|
| 1 | PART-A (OPERATION / RUNNING / PREVENTIVE MAINTENANCE WORKS) |
| 2 | Operation and Running / Preventive maintenance jobs of complete lighting system, cleaning and installation of ceiling fans both indoor and outdoor in various building of BTPS area except Switch Yard, Transformer Yard, Main Power House Building, Control Rooms, Boiler,Ash Handling Plant, Coal Handling Plant, The work includes maintenance of normal and emergency AC/DC lighting circuit, welding points, ceiling fans/Air coolers points, Tube lights fittings street lights, area lights and associated fittings, light distribution and branch boards at Service Building, WTP, SWP House, Simulator Building, BTPS Stores, CA Lab, Canteen No. 1&2, & LT&HT Switchgear, Heavy Vehicle base, CW Pump House including Street Lights of BTPS, Anpara.as per scope of work 1.1 |
| 3 | Daily checking, recording of current, voltage and other important parameters, resetting the alarm, checking and replacement of panel cooling fan and other components, if required, along with other routine maintenance work of complete UPS System of Unit No 4&5 as per scope of work 1.2 |
| 4 | Daily checking of panels, windows, replacement of indicating lamps & modules and attending minor faults with the available spares of complete Annunciation System of Unit No 4&5 as per scope of work 1.3 |
| 5 | Upkeeping and Maintenance of equipment’s in C&I and Electronics labs and assist in checking / calibration/ testing of field and electronics instruments as per scope of work 1.4 |
| 6 | Daily Routine checking, maintenance and attending minor faults with the available spares of MW &frequency display unit and digital clock at various associated locations in BTPS / MCB and CGM Office as per scope of work 1.5 |
| 7 | Maintenance support services work on control panel equipment\"s and modules of various C&I systems (APC, BMS, BSQ, MFT etc.) installed for boiler side System, Ash Handling control System and Ash Water Pump House Control System of 2x500 MW Anpara BTPS. as per scope of work 2.1. |
| 8 | Daily Routine checking, preventive maintenance of mill level system in both unit 2x500 MW BTPS Anpara as per scope of work |
| 9 | 1.2 Operation and Running / Preventive maintenance jobs of complete fan and lighting system |
| 10 | Rewinding of Burnt Fan Coils |
| 11 | Overhauling of ceiling fans. |
| 12 | Supply and Replacement of Condenser |
| 13 | Supply and Replacement of ceiling fan bearings |
| 14 | Supply and Replacement of Call Bell (Buzzer type), |
| 15 | Supply and Replacement of Call Bell (Ding- Dong type) |
| 16 | Supply of 32 Amp ISI standard Switch-fuse Unit |
| 17 | Supply and replacement of 1.5mm2 single core cable for lighting. (Red & Black) |
| 18 | Supply and replacement of 5 Amp Switch of ISI standard |
| 19 | Supply and replacement of 5 Amp Socket of ISI standard |
| 20 | Supply and replacement of 15 Amp Switch of ISI standard |
| 21 | Supply and replacement of 15 Amp Socket of ISI standard |
| 22 | Supply and Installation of 15 Amp Switch & Socket board on 4”x8” |
| 23 | Supply and Installation of multipoint 5 Amp and 15 Amp Switch & Socket board on 8”x10” |
| 24 | Installation of new tube light fixture along with associated cabling. |
| 25 | 2.2 Rewinding of electrical motors installed in Boiler C&I systems of 2x500 MW Anpara BTPS |
| 26 | Below 1 KW |
| 27 | 1KW to below 2 KW |
| 28 | 2 KW to below 3 KW |
| 29 | 3 KW to below 5 KW |
| 30 | 5 KW to below 7 KW |
| 31 | 7 KW to below 10 KW |
| 32 | 10 KW to below 20 KW |
| 33 | 20 KW to 30 KW |
| 34 | Repairing of Bearing Housing of rotary feeder motor |
| 35 | 2.3 Repairing / restoration of impulse lines of Delta P Level Measurement system of mills |
| 36 | Repairing / restoration of impulse lines of Delta P Level Measurement system of mills |
