Tamil Nadu Urban Habitat Development Board-agecode007 has published Tender For Civil Works. Submission Date for this Tender is 13-02-2024. Supply of Motor Tenders in Chengalpattu Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing UNDER REAMED PILES RCC 25cm (10") dia of 358cm length and 350cm depth from G.L. cast in situ with single reamed bulbin cement concrete 1:1.5:3 including boring, erecting, vibrating, curing, hire charges for drilling equipments, etc, complete as per relevant ISI specifications (excluding costof steel reinforcement) For Compound Wall Only as directed by the departmental officer. |
| 2 | Earth work excavation for foundation with all leads and lifts in all soils and subsoils to the required depth as may be directed except hard rock requiring blasting inclusive of shoringstrutting and bailing out water wherever necessary refilliing the sides of foundation with excavated earth in layers of 15 cm thickness well consolidated depositing thesurplus earth in places shown and levelling the site with all intial leads and lifts etc complete complying with relevant standard specification.initial lift 0-2m as directed by the departmental officer. |
| 3 | Filing in foundation and basement with M-Sand in layers not exceeding 15 cms thick well watered rammed and consolidated complying with relevant standard specification including the cost of Supplying M-Sand etc., complete in all respects as directed by the departmental officers. |
| 4 | Cement concrete 1:4:8 (one of cement, four of M-sand and eight ofhard broken stone) using 40mmsize hard broken stone inclusive of shoring, strutting, bailing out water ramming curing etc complete as directed by the departmental officers. |
| 5 | Filling in foundation and basement with Quarry dust in landyers not exceeding 15 cms thick wel watered rammed and consolidated complying with relevant standard specification including the cost of supplying river M-Sand etc., complete in a respects as directed by the departmental officers. |
| 6 | Supplying and laying the Rubber Moulded Hydraulic Pressed machine made 6mm thick inter locking conrete paver block madeout of M20 grade concrete of approved design in colour over the bed of M-Sand including labour for laying, hand packing and complete in a respects as directed by the departmental officers. |
| 7 | Supplying fabricating and placing the following kinds of steel grills for reinforcement Fe 500D Grade steel reinforcement bars as per IS 786:1979 for all reinforced cement concrete works such as plinth beam, lintels, beams, sunshade, roof and floor slabs etc., including cost of steel and fabricating the reinforcement grills in position etc., complete in all respect as directed by the departmental officer ( In all floors) (The rate to include the cost of binding wire steel also, steel rods for all sizes) |
| 8 | Providing form work for centering, shuttering etc., for all reinforced concrete work such as plinth beam, raft beam, raft slab, grade beam etc., including strutting and shuttering wherever required using MS sheets of suitable size ofBG 10, stiffened with MS angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5 cm (Spaced about 91cm center to center) distance and supported by casurina props of size 10cm-13cm dia (spaced at 75 cm center to center) and removing the same after a specified period without damaging RCC works in all floors etc., completein all respects as directed by the departmental officer. (for column footing, Grade beam / Plinth beam) |
| 9 | Providing form work for centering, shuttering etc., for all reinforced concrete work like slab, beams, lintels, loftetc., including shuttering, upto3.00m high using MS sheet of size 90cm x 60cm and BG 10, stiffened with MS angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5 cm (Spaced about 91cm center to center) distance and supported by casurina props of size 10cm-13cm dia (spaced at 75 cm center to center) and removing the same after a specified period without damaging RCC works in all floors etc., completein all respects as directed by the departmental officer. (For Slabs, Lintels & Lofts) |
| 10 | Providing form work for centering, shuttering etc., for all reinforced concrete work like collum, window boxing etc., including shuttering, upto3.00m high using MS sheet of size 90cm x 60cm and BG 10, stiffened with MS angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joist of size 10 cm x 6.5 cm (spaced about 91cm centre to centre) distance and supported by casurina props of size 10cm to 13cm dia (spaced at 75cm centre to centre) and removing the same after a specified period without damaging RCC works in all floors etc completein all respects as directed by the departmental officer. (Sunshade/Window/Boxing / column) |
| 11 | Providing and laying in position, RMC M-25 Grade in accordance using 20mm with IS:456-2000, and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/m3 and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3"3 cu"m") 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu"m") 7670 kg" of M sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 12 | Brickwork in cement mortar 1:6 (One of cement and six of M-sand) using fly ash bricks of size 230mm X 110mm X 70mm in Ground floor including dewatering wherever necessary proper setting and curing etc. complete in all respects as directed by the departmental officer. |
| 13 | Plastering the walls with Cement Mortar 1:5 (One of cement and five of P-sand) 12mm thick including providing band cornice, curing, finishing, etc., complete in all respect as directed by the departmental officers. |
| 14 | Painting the walls with two coats of approved cement paint over one coat of primer including cost of lime,gum, brushes, scaffolding,and labour charges etc., complete in all respect as directed by the departmental officers. |
| 15 | Making and fixing M.S. Sheet gate of required size with two shutters using necessary M.S. flats 25x6 mm, M.S. Angles 50x50x6mm and M.S. Sheet 5mm thick (7guage) providing gun metal cap 75mm size pintols, latches 25cm size for locking arrangements, name boards (C.M). including cutting iron members, welding fixing gatein position, etc., complete as dicted during execution. (The design of gate furnishedis subject to alteration during execution) For main gate |
| 16 | Painting the new iron works with one coat of first class synthatic enamal paint of approved quality and colour including the costof paint brushes and scaffolding etc., complete as directed by the departmental officers. |
| 17 | Providing and laying SFRC cover slab etc., completed including labour charges etc as directed by the departmental officers. (Size of 600mm X 600mm) |
| 18 | Suplying and fixing UPVC (Un - Plasticized Polyvinyl Chloride ) Windows of casement type (open) from the profile the size of outer frame60mm x 58 mm and shutter profile are reinforcement with GI/ 1 mm 125 GSM and 100% corrosion free, the profiles are profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all edges of frame and shutter the shuttter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned .Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action ,security protective hinges ,strong locking systems and as per size for arresting noise and energy loss.The connecting mechanism netween sash and outer frame that enables opening of the window . The window should be fixed be fixed to the wall with 100% packing with screws and silicon packing all round the frames .The window should be got approved from the Executive Engineer before use on work. (pwd sr page.56, sl.no.191) |
| 19 | Supply and delivery of Open wellSubmersible pump set confirming to IS 14220/2002 and asamended thereafter and BEE 3 Star Rated capable ofdischarging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronzemixed type impeller , CIFG 200 gradecasing and brass screwsand rotor shall be of copper rod as per IS 613/1984with ISI mark. The pump suitable for installation in sump with 1.1 KV Grade 3 core suitable copper flat submersible cable to a lenghth of 15m with necessary cable joints. The non-return valve located at the top ofpump in the discharge outlet connection is tobe designed with minimum friction. The pumpshould be directly coupledto 2880 RPM , three phase , 50 Hz (+5),415 V+6% & 415 V -15% squirrel cage induction motorsuitablefor DOL upto 5 HP , Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP startingand for contious operation. TWAD SOR 2022-23 pg no. 107 (2500X40 Duty 1pmXm) |
| 20 | Supply and delivery of Three phase panel board Star -Delta starter confirming to IS 13947 and IEC60947-1 suitable KW rating for operationin AC/Three Phase /50 Hz (+/-)and 415 (+/- 10%) including 3 pole magnetic contactor with under voltage release -3 nos, CT operated Ammeter(65 mm dia)with supressed scale , Voltmeter(65mm dia ), Voltmeterselector switch , Miniature circuit breaker , Thermal Overloadrelay, Air Break contactorssuitablefor next Standard higher KW rating , Single phasing preventor , dry runningpreventor and ON/OFF Push button switches , wiring with 1 sq.mm/4 sq.mm copper pvc insulatedcable, powder coated vermin proof box , including the capcitor (the cost of capacitor is to betaken seperately) TWAD SOR 2022-23 pg no. 115- 20Hp motor. |
| 21 | Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O- Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 14846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 and with 5 years. 150mm Dia Valve |
| 22 | Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O- Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 14846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 and with 5 years. 300mm Dia Valve |
| 23 | Supply and delivery of Horizontal split casing centrifugal pump conforming to IS 1520 and as amended thereafter with CI casing and split glands, stainless steel shaft, hydraulically and dynamically balanced bronze impellers capable of discharging required quantity of water against a total head noted below due to all causes and with the accessories such as G.M air release cock, Grease cup, G.I priming funnel, M.S lifting hook, drip water G.I pipe connections, leading to the outside of pump house rubber water deflector, double flap foot valve, G.M strainer including unique tyre type coupling, common M.S fabricated base to mount pump and motor and other standard fittings etc complete. Pump shall be capable of discharging the specified quantity at the head noted at the minimum NPSH at site conditions. The shut off head shall be atleast 25% over and above the head at duty point. The pump shall be suitable for operation in AC three phase, 415 V, 50 Hz, 1500 RPM . |
| 24 | Supply and fixing of Vaccum pump price for 5 HP Model /RotaryType vaccum pumpsets (Pumpset +GIpipes +Fittings + Starters + Valves + 100 L Tank) including Transportation , handlingcharges as directed by the departmental officers At 30 Lakh sump |
| 25 | labour Chargesfor erection of Horizontalshaft,centrifugalpumpset(Coupled /Monoblock ) in bore well /Open well includingfixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves , preesuregauges upto the exterior wallof pump roomand erection of panel boardconsisting of TPIC switches starter, Volotmeter , Ammeter , Capacitorsingle phasing preventor and laying and jointing the cables and twin earthing as per IE rulesincluding providingbed blocks etc., complete and operating the pumps and trial run fordaysincluding signing of completion of reportsas requiredby EB authorities (TWAD SOR-2022-2023 PgNo.307) |
| 26 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 27 | Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the pipes and specials for pipe connection works including cutting, threading and fixing charges etc., (1000 litre) |
| 28 | Supplying and fixing of Oriya type Indian water closet 20" or 50cm size with "P" or "S" trap ( white glazed earthern ware of best approved) including concrete packing filling the portion with filling sand, flooring the same area with 7.5cm thick stone jelly lime concrete 32:12-1/2 ( Thirty two of broken stone jelly and twelve and half of lime) No sand using 20mm size stone jelly and plastering the surface with cement mortar 1:4 ( one of cement and four of sand) 12mm thick with anti-syphonage connection etc., complete in all respects. |
| 29 | Supplying and fixing of 110mm dia PVC SWR TYPE - B as per IS 13592 of approved quality for toilet linewith ISI Monogram packing the joints with solvent cement includingwith necessary wooden plugs and holding down clamps, dismantling and making good of the dismantled portion with necessary connection including testing etc., complete in all respects. |
| 30 | Supplying and fixing of following diaPVC pipes fitting/specials as per IS 4985/1988 of approved quality inluding cost of pipes and labour charges for fixing etc., all complete.20mm dia Coupler |
| 31 | 20mm dia elbow |
| 32 | 20mm dia tee |
| 33 | Supply, delivery and fixing of LED Outdoor Fittings (Light Emitting Diode)etc., complete as directed by the departmental officers. 150W LED Street light fitting (Higher end) |
| 34 | Supply, delivery and fixing of Service Connection AccessoriesL.T. 1100V PVC Aluminium armoured under ground cable with ISI Mark etc., complete as directed by the departmental officers.31/2 core 95 sq.mm PVC armoured UG Cable |
| 35 | Construction of chamber for100 mm to 250 mm dia sluice valve including providing and fixingFRC cover and frame of size 60cmx60cm for size 1.35mx1.2x1.55m (CMWSSB SoR 2022-23) |
| 36 | Construction of chamber for300mm to 400 mm dia sluice valve including providing and fixingFRC cover and frame of size 60cmx60cm for size 1.35mx1.35x1.95 m. (CMWSSB SoR 2022-23). |
| 37 | Dismantling the damaged weathering course and Pressedtileswithout causing any damages to the existing structure under repair and to the adjacent structure etc., complete in all respects as directed by the departmental officers. |
| 38 | Weathering course in concrete broken brick jelly 20mm size in pure slacked lime over RCC roof slab the proportion being 32:12 1/2 (Thirty two parts of broken brick jelly and twelve and half of slacked lime) laying to a thickness of 110mm and compacted and well beaten to 80mm by using wooden hand beater of weight not exceeding 2 kg hand beating sprinkling liberally with lime water and a small proportion of solution prepared by soaking kadukkai dry nut powder and jaggery (vellam) and giving required slope and thickness on roof etc. completed as directed by the departmental officers. |
| 39 | Finishing the top of roof slab with one course of pressed tiles 23cm x 23cm x 2cm using cement mortar 1:3 (One of cement and three of sand) mixed with water proofing compound at 2% by weight of the cement and pointing with the samemortar, finishing, curingetc., complete as directed by the departmental officers. |
| 40 | Added GST @ 18% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
