Tender For Construction Of Community Hall In Asansingha Village Under Bramhandih Panchayat.
Tender Value
5.97 Lakhs
Estimated cost
Bid Submission
05 Feb 2024
0 days left
EMD
12000
Bank guarantee accepted
Document Fee
1250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
topchanchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Hall In Asansingha Village Under Bramhandih Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M including all lifts levelling ramming the foundation trenches removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | Extra for earthwork in hard soil as per. Specification and direction of E/I (Vide classification of Soil item _B) |
| 3 | Filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 4 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per buy lading specification and direction of E/I (Mode of measurement compacted volume). |
| 5 | Providing designation 75B one Brick flat soling as per building specification and direction of E/I |
| 6 | Providing P.C.C M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 excluding screening shutteringmixing cement concrete in mixer and placing in position, vibrating, striking, curing taxes and royalty all complete as per building specification and direction of E/I |
| 7 | Providing R.C.C M-200 with nominal mix of (1:1.5:3) incolumn and plinth with approved quality of Stone as per building specification and direction of E/I |
| 8 | Centering and Shutering including strutting propping etc.and remove all Foundation, Footing bases of Column etc for mass concrete. |
| 9 | Centering and Shutering including strutting propping etc.and remove all Column, pillers, piersand abutment. etc |
| 10 | Centering and Shutering including strutting propping etc.and remove all Lintels, Beams, Plinth Beam and Girders etc |
| 11 | Centering and Shutering including strutting propping etc.and remove all Suspended floors roofs landing balconies and access platform |
| 12 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\"x4.5\"x3\") in C.M. (1:6) in Foundation and Plinth with approved uality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 13 | Providing 50mm thick damp proof course with cement concrete M-15with nominal mix of (1:2:4) with approved as per building specification and direction of E/I |
| 14 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\"x4.5\"x3\") in C.M. (1:6) in Superstructure with approved uality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 15 | Providing and fixing fan hook of 16mm dia M.S bar 1 metre long bent to required size and shape placed in position and fixed in R.C.C slab/beam at the time of casting all complete as per building specification and direction of E/I |
| 16 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including as per building specification and direction of E/I |
| 17 | Providing tor steel reinforcement of 10mm, 12mm as per approved deign and drawing as per building specification and direction of E/I. (a) 10mm (TMT coil Fe 500) (only valid for TATA(Tucson), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL), (b) 12mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) |
| 18 | Providing 12mm thick cement plaster (1:6) as per building specification and direction of E/I |
| 19 | Providing 6mm. Thick cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 as per building specification and direction of E/I |
| 20 | Supplying fitting and fixing M.S grill made of 20x60mm M.S. flat as per approved design and drawing properly fabricated with joints continuous fillet welded and finished smooth carriage of grill to work site hoisting as per building specification and direction of E/I |
| 21 | Supplying fitting and fixing 20 gauge G.C.I. Sheet gate fitted on M.S. Angle frame of size 60x60x6mm. Including cost of fabrication providing necessary locking arrangement with Haskell and downy duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction E/I. |
| 22 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface all complete as per building specification and direction of E/I. |
| 23 | Providing two coatsnowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper. Scaffolding, curing and taxes all complete as pr building specification and direction of E/I |
| 24 | Providing 50mm thick first class patent stone flooring (1:2:4) with stone chips in two layers bottom layer 19mm thick (1:2:4) with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thick (1:2) with 6mm down stone chips. In panels including cost of curing finishing the surface smooth by rubbing with carborndum stone direction of E/I. |
| 25 | Add Carriage of Material Sand (Lead 17 Km.(P)) |
| 26 | Brick (Lead 16 Km.(P)) |
| 27 | Stone Chips(Lead 15 Km.(P)) |
| 28 | Cement + rod(Lead 10 Km.(P)) |
| 29 | Sign Board and Photograph |
| 30 | Goods & Service Tax (G.S.T. 18%) |
| 31 | 1% Labour Cess |
AI Tender Summary
Tender Timeline
Jan 27, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 05, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 07, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender