Establishment Of Sports Life Fitness Centre At Olavanna Kozhikode- Installation Of Gym Equipments-Procurement Of Furniture, Branding And Associated Works- 1 Branding And Associated Work 2 25.7 : Designing, Fabricating, Testing, Installing And Fixing In Position Curtain Wall With Aluminium Composite Panel Cladding, With Open Grooves For Linear As Well As Curvilinear Portions Of The Building , For All Heights And All Levels Etc. Including: A ) Structural Analysis & Design And Preparation Of Shop Drawings For Pressure Equalisation Or Rain Screen Principle As Required, Proper Drainage Of Water To Make It Watertight Including Checking Of All The Structural And Functional Design. B ) Providing, Fabricating And Supplying And Fixing Panels Of Aluminium Composite Panel Cladding In Pan Shape In Metalic Colour Of Approved Shades Made Out Of 4Mm Thick Aluminium Composite Panel Material Consisting Of 3Mm Thick Fr Grade Mineral Core Sandwiched Between Two Alumini Um Sheets ( Each0.5Mm Thick ) . The Aluminium Composite Panel Cladding Sheet Shall Be Coil Coated, With Kynar 500Based Pvdf / Lumiflon Based Fluoropolymer Resin Coating Of Approved Colour And Shade On Face # 1 And Polymer ( Service ) Coating On Face # 2 As Specified Using Stainless Steel Screws, Nuts, Bolts, Washers, Cleats, Weather Silicone Sealant, Backer Rods Etc. C ) The Fastening Brackets Of Aluminium Alloy 6005 T5 / Ms With Hot Dip Galvanised With Serrations And Serrated Washers To Arrest The Wind Load Movement, Fasteners, Ss 316 Pins And Anchor Bolts Of Approved Make In Ss 316, Nylon Separators To Prevent Bi-Metallic Contacts All Complete Required To Perform As Per Specification And Drawing The Item Includes Cost Of All Material & Labour Component, The Cost Of All Mock Ups At Site, Cost Of All Samples Of The Individual Components For Testing In An Approved Laboratory, Field Tests On The Assembled Working Curtain Wall With Aluminium Composite Panel Cladding, Cleaning And Protection Of The Curtain Wall With Aluminium Composite Panel Cladding Till The Handing Over Of The Building For Occupation. Base Frame Work For Acp Cladding Is Payable Under The Relevant Aluminium Item.S The Contractor Shall Provide Curtain Wall With Aluminium Composite Panel Cladding, Having All The Performance Characteristics All Complete , As Per The Architectural Drawings, As Per Item Description, As Specified, As Per The Approved Shop Drawings And As Directed By The Engineer-In-Charge. However, For The Purpose Of Payment, Only The Actual Area On The External Face Of The Curtain Wall With Aluminum Composite Panel Cladding ( Including Width Of Groove ) Shall Be Measured In Sqm. Up To Two Decimal Places. 3 Od297952 / 2023_2024 : Design, Fabrication And Errection Of Acrylic Box Letters Of 6Mm And Led Lighting Fixed Over Existing Acp Name Board. The Design, Pattern, Font And Size Should Be As Per The Engineer In Charge Of The Work. The Cost Is Inclusive Of Transportation, Loading , Fixing Etc 4 Od297954 / 2023_2024 : Design, Supply And Installation Of High Definition Vinyl Printing With 3Mm Foam Sheet Base Fixed On Wall Using Suitable Adhesive. The Print Installed At Site Shall Be Latex Print With 3 Year Guarantee For Color And Shall Not Fade. The Surface Shall Be Cleaned With Suitable Foam And Dried Before Installing Foam Sheet. The Sticking Should Be In Proper Methods Avoiding Bubbles, Bents Etc.The Design, Color And Font Used For The Print Installed At Site Shall Be Pre-Approved By The Engineer In Charge Of The Work. The Cost Include All Sorts Of Design, Sacffolding, Labor Etc 5 9.6.1 : Providing And Fixing 35 Mm Thick Factory Made Laminated Veneer Lumber Door Shutter Conforming To Is: 14616 And Tads 15:2001 ( Part B ) , Including Isi Marked M.S.Pressed Butt Hinges Bright Finished Of Required Size With Necessery Screws, All Complete As Per Directions Of Engineer-In-Charge And Panelling With Panels Of:12 Mm Thick Plain Grade- 1, Medium Density Flat Pressed Three Layer Particle Board Fpt- I Or Graded Wood Particle Board Fpt-I, Is: 3087 Marked, Bonded With Bwp Type Synthetic Resin Adhesive As Per Is: 848: 6 21.8.1 : Upto 5 Mm Depth And 5 Mm Width 7 100.98.1008 : Engaging Coolie 8 Supply Of Furniture 9 Od297949 / 2023_2024 : Supply Of Office Cum Reception Table Of Size 1230 X 620 X 750 Mm Made Of Particle Pressed Wood Of 18Mm Thickness. The Table Should Have 2 Drawers Of Size 350 X 320 X 150 Mm And 2 Compartments Of Size 350 X 320 X 540 Mm. The Table Should Have One Drawer And One Storage Compartment On Either Sides. The Drawers And Compartments Should Have Lock With 2 Keys Each. The Table Should Also Have A Leg Rest Of Size 450 X 150 X 18 Mm. 10 Od297951 / 2023_2024 : Supply Of Office Cum Computer Table Of Size 800X480x760 Mm Made Of Rubber Wood ( Rubwood ) . The Table Should Have Additional Platform Form Processing Unit, Printer And Folders At The Base. The Table Should Also Have Drawer Type Keyboard Platform At Required Height. The Item Shall Be Supplied At Site As Per The Instructions Of The Engineer-In-Charge. 11 Od298998 / 2023_2024 : Supply Semi Executive Table Of Size 1020X760x760 Mm Made Of Solid Treated Rubber Wood Of Superior Quality Including All The Fittings. The Table Should Have A Drawer Of Size 400X150x510 Mm With Handle And Lock And Should Have A Keyboard Platform Of Size 750X450mm. The Colour Model And Design Of The Item Shall Be Approved Prior To Supply By The Engineer - In - Charge. 12 Od297953 / 2023_2024 : Supply Of Foldable Type Massage Cot With Cushion. The Size Of The Cot Should Be 1800 X 750 X 400 Mm. The Leg Of The Cot Should Be Made Of Mild Steel 40Mm Round Pipe At Two Ends And Frame Of 32Mm Mild Steel Square Pipe. The Ms Pipe Should Nave One Coat Of Primer And Two Or More Coat Of Synthetic Enamel Paint. The Cushion Should Be 30Mm Thick With Hard Bottom. 13 Od297955 / 2023_2024 : Supply Of Armed Chair Made Of High Quality Fiber Of Height 800Mm. The Seat Area Should Be Of Size400 X 400Mm And The Back Rest Should Be 400 X 400 Mm. 14 Od297956 / 2023_2024 : Supply Of Solid Treated Rubber Wood Colonial Office Chair Of Size 470X440x900mm With Arm Rest. The Design, Colour And Model Of Chair Should Be Pre Approved By The Engineer-In-Charge Of The Work Before Supply. 15 100.98.1008 : Engaging Coolie
