Tender For Laying Of Ilp Road At Bharathi Nagar In Division-10,Unit-2A,Zone-1. => Limited
Tender Value
5.29 Lakhs
Estimated cost
Bid Submission
29 Jan 2024
0 days left
EMD
5290
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thiruvottiyur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Laying Of Ilp Road At Bharathi Nagar In Division-10,Unit-2A,Zone-1. => Limited
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain cement concrete work and clearing the debris etc. Complete |
| 2 | Earthwork Excavation And Deposting on Bank With Initial Lead of 10 m And Initial Lift of 2m In Hard Stiff Clay Stiff Black Hard Shales Muram Gravel Stoney Earth And Earth Mixed With Small Size Boulders And Hard Gravelly Soil (SS 20A) |
| 3 | Carting away the surplus earth and debris to a Corporation Land as directed during the execution |
| 4 | Providing and laying, spreading and compacting graded stone aggregates to Wet MixMacadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers withpavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals formachinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTHRev-5 (This Rate Is Applicable Only If Work Is Done During Night) |
| 5 | Supplying And Fixing Interlocking Blocks Against Available Edge Restraints 80 mm Thick of Approved Design And Pattern of Strength 40 N/Sq.m. 10 mm Iss Metal With MinimumCement Content As Applicable To M 40 Grade Concrete As Per Is-456-2000 Manufactures By Mechanical Or Hydraulic Machine Using Vibro-Compaction Process And Laid Over 50 mmThick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To-Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc.Complete(Cost Inclusive of Crushed Stone Sand (M Sand)). |
| 6 | Raising Or Lowering 45 cm.(or) 60 cm. Dia Cast Iron Man Hole Frames And Door Including Brick Work Second Class Table Boulded (Chamber Burnt) Brick of Size 9 X 4.3/8\"X2.3/4\" In cm. 1:3 With C.C 1:2:4 Using 20mm Irc Size B.G. Metal And Rendering Smooth The Top Surface With Cement Etc. Complete |
| 7 | Fixing C.C.Kerbs of Size 600X300X100 mm To Proper Level And Alignment Including Necessary Earthwork Pointing With cm.1:3 To Full Depth Curing Threadlining Etc. Complete(Excl. Cost of C.C. Kreb) |
| 8 | Supplying and Fixing of Digitally Printed Retroreflective Single Arrow Sign board of size 1595mm x 900mm made of Type XI grade cube corner micro prismatic grade sheeting confirming to IRC 67-2012 as per ASTMD-4956-09 Specifications, Digitally Printed using Latex Printer for Traffic Colour logos/text and laminated with UV Resistant clear electro-cut film and applied to proper prepared sign substrate made of 4mm thick Aluminum Composite Material (ACM) with 0.25mm aluminium skin thick on both sides and back support frame angle of 25mm x 25mmx3mm Supported by 32NB, 2.7mm Thick Stainless steel pipe all round in 304 grade and 2 nos. of vertical posts of 65NB, 3.04mm thick stainless steel pipe of 304 grade firmly fixed to the found by means of properly designed foundation of size 300 mm x 300 mm x 450 mm with M15 Grade cement concrete and the item shall include earthwork excavation, cost of materials, loading, unloading, lead, lift, transportation etc, complete as per approved template. The signs shall be manufactured using a system of matched components of reflective sheeting and overlay films and digital inks manufactured and supplied by the reflective sheeting manufacturer |
AI Tender Summary
Tender Timeline
Jan 25, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 29, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 30, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender