|
| 1 | BUILDING PORTION |
| 2 | Taking down cement or cement lime plaster, any description on stone/ PCC block/ brick wall or top of chajja including raking out joints, hacking for key, scrubbing down with water etc and removal of debris to outside of INS Mandovi area including filling of open joints in cement mortar 1:6 complete all as specified and directed. |
| 3 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M & L for dubbing out average 15 mm thick on irregular face of external and internal wall surfaces (when specifically ordered in writing) in CM 1:6 complete all as specified and as directed. |
| 5 | M & L for preparation of newly plastered wall surfaces, priming with alkali resistant priming paint, applying 1 mm thick wall care putty wherever required and distempering with two coats of distemper oil emulsion, white or tinted, complete all as specified and directed. |
| 6 | M & L for rendering 5 mm thick in cement mortar 1:3 on ceiling surfaces finished even & smooth, without using extra cement complete all as specified and directed. |
| 7 | M & L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed. |
| 8 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3, finished even and smooth without using extra cement with water proofing compound for sunken portions, complete all as specified and directed.Note : Quoted rate shall be deemed to be inclusive of rate for WPC |
| 9 | M & L for providing water proofing treatment on horizontal or vertical surfaces with provision of oil bound bitumen primer @ 0.20kg per sqm and applying a coat of blown grade hot bitumen 85/25 or 90/15 @ 1.20 kg/sqm and providing 4mm thk APP modified water proofing membrane weighing not less than 4 kg/sqm, reinforced with non woven polyester matt weighing not less than 160 gm/sqm as per manufacturer instructions complete all as specified and directed. |
| 10 | M & L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; copings, benching to manholes, kneelers, apex stones, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 11 | M & L for providing PCC 1:4:8type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete (sunken filling) complete all as specified and directed. |
| 12 | S & F aluminium alloy, anodised, sliding door bolt of 250 mm size, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 14 | M & L for rendering 10 mm thick onfair faces of brick work or concrete vertical surfaces in cement mortar 1:4 complete all as specified and directed. |
| 15 | M & L for providing 15mm thick screed bed or bedding layer of cement mortar 1:6for laying floor finishes complete all as specified and directed. |
| 16 | M & L for providing non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 17 | M & L for providing non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 18 | M & L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 19 | M & L for providing glazed ceramic coloured tiles in vertical surface, 300 x 200 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 20 | S & F PVC (SWR) pipes of 75 mm dia bore, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 21 | S & F PVC (SWR) pipes of 110 mm dia bore, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 22 | M & L for PVC (SWR) multi floor trap of 75 mm dia outlet, with grating including jointing with solvent cement, fixed in repairs, complete all as specified and directed. |
| 23 | S & F PVC (SWR) bends, any radius, 75 mm bore complete all as specified and directed. |
| 24 | S & F PVC (SWR) bends, any radius, 110 mm bore complete all as specified and directed. |
| 25 | S & F PVC (SWR) reducer, 110 mm bore complete all as specified and directed. |
| 26 | S & F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold, with long screwed shanks and fly-nuts, screwed for iron pipe of 15 mm dia bore complete all as specified and directed. |
| 27 | Demolition of reinforced brickwork in suspended slabs, beams, lintels etc. in cement concrete (reinforcement cut as required to facilitate demolition), complete all as specified and directed. |
| 28 | M & L for providing precast cement concrete block masonry with solid blocks, exc 10 cm in width, of PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and setting in CM 1:6 complete all as specified and directed. |
| 29 | M & L for providing concrete bed to drain pipes of 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 complete all as specified and directed. |
| 30 | S & F in repairs stop valves, cast copper alloy, concealed fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm dia bore complete all as specified and directed. |
| 31 | S & F in repairs PVC connections of size 15 mm, 450 mm long with PTMT nuts complete all as specified and directed. |
| 32 | Taking up or down steel tubing and connections of 15 mm dia bore complete all as specified and directed. |
| 33 | Taking up or down steel tubing and connections of 20 mm dia bore complete all as specified and directed. |
| 34 | Supplying and laying of CPVC pipe SDR 11 & plain CPVC SDR 11 fittings of 20 mm dia on walls/ ceiling or laying in floors complete all as specified and directed. |
| 35 | Supplying and laying of CPVC pipe SDR 11 & plain CPVC SDR 11 fittings of 25 mm dia on walls/ ceiling or laying in floors complete all as specified and directed. |
| 36 | M & L for providing 1 m x 500 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, including taking down old mirror complete all as specified and directed. |
| 37 | Taking down chowkats or frames not exceeding 1.5 sqm each complete all as specified and directed. |
| 38 | S & F powder coated aluminium anodised frame for doors, windows, ventilators and partitions with one or more rebates including joining cleats for fixing etc complete all as specified and directed. |
| 39 | S & F powder coated aluminium shutters for window/ ventilators, side hung type, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2 Nos), suitable handle (1 No) complete all as specified and directed. |
| 40 | M & L for providing 12 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work complete all as specified and directed. |
| 41 | S & F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples complete all as specified and directed. |
| 42 | S & F 4 mm thick sheet glass, ordinary quality, ground or obscured or frosted, on one side and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified and directed. |
| 43 | S & F door closer, hydraulically regulated, designation No. 3, universal type, aluminium (extruded section) body, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 44 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification complete all as specified and directed. |
| 45 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed. |
| 46 | S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 47 | S & F 2nd class hard wood, 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); and fitted to chowkats complete all as specified and directed. |
| 48 | S & F butt hinges of 100 mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 49 | S & F aluminium anodised, barrel tower bolts of extruded section, 200 mm long complete all as specified and directed. |
| 50 | S & F aluminium alloy, anodised, sliding door bolt of 300 mm size, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 51 | S & F aluminium handles of 125 mm size, cast type complete all as specified and directed. |
| 52 | S & F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)and including seat cover complete all as specified and directed. |
| 53 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 54 | S & F in repairs 2 in 1 health faucet with hook, chromium plated, 15 mm bore of pipe, with 1.5 m tube complete all as specified and directed. |
| 55 | S & F in repiairs wash basins, Vitreous China, flat back or angle back type, 550mm x 400mm size, including brackets and cutting for and pinning in ends of brackets or erecting stand and fixing of polyethylene of low or high density or PVC 32 mm dia waste pipe complete all as specified and directed. |
| 56 | S & F in repairs brass, tubular towel rail, chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 57 | S & F grating doom 125 mm dia with waste hole of PTMT complete all as specified and directed.(Minimum weight 40grms) |
| 58 | S & F in repairs bib tap, standard, of PTMT, any colour, high pressure, screwed for iron pipe of 20 mm dia bore complete all as specified and directed. (Note: Minimum weight 15mm-90gms/20mm- 125gms) |
| 59 | Cutting chases, pinning in, making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing, or concealed conduit wiring etc and making good, cutting not exc 10 cmgirth in brick walls complete all as specified and directed. |
| 60 | INTERNAL ELECTRIFICATION |
| 61 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc to match existing surface complete all as specified and directed. |
| 62 | M & L for point wiring complete with 1.5 Sqmm 1100 volts grade single core PVC insulated FRLS unsheathed cable with multistranded copper conductor confirming to IS-694, Part II, ISI marked, drawn through and including medium grade PVC conduit of size not less than 25mm dia, ISI marked with all accessories, concealed in wall/ ceiling, pressed steel terminal boxes firmly fixed with pipe /wall including concealed GI sheet metal box (rust protected), 3mm thick laminated hylem sheet or plastic masonite laminated sheet top cover fixed with chromium plated brass screws for fixing switches, sockets, regulators etc., and including providing 1.5 sqmm 1100 volts grade single core PVC insulated FRLS unsheathed cable with multistranded copper conductor in green colour as earth continuity conductor connected to common earth dolly for the following complete all as specified and directed.Note: Quoted rate shall be deemed to be inclusive of cutting chasis in wall/ floor/ ceiling and making good disturbed surface with PCC work and paint etc. |
| 63 | One ceiling/ exhaust fan point controlled by one switch |
| 64 | One switch socket combination 3 pin 5 Amp on independent board |
| 65 | One switch socket combination 3 pin 5 Amp on same board with other switches |
| 66 | M & L for point wiring complete with 2.5 Sqmm 1100 volts grade single core PVC insulated FRLS unsheathed cable with multistranded copper conductor confirming to IS-694, Part II, ISI marked, drawn through and including medium grade PVC conduit of size not less than 25mm dia, ISI marked with all accessories, concealed in wall/ ceiling, pressed steel terminal boxes firmly fixed with pipe /wall including concealed GI sheet metal box (rust protected), 3mm thick laminated hylem sheet or plastic masonite laminated sheet top cover fixed with chromium plated brass screws for fixing switches, sockets, regulators etc., and including providing 2.5 sqmm 1100 volts grade single core PVC insulated FRLS unsheathed cable with multistranded copper conductor in green colour as earth continuity conductor connected to common earth dolly for one 3 pin 15 Amps switch socket combination on independent board complete all as specified and directed.Note: Quoted rate shall be deemed to be inclusive of cutting chasis in wall/ floor/ ceiling and making good disturbed surface with PCC work and paint etc. |
| 67 | S & F modular switch 1 way 6A, 1 module, for 230V 50Hz AC supply complete all as specified and directed. |
| 68 | S & F modular switch 1 way 16A, 1 module, for 230V 50Hz AC supply complete all as specified and directed. |
| 69 | S & F modular socket 6A, 2/3 pin 2 module, for 230V 50Hz AC supply complete all as specified and directed. |
| 70 | S & F modular socket 6/16A, 2/3 pin 2 module, for 230V 50Hz AC supply complete all as specified and directed. |
| 71 | S & F in repairs LED tube light fitting 1 X 10 watt, 220V ACintegrated integral sleek extruded polycarbonate LED channel with white acrylic cover alonwith LED batten, including connecting with three core flexible copper conductor cable of suitable size from ceiling rose to fitting duly mounted on PVC blockwith steel screw & sleeves complete all as specified and directed. |
| 72 | S & F in repairs LED tube light fitting 1 X 20 watt, 220V ACintegrated integral sleek extruded polycarbonate LED channel with white acrylic cover alonwith LED batten, including connecting with three core flexible copper conductor cable of suitable size from ceiling rose to fitting duly mounted on PVC blockwith steel screw & sleeves complete all as specified and directed. |
| 73 | S & F wall mounting fan, 3 blade, 400mm sweep, white colour, 230 volts single phase oscillating complete all as specified and directed.Make :- Bajaj Model: Bajaj Esteem 400 mm Double String W/F or any other equivalent make as specified in List of Manufacturers |
| 74 | S & F ceiling rose, 2 to 3 terminal, surface bakelite, 65X50 mm, complete all as specified and directed. |
| 75 | S & F exhaust fan, 300 mm sweep single phase 230/240 volt AC supply 50 HZ, made of sturdy engineered plastic complete with louvers and shutters, fixed with suitable MS Bracket, nuts, bolts and fixing arrangement, including making/ resizing holes and PCC work as per site requirement complete all as specified and directed. |
