Military Engineer Services-MES has published Tender For Provision Of 03 Sheds At Arc And Of Solar Lights At Living Areas At 4N Det Rameswaram Under Ge Tirunelveli.. Submission Date for this Tender is 26-02-2024. Solar Light Tenders in rameswaram Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Feb-2024 | Corrigendum No.1 | BOQ | 14-02-2024 |
| 2 | 14-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-02-2024 |
| 3 | 21-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-02-2024 |
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc.n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil complete all as specified and as directed. |
| 2 | Material and labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation complete all as specified and as directed. |
| 3 | Material and labour for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ,for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 4 | All as item No.3 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and as directed. |
| 5 | Formwork to the sides of concrete foundation, bases of columns/ sides and soffits of foundation and plinth beams complete all as specified and as directed. |
| 6 | Material and labour for RCC with nominal mix 1:2:4 type B-1 using 20mm graded stone aggregate as in foundation & pedestal complete all as specified and as directed. |
| 7 | Supply and fixing Plates (plain or chequered) channels,squarecutor notched (ordinaryand countersunk) forming holes, without any attachment with Fe 410 -W (GdeE- 250) quality A complete all as specified and as directed. |
| 8 | Supply and fixing Mild steel screw bolts of 16 to 20mm dia(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,but length of bolt exc 5cm but n exc 10cm long complete all as specified and as directed. |
| 9 | Supply and fixing for rolled sections as in main and cross beam, hip and jack rafter purlins where connected to common rafter and running rails and guides for sliding door, fixed with angle cleats or other connecting plates etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed. |
| 10 | Supply and fixing Rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, hollow or flat sections) including distance pieces, cleats with Fe 410 -W (GdeE- 250) quality Aetc complete all as specified and as directed. |
| 11 | Material and labour for preparing new or previously untreated surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 12 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. |
| 13 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. |
| 14 | Material and labour Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m meanradius built in cement mortar 1:6 complete all as specified and as directed. |
| 15 | Material and labour Rendering 15mm thk cement plaster (1:4) on fair faces of concrete surfaces finished even smooth without using extra lime or cement complete all as specified and directed. |
| 16 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and as directed. |
| 17 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft soil complete all as specified and as directed. |
| 18 | Material and labour Hard core of gauge not exe 63mm deposited spread and levelled in layers not 15cm thk watered and rammed to a true surface complete all as specified and as directed. |
| 19 | Material and labour 100mm thk cement concrete typeB1 1:2:4 (20mm graded aggregate) complete all as specified and as directed. |
| 20 | Material and labour Sand cushioningunder floors or in foundationsincl watering and consolidation complete all as specified and as directed. |
| 21 | Material and labourMachine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed. |
| 22 | Material and labour Providing cement concrete type B1 1:2:4 using 20mm graded aggregate in copings, stones, bed plates & kerbs etc water trough and the like including weathering, slightly rounded or chamfered angles and throating all as specified and as directed. |
| 23 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms in soils all as specified and directed. |
| 24 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where complete all as specified and as directed. |
| 25 | Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in soft soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed. |
| 26 | Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including non-metallic rigid PVC conduit of 20 mm dia/ PVC Casing cappingalong with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof with and including 1.6 mm thick MS sheet fabricated terminal boxes flush mounted for mounting the switches, sockets, fan regulator etc as required with 3mm thick laminated hylum sheet top cover all as specified and directed for :- |
| 27 | (a) One light point controlled by one switch |
| 28 | Supply and fix in repairs switch piano flush type single pole one way 5 A 240 Volts complete all as specified and as directed. |
| 29 | Supply and fix in replacementceiling rose3 ways PVC / Polycarbonate, isolated body complete all as specified and as directed. |
| 30 | Material and labour for sub main wiring with two run single core 2.5 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 2.5 sq mm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 25 mm dia/PVC casing capping 25 mm including conduit accessories all as specified and directed. Note: Three runs of 2.5 Sqmm cable and one run of 25mm conduit / casing capping will be measured as one unit length. |
| 31 | Material and labour for sub main wiring in replacement with two run single core 4 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 4 sq mm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 25 mm dia/PVC casing capping 25 mm including conduit accessories all as specified and directed. Note: Three runs of 4 Sqmm cable and one run of 25mmconduit / casing capping will be measured as one unit length. |
| 32 | Supply and fix sheet metal enclosure powder coated double doorfor Distribution Board, SPN 4 way DBwith 200 A bus bar ,240 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections,complete all as specified and as directed. |
| 33 | Supply and fixMCB SP 6 A to 32 A, B curve, 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit completeall as specified and as directed. |
| 34 | Supply and fixMCB SPN 32 Amps, C curve 10 kAincluding , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit completeall as specified and as directed. |
| 35 | Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and directed |
| 36 | Supply and fixing LED light fitting 1x9W/1X10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 37 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed. Note: Earthwork,excavation and brick protection shall be measured and paid for seperately. |
| 38 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for laying cable and getting out in any type of soil, complete all as specified and directed. |
| 39 | Spreading of riddled earth obtained from trenchesfor cable cushioning on top and bottom of cable as specified. for cable protection complete all as specified and directed. (Note: Only punned thickness of riddled earth shall be measured) |
| 40 | Supply and laybricks in trenches , common burnt clay building bricks, subclass `B’ designation 75, old size ,with width equal to thelength of the brick; laid dry on edge vertically complete all as specified and directed. |
| 41 | Supply and fix in replacement energy saving LED building security light fittings, 35 W or nearest higher wattage, with in built electronic driver, IP65 class of protection with versatile pressure die cast aluminium housing parts, pure polyester powder coated dark grey housing, toughened glass cover with silicon gaskets and energy efficient LED including all accessories complete all as specified and directed. |
| 42 | Supply and fix in replacement PVC insulated two single core 2.5 sqmm FRLS copper conductor and one run of 2.5 sqmm multistranded copper conductor as earth continuity conductor drawn through andincluding 20 mm dia heavy duty non metallic rigidPVC conduitand accessoriescomplete all as specified and as directed. Note : (i)Two run 2.5Sqmm of single core, one run of 2.5 sqmm earth conductor and PVC conduit will be measured as one RM |
| 43 | Material and labour for replacement of GI bracket made out of 32mm dia GI pipe of length 1.50 m, bent to an angle of 30 degreeand fixed with 40x6mm flat iron including 02 sets of suitable clamps with nut, bolts and washers for fixing of light to pole complete all as specified and directed. |
| 44 | Demolition of Cement concrete (unreinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge. |
| 45 | Material and labour for 40mm bore `light grade` galvanised tubes with all fitting, laid in trenches complete all as specified and as directed by the Engineer-in-Charge |
| 46 | Supply and fix Solar Street Light FittingAll in One integrated with suitablemounting bracketsIP 65 LED solar streetlight with IK 08 protection and housing made of high grade CRCA. The other technical parameters are , Wattage : 14 W,Initial luminous flux (system flux) : 2000 lm ,Initial LED luminaries efficacy 140 lm/W ,Init. Corr. Color Temperature 5700 K with CRI > 70 , Battery type:Lithium Ferro Phosphate, Battery ampere hour : 12 Ah, Battery voltage :12.8 V, Battery charging & discharging cycles : 2000, Panel type:Mono crystalline, Panel peak wattage:30 W, Charge controller type: MPPT, Optical cover/lens type :Polycarbonate, Housing Material : Aluminum , Grid connection type :Off grid , Battery location:Inbuilt , Application conditions:Dimmable and configurablecomplete all as specified and directed . Make: PhilipsModel no: SmartBright All-in-one Solar Street Light , Cat. Part No. BRP111 LED20/757 Solar M or equivalent in Bajaj/Havells/Wipro Note : 1. Rate quoted shall be inclusive of any additional fittings/brackets required for fixing the all in one solar light in the existing pole . 2. Brackets should have an inclination of 135 degree between the two arms. |
| 47 | Material and labour for Cement concrete in foundations, 1:3:6 type C-2, using 40mm complete all as specified and as directed. |
| 48 | Supply and fix Tubular GI pole of 6 m height dia 63 mm dia and 2 mm thick for fixing all in one solar lights including painting of poles with two coats of red oxide primer and final coat of synthetic enamel paint complete all as specified and as directed. |
| 49 | SIGNATURE OF CONTRACTOR |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
