Size To fit 1 Lflask Thermostatically controlledWatts- 300, Amp - 5
4
Heating Mantle
Size To fit 2 Litre flask Thermostatically controlledWatts- 300, Amp - 5
5
Heating Mantle
To fit round or flat bottomed flask capacity 500ml 6 set at a time a)individual built in solid state electric thermostatically control enable easy regulation of heater b)Three 12.7cm diameter enable support rods are included c)Round bottom flask capacity from 100 to 500ml at all 6 positions
6
Water bath
Ambient -5 to100 degreeWith thermostat and energy regulator, water level indicator.Double walled.Complete SS, 40x30x10mmWith 12 holes and concentric rings
7
Hot Plate
Rectangular Laboratory hot plate with Heavy SS top, with indicator lamps & Energy regulator, 30x45 cm
8
Bunsen Burner
Base Diameter- 3.25 in., Burner Plase Diameter- 1 in., Height- 5.7 in., Height with base- 7.25 in., material- Nickel with flame stabilizer to control flame temperature and length (three spoke base) for LPG gas. It should give non-luminous flame while in use.
9
Distill Water Plant
Unit should be made of thick stainless steel. Should be fitted with stainless steel condenser and iron brackets for wall mounting. Should be suitable for operation on 220 AC volt AC or DC. Output 02 lts. Per hour2KW.
10
Muffle Furnace
Temparature between 500 degree C to 10000 degreeC. It should be intermediately checked using a thermocouple provided with a sensor periodically. Diamension. 24 24 36 inches inner chamber. Digital display having temprature controlling device. Proper insulation with glass wool for intact support for the furnace protion
11
flash point apparatus
digital flash point apparatus a)Temp range up to 400 degree C b)Digital Display electronic temp controlled with an accuracy of deviation plus or ,minus5 degree Celiusc)It can be heated electrically or by gas also.d)Dual speed-Deluse model.e)With oil cup, lid, gas ignition device., f)Electric driven stirring device with dual speed 90-120 rpm and 250 rpm.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
