper cleaning, machining all as required & assembling testing at workshop completeof anymake including carrying out painting by two coat of 1st quality synthetic enamelled paint over a coat of primer, assembling the pump and motor including testing complete all as specified and directed. NOTE :- (a)All new spares/components will be measured and paid separately under respective items.(b) Replacement of bolts/nuts/washers is deemed to be included in the items. |
167 | Material and labour for overhauling of pump motor assembly 3 phase, taking out burnt winding wire, rewinding using Water resistant PVC coated copper winding wire of appropriate gauge and turn,providing insulation materials and replacement of bearing and assembling with repaired/serviceable pump and testing complete all as directed by Engr-in Charge for 5.0 to 7.5HPsubmersible pump motorof anymake , including carrying out painting by two coat of synthetic enamelled paint over a coat of primer. NOTE :- (a)All new spares/components will be measured and paid separately under respective items. (b) Replacement of bolts/nuts/washers is deemed to be included in the items. |
168 | Replacement of the following new spares against item no 71 & 72 :- |
169 | (a) Brass impeller for 7.5 HP submersible pump |
170 | (a) Brass impeller for 5 HP submersible pump |
171 | (b) Stage casing bearing bush for 7.5 HP Submersible Pump |
172 | (b) Stage casing bearing bush for 5 HP Submersible Pump |
173 | (c) Shaft sleeve bush for 7.5 HP Submersible Pump |
174 | (c) Shaft sleeve bush for 5 HP Submersible Pump |
175 | (d) Suction bush for 5/7.5 HP Submersible Pump |
176 | (e) N.R.V for 5/7.5 HP Submersible Pump |
177 | (f) Stainless steel pump shaft for 7.5 Submersible Pump |
178 | (f) Stainless steel pump shaft for 5 Submersible Pump |
179 | (g) Pump shaft key for each stage for Submersible Pump |
180 | (h) Stainless steel stud with nut for Submersible Pump. |
181 | (j) Gun metal bush for 7.5 HP Submersible Motor. |
182 | (j) Gun metal bush for 5 HP Submersible Motor. |
183 | (k) Thrust bearing complete with carbon for 7.5 HP Submersible Motor. |
184 | (k) Thrust bearing complete with carbon for 5 HP Submersible Motor. |
185 | Material and labour for servicing/overhauling of Liquid Chlorinator plant of rating of feed pressure 3.5 to 5.5 Kg/ sq cm,5/6 LPH any make including replacement of worn out components,,PVC feed pipe, fixing clamps etc.assembling the complete complete chlorinating plant including testing all as directedby Eng -in Charge. (Note:All spare parts/gasket /screws/washersetc. to be replaced are deemed to be included in the item.) |
186 | Supply and fixing in replacement seamless column pipe heavy duty of 80 mm bore with thickness not less than 6 mm, 8 TPI thread of 10 feet long each pipe with both end threaded/flanged including joints complete all as specified and directed. |
187 | Description all as per item No 75 above but of 50/65mm bore. |
188 | Material and labour for lowering pump and motor including column pipe of any size in the existing bore well upto 100 to 150Mtr from ground level by chain pulley, reconnecting the column pipe to the existing rising main and all electrical connection and testing complete all as specified and directed. |
189 | Supply and laying in replacement submersible cable into bore hole/over the ground alongwith submersible pump/centrifugal pump sets, PVC insulated weather /water proof with flexible copper conductor 1100V grade of size 10 Sqmm 3 core including necessary jointing materials / kit and connecting with motor and starter terminals and testing complete all as specified and directed. |
190 | Description all as per item No 78 above but of size 6 Sqmm 3 Core -ditto- |
191 | Description all as per item No 78 above but of size 2.5 Sqmm 3 Core -ditto- |
192 | Supply and fixing in repair of the following items in the existing motor starter :- |
193 | (a)Contactor for 50/60 HP Motor Starter |
194 | (b) Contactor for 30 HP Motor Starter |
195 | (c) Contactor for 15/20 HP Motor Starter |
196 | (d) Relay for 50/60 HP Motor Starter |
197 | (e) Relay for 30 HP Motor Starter |
198 | (f) Relay for 15/20 HP Motor Starter |
199 | Annual maintenance/servicing and replacement of unserviceable consumable itemsof Reverse Osmosis water purifier of capacity 20/25/50 Ltrs/hrs installed at various location, required rectifying any type of blockage, loose connection in electric and electronic components of plants, servicing of the plant to be carried complete all as specified and directed. Note:- All the spares/components required for the repair and servicing shall be measured and paid separately here-in-after as supplied only. |
200 | Supply only newsediment filters 20 inch long against item no 199 above. Make- Kent/Aquafresh or as existing make. |
201 | Supply only newActivated carbon filters 20 inch long against item no 199 above. Make- Kent/Aquafresh or as existing make. |
202 | Supply only new Carbon block granule 20 Inch against item no 199 above.Make- Kent/Aquafresh or as existing make. |
203 | Supply only new RO membrane set against item no 199 above (open/Closed)Make- Kent/Aquafresh or as existing make . |
204 | Supply only new Solenoide Valve against item no 199 above .Make-; Make- Kent/Aquafresh or in equaivalent |
205 | Supply only for AC/DC Adopter 48 Volts ultera violet lamp . Make- Kent/Aquafresh or in equaivalent |
206 | Supply only new low pressure switch . Make- Kent/Aquafresh or as existing make. |
207 | Supply only new TDS valve .Make- Kent/Aquafresh or as existing make. |
208 | Supply only newBooster pump 150 SPD Make- Kent/Aquafresh or as existing make. |
209 | Annual maintenance/servicing and replacement of unserviceable consumable itemsof Reverse Osmosis water purifier of capacity 150Ltrs/hrs installed at various location, required rectifying any type of blockage, loose connection in electric and electronic components of plant, servicing of the plant to be carried complete all as specified and directed. Note-:(i )All the spares/components required for the repair and servicing shall be measured and paid separately here-in-after as supplied only. |
210 | Supply only newhydranautics membranes top quality . Make- : CMC/Filmtec or in equavalent |
211 | Supply only newlow pressure switch Make- Kent/Aquafresh or as existing make. |
212 | Supply only new tap of existing size and make as directed by engineer in charge |
213 | Supply only new for UV ballast and fuse Make- Kent/Aquafresh or as existing make. |
214 | Supply only new UV candle 15 inch long . Make- Kent/Aquafresh or as existing make. |
215 | Supply only new sediment filter 15 inch long (big blue) . Make- Kent/Aquafresh or as existing make. |
216 | Supply only new dosing chemical anti scalant as per recommended by indian ion company. |
217 | Supply only new roter meter . Make -:H2O or Equaivalent |
218 | Supply only new forrelay for automatic panel Make-: L&T/Legrand/HPL |
219 | Chemical cleaning by skilled person of indian ion company. |
220 | Rewinding of Booster pumps capacity 01 to 02 HP complete all as specified and directed. |
221 | Annual maintenance/servicing and replacement of unserviceable consumable itemsof Reverse Osmosis water purifier of capacity 600/1000Ltrs/hrs installed at various location, required rectifying any type of blockage, loose connection in electric and electronic components of plants, servicing of the plant to be carried as directed. Note-:(i )All the spares/components required for the repair and servicing shall be measured and paid separately here-in- after as supplied only. |
222 | Supply only new hydranautics membranes top quality Make- : CMC/Filmtec |
223 | Supply only new forlow pressure switch Make- Kent/Aquafresh or in equaivalent |
224 | Supply only new tap of existingsize and make as directed by engineer in charge |
225 | Supply only new UV ballast and fuse Make- Kent/Aquafresh or in equaivalent |
226 | Supply only new UV candle 20 inch long Make- Kent/Aquafresh or in equaivalent |
227 | Supply only new sediment filter 20 inch long (big blue) Make- Kent/Aquafresh or in equaivalent |
228 | Supply only new dosing chemical anti scalant as per recommended by indian ion company |
229 | Chemical cleaning by skilled person of indian ion company . |
230 | Supply only new for roter meter Make -: H2O or in Equaivalent. |
231 | Rewinding of Booster pumps capacity 03 HP . |
232 | Supply only newrelay for automatic panel a |
233 | Supply only PVC pipe 4mm bore with all fittings for 15/25/50/150Ltrs RO plantcomplete all as specified and directed. Make-: kent/Aquafresh or in equaivalent. |
234 | Supply only pre-bowltransparent type suitable for 15Ltr to 150Ltr RO plant. Make- Kent/Aquafresh or in equaivalent |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail