Repair And Maintenance Of Dtr Toewall And Plinth To 250 / 400 Kva T / F Under Edd Jaspur Under Edc Kashipur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Feb 2024
0 days left
EMD
51700
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jaspur → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maintenance Of Dtr Toewall And Plinth To 250 / 400 Kva T / F Under Edd Jaspur Under Edc Kashipur
BOQ
| Sl. No. | Item Description |
| 1 | Supply Item |
| 2 | Supply of wire mesh Fencing of size 50x35 mm around plinth and toe wall duly welded with frame of MS angle iron 35x35x6 mm and strip of size 35x6 mm in mid of each side along with wire mesh (width of wire mesh 1.5 meter) with the height of 0.5meter above the plinth 2meter above the toe wall with 01No gate and locking arrangement. |
| 3 | Supply of Aluminium Crimping Lug Size 400 sq mm made of best Quality Pore Line and Without Defeets ISI Standerd. (As per Specification of UPCL) |
| 4 | Supply of Aluminium Crimping Lug Size 240 sq mm made of best Quality Pore Line and Without Defeets ISI Standerd. (As per Specification of UPCL) |
| 5 | DTR Toewall/Plinth Maintenance Work |
| 6 | Cartage of the following material by private truck from store centre to work site dump store approx. distance 0 to 20 Km. including loading into truck and unloading at Dump store. |
| 7 | Other Small Line Material |
| 8 | Dismantling of Following Capacity DTR Transformer/Plinth Structure with the help of Chain Pulley/Crain Depending upon the nature of Job at work complete in all respect. |
| 9 | 250 KVA T/F |
| 10 | 400 KVA T/F |
| 11 | Construction of Transformer Plinth with size 2x2x1.1 meter above ground level and 0.6 mtr below level including the cost of material such as cement brick, ballast, sand etc complete work and tests as per standard complete in all respect. |
| 12 | Excavation of Earth for DTR Plinth |
| 13 | Cement Concreting work on DTR Plinth |
| 14 | Brick work in 1:4 Ratio DTR Plinth |
| 15 | Cement Plaster on DTR Plinth |
| 16 | Fixing of M.S. earthing rod 20×2500 mm for earthing of support as per RESPO drawing No. RES-12 including digging earth rod 0.3 m deep below ground level connected to support with earth wire 16 swg fixing of all accessories in all respect as per Specification of UPCL. |
| 17 | Fabrication of M.S. Channel 100x50 & M S Angle 65x65x6 mm Cutting and Holling in all respect as per Specification of UPCL. |
| 18 | Mounting and Installation of Following Capacity DTR Transformer/Plinth Structure with the help of Chain Pulley/Crain Depending upon the nature of Job at work complete in all respect and Energisation of Transformer. |
| 19 | 250 KVA T/F |
| 20 | 400 KVA T/F |
| 21 | Fixing of Wire mess Fencing of 250/400 KVA DTR Complete in all respect |
| 22 | Painting of 250/400 KVA DTR Structure complete in all respect |
| 23 | Laying of LT XLPE Cable complete in all respect. |
AI Tender Summary
Tender Timeline
Jan 23, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 06, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 06, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender