Balanc Work Upgradation & Maintenance Of Nauna - Byasi - Siltona - Budhalakote Motor Road Under P.M.G.S.Y.(Length - 8.450 Km.)
Tender Value
92.26 Lakhs
Estimated cost
Bid Submission
07 Feb 2024
0 days left
EMD
1.85 Lakhs
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
betalghat → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Balanc Work Upgradation & Maintenance Of Nauna - Byasi - Siltona - Budhalakote Motor Road Under P.M.G.S.Y. ( Length - 8.450 Km. )
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal ofstumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.(For Retaining Wall / Breast Wall) |
| 2 | Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction. (For Retaining Wall / Breast Wall) |
| 3 | Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 Random rubble masonryIn cement mortar (1:5) (For Retaining Wall / Breast Wall) |
| 4 | Hand Packed stone filling in back of wallls including cost of all materials, royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications) (For Retaining Wall / Breast Wall) |
| 5 | Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire (@ 32 Kg/ 10 Sqm) conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301. |
| 6 | Providing and fixing of C.C edge stones 12cm *12cm*60cm size precast in M15 cement concrete with 4 nos. 8 mm dia HYSDvertical bars and 3 nos 6mm diaMS barstirrups as per approved drawing including two coat white washingon valley side of formation as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. |
| 7 | Construction of parapetas per standard drawing including supply of all material, labour T&P etc. complete as per direction of engineer in charge. |
| 8 | Providing concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 (Nominal mix 1:3:6 ) |
| 9 | Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 Random rubble masonryIn cement mortar (1:5) |
| 10 | Providing concrete for plain concrete in substructure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203P.C.C. grade M 20 (Nominal mix 1:2:4 ) |
| 11 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204. |
| 12 | White washing of parapet walls of CD work and tree truncks White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915. |
| 13 | Construction of Hill side pucca KC drain |
| 14 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal ofstumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. |
| 15 | Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 Random rubble masonryIn cement mortar (1:5). |
| 16 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204. |
| 17 | Construction of Cause Way |
| 18 | Excavation in foundation in soil in hill area by mechanical means includingcuttiong and trimming of side slopeand disposal ofexcavated earth lift up to 1.50 mt lead up to 20mt as per tech spec. no -1603.2 |
| 19 | Providing concrete for plain/reinforced concrete M10 in open foundations Nominal mix 1:3.6complete as per drawings and technical specifications Clause802, 803, 1202 & 1203 |
| 20 | Providing concrete for plain concrete in substructure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203P.C.C. grade M 25 (Nominal mix 1:1.5:3) |
| 21 | Supply , fitting and placing HYSD bar reinforcement ( fe 415) in substructure complete as per drawingand tech. Spec, clause 1002,1010,1202 ( ref 13.2-1000) |
| 22 | Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire (@ 32 Kg/ 10 Sqm) conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301 |
| 23 | Construction of embankment with Material Obtained from Roadway Cutting Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5(For Making super elevation and patri filling) |
| 24 | Construction of coolie walling including supply of all material, labour, T&P etc. required for proper completion of the work as per direction of Engineering- charge. (As per PWD Uttarakhand specifications) |
| 25 | WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. By Mechanical Means |
| 26 | Providing and applying primer coat with Bitumen emulsion (SS-1) complying with IS: 8887 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.00 kg/sqm using mechanical means as per Technical Specification Clause 502, Low Porosity |
| 27 | Providing and applying tack coat with Bitumen emulsion (Rapid setting RS-1 grade complying with IS: 8887) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 28 | 20mm Open graded PC (using shredded waste plastic material )Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using VG-30 bitumen and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades as per Technical Specification Clause 508. Using Bitumen VG-30 @ 1.34 Kg/Sqm and shredded waste plastic material @ 0.120 Kg/Sqm as per direction of Engineer-in-Charge. |
| 29 | Providing and laying seal coat by Bituminous Emulsion SS-2 as binder for sealing the voids in a bituminous surface laid to the specified levels grade and cross fall using Type B as per Technical Specification Clause 508. |
| 30 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will bewelded to 2 nos 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1. |
| 31 | Semi Reflective Traffic Signs Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 (600 mm equilateral triangle) |
| 32 | Kilometre Stone Reinforced cement concrete M15 grade kilometre stone/local stone of standarddesign as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 |
| 33 | 5th Kilometre Stone (precast) |
| 34 | Ordinary Kilometer Stone (Precast) |
| 35 | 200 m stone (precast) |
| 36 | The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains as per technical specification Clause 1907. |
| 37 | Maintainance Activities: |
| 38 | Emergency Maintenance |
| 39 | Major Slip Clearance in all Type of Soil ,rock and boulders including cost of all material , machine,T&p etc required for proper compeletion of work as per mord specification of work 1611. |
| 40 | Ist Year |
| 41 | IInd Year |
| 42 | IIIrd Year |
| 43 | Ivth Year |
| 44 | Vth Year |
| 45 | Deploying Hydraulic excavator of 0.90cum bucket for clearence of Major slip in all type of soil rock and boulders including its operator ,pol, andall other charges required for proper compeletion of work. |
| 46 | Ist Year |
| 47 | IInd Year |
| 48 | IIIrd Year |
| 49 | Ivth Year |
| 50 | Vth Year |
| 51 | Providing and laying of boulder apron laid in wire crate with 4 mm dia GI wireconforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and techniacal specification 1301 |
| 52 | Ist Year |
| 53 | IInd Year |
| 54 | IIIrd Year |
| 55 | Ivth Year |
| 56 | Vth Year |
| 57 | Coolie Walling including supply of all material, labour, T&P,royalty etc. required for proper completion of the work,as directed by Engineer-in-charge and as per PWD specifications 8.90 (For opening communication only) |
| 58 | Ist Year |
| 59 | IInd Year |
| 60 | IIIrd Year |
| 61 | Ivth Year |
| 62 | Vth Year |
| 63 | Routine Maintenance- Under PBMC |
| 64 | Maintenance under PBMC for 1] Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914. 2] Maintenance of road side Drains includingminor slip clearence , reshaping ,deepening and ,regrading ,as well ascatch water drains as per technical specification Clause 1907.3]Maintenance of shoulders to the required level by filling/cutting the soil and its compacting including disposal of the surplus materialin approved muck disposal points as per specification clause 1903.4] Maintenance of scuppers &Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1908.5] Maintenance of Causeway by way of minor Surface repairs, replacing Guide Posts, repair of flood gauges, removal of debris, providing boulders and protection work and painting as per technical specification Clause 1909. 6] Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings and technical specification Clause 1910.7] Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912.8} Repairing of potholes by removal ofloose material, trimming ofsids, cleaning of surface and providing tack coat bitumen imulsion and patch repair with 20 mm thick premix carpeting and Type B seal coatusing bitumen or catonic bitumen imulsion(in 3rd and 5th year).9] Two coatwhite washing onparapet walls of CD work ,edge stones, tree truncks, and prominent rock patches on hill sides including preparation of surface by cleaning scraping etc. as per technical specifications Clause 191. |
| 65 | Ist Year |
| 66 | IInd Year |
| 67 | IIIrd Year |
| 68 | Ivth Year |
| 69 | Vth Year |
AI Tender Summary
Tender Timeline
Jan 27, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 07, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 07, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender