Tender For Repairs To C.D.Work On Shelgaon Atol Dodra Deulgaonmahi Road Odr 183 (With Hotmix) Ch 4/500 Tq. Deulgaon Raja Dist -Buldana
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Feb 2024
0 days left
EMD
13000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shelgaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To C.D.Work On Shelgaon Atol Dodra Deulgaonmahi Road Odr 183 (With Hotmix) Ch 4/500 Tq. Deulgaon Raja Dist -Buldana
BOQ
| Sl. No. | Item Description |
| 1 | Removal of existing 75mm thick cement concrete wearing coat including its disposal complete as per technical specification without causing any detrimental effect to any part of the bridge structure and removal of dismantled material with all lifts and lead up to 1000m etc. complete. |
| 2 | Dismantlingstonemasonryinlimeorcementmortarincludingstackingthematerilsas directed with all leads, lifts etc. |
| 3 | Excavation for foundationin earth, soils of all types, sand, gravel, soft murum including shoring andstruttingasnecessary and disposing off excavated stuff as directed etc. complete |
| 4 | Providing rubble filling of trap/ granite/ quartzite gneiss stones for foundations including filling voids with sand/grit and compaction etc complete |
| 5 | Providing selected hard murum filling including laying in layers of 15 to 20cmwith watering and compacting etc. complete. |
| 6 | Providing and laying in situ / ready mix / ready mix M10cement concrete of trap/ granite/ quartzite/gneissmetalinfoundationincludingnecessarycentering,formwork,bailingout water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand) |
| 7 | Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retainingwallsetc.includingnecessaryformwork,compaction,finishingandcuringetc. complete.(withreversibledrumtypemixer/concretebatchmixplant(panmixer) with SCADA |
| 8 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 1200mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 9 | Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing andfilling in joints with bitumenetc.complete.(withfullyautomaticmicroprocessorbasedPLCwithSCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 10 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages /symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, andlabour etc complete. |
| 11 | Supplying murum having PI<6 at the road side side, including conveying and stacking complete. |
| 12 | Spreading hard murum for side width etc. complete |
| 13 | Compacting the hard murum side widths including laying inlayers on each side with power roller including artificial watering |
| 14 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-10 bulk bitumen rates are considered to arrive at rates) |
| 15 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-10 bulk bitumen rates are considered to arrive at rates) |
| 16 | Providing and laying of Type - B premix seal coat with HMP of appropratecrushed stone chipping 6.70 mm size and penetration bitumen of specified grade @ 0.68 Kg / Sqm. , preparing existing road surface including mixing in suitable Batch Mixplant and rolling bystatic roller having weight 8 to 10 MT. etc. complete. (VG-10 bulk bitumen rates are considered to arrive at rates) |
| 17 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materialswith all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Mechanical Means |
| 18 | Providing earth work in embankment with approved materialsobtained from departmental land or other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with Power roller toachieve not less than 97 % of standard proctor density etc.complete |
| 19 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in aregular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. By Mechanical Means |
| 20 | Royalty charges for Sand |
| 21 | Royalty charges for murum & metal |
| 22 | Standares Consis tancy Fineness , Specific Gravity , Setting Time ( Initail & Final ) Compressive Strength, Soundness) |
| 23 | Compressive Strength of C.C. M-10 Cubes ( Set of Three Cubes) |
| 24 | Compressive Strength of C.C. M-20 Cubes ( Set of Three Cubes) |
| 25 | Fineness Modulus( sieve Analysis), Silt & Clay content |
AI Tender Summary
Tender Timeline
Jan 26, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 02, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 05, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender