Tender For Construction Of Type Ii Quarter At Dongargaon In Nagbhid Range
Tender Value
21.30 Lakhs
Estimated cost
Bid Submission
29 Jan 2024
0 days left
EMD
21309
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dongargaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Type Ii Quarter At Dongargaon In Nagbhid Range
BOQ
| Sl. No. | Item Description |
| 1 | Removing grass, gazer grass and disposing off out of building premises including making clean the ground by shovel and phavaras etc. complete. |
| 2 | Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking and spreading as directed,dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering excluding shoring and strutting etc. complete. |
| 3 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and/or spreading as directed,dewatering manually, preparing the bed for the foundation and necessary back filling, ramming, watering (excluding shoring and strutting) etc. complete. |
| 4 | Providing soling using 80mm size trap metal in 15cm layer including filling voids with crushed sand/grit, ramming, watering etc. complete. |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzite/gneiss metal for foundation and bedding including bailing out water, plywood/steel formwork, laying/pumping, compacting, roughening themif special finish is to be provied, finishing if required and curing complete with fully automatic micro processor based PLC with SCADA enabled reversile Drum type mixer/ concrete Batch mix plant (Pan mixer) etc. complete with natural sand/V.S.I. quality |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap / granite/ quartzite / gneiss metal for R.C.C. work in foundations like raft, Strip foundations, grillages and footings of R.C.C.columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including centering, formwork. cover blocks. laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap /granite / quartzite/gneiss metal for R.C.C. columns as per detailed design and drawings or as directed, including centering, formwork, Cover blocks, laying/pumping. compaction finishing the formed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or /and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement &Structureal Steel) with fully automatic micro processor based PLC with SCADA enabled reversile drum type mixer/concrete batch mix plant (Pan mixer) etc. complete with natural sand/V.S.I. quality |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap / granite / quartzite/gneiss metal for R.C.C. beams and lintels as per detailed design and drawings or as directed including centering, formwork. cover blocks. laying/pumping, compaction roughening the surfaceif special finish is to be provided and curing etc. complete. (Excluding reinforcementand structural steel) with fully automatic micro processor based PLC with SCADA enabled reversile drum type mixer/concrete batch mix plant (Pan mixer) etc. complete with natural sand/V.S.I. quality |
| 9 | Providing fly ash Brick masonry with conventional I.S. type bricksin cement morter 1:6 in foundations and plinth including bailingout water mamually, striking joints racking out joints on watering and scaffolding etc. complete. |
| 10 | Filling in plinth and floors with Contractor Material/brought from outside and approved by Engineer incharge in layers of 15 cm. to 20 cm. including watering and compaction complete. |
| 11 | Providing and laying cast in situ/ready mix cement concrete in M 20 of trap/granite/ quartzite/gneiss metal for RCC coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if... etc. complete. |
| 12 | Providing and fixing M 40 grade thick bibrated pull cast or similar type concrete frame with chamfer conforming to LS 65241983 having 6 mm dia. Bars 3 Nos. and stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12mm dia bars 500mm long including primer and oil painting etc, complete. frame size 60mm x 100mm |
| 13 | Providing fly ash Brick masonry with conventional I.S. type bricksin cement morter 1:6 in Superstructure including striking joints racking out joints on watering and scaffolding etc. complete. |
| 14 | Providing fly ash Brick masonry with conventional I.S. type bricksin cement morter 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter/two hoop iron strips 25mm x 1.60 mm at every third course, properly bend and bounded at ends scaffolding raking out joints and watering etc. complete. |
| 15 | Providing & laying cast in situ/Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for plain or molded sills, cornice, jambs, block in course or architraves of required size and shapes including steel centering,formwork, laying/ pumping, compaction, roughening them if special finish is to be provided finishing uneven and honeycombed surface and during etc. complete. |
| 16 | Providing and fixing mild steel grill works for windows, ventilators etc. 20kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 17 | Providing and fixing mild steel grill railing 20kg/sqm with teak wood hand rail of size 75mm x 60mm and sill of 75mm x 25mm and newel posts for staircases, including fabricating, fixture, erecting, painting the grill work with one coat of anticorrosive paint and two coats of oil painting with approved dolour and polishing the sill, and rail and the newel post with french polish. |
| 18 | Providing & laying cast in situ/Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. Chajja per detailed design & drawings including centering, formwork, cover blocks compaction, curing, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) with fully automatic micro procesor based PLC with SCADA enabled reversile Drum type mixer/ concrete Batch mix plant (Pan mixer) etc. complete with natural sand/V.S.I. quality |
| 19 | Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete. |
| 20 | Providing and laying cast in situ/Ready Mix cement concrete in M-20of trap / granite /quartzite /gneiss metal for R.C.C slabs and landings as per detailed designs and drawing including centering, formwork. cover blocks. laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcementand structural steel) with fully automatic micro processor based PLC with SCADA enabled reversile drum type mixer/concrete batch mix plant (Pan mixer) etc. complete with natural sand/V.S.I. quality. complete. |
| 21 | Providing and laying cast in situ/Ready Mix cement concrete in M-20 of trap / granite / gneiss / quartzite metal for R.C.C. Pardi of required thicknessincluding centering, formwork, cover blocks, laying/pumping, compaction androughening them if special finish is to be provided and curing etc.complete.(Excluding reinforcement and structural steel) with fully automatic micro procesor based PLC with SCADA enabled reversile Drum type mixer/ concrete Batch mix plant (Pan mixer) etc. complete with natural sand/V.S.I. quality |
| 22 | Providing and fixing in position TMT - FE - 500 bar Reinforcement of various diameters for R.C.C. Pile caps, footings, foundations, slabs, beams and columns, canopies, staircase, newels, chajjas, linters, pardies, copings, fins, arches etc. as per detailed designs, drawings and scheduls including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete. |
| 23 | Providing and fixing on walls/ceiling/floor 15mm dia CPVC pipe with necessary fittings, remaking good he demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 24 | Providing and fixing on walls/ceiling/floor 25mm dia CPVC pipe with necessary fittings, remaking good he demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 25 | Providing and fixing H.D.P. container syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of alll tanks capacity between 200 to 1000 liters. |
| 26 | Providing and fixing 75mm dia stabiliser pipe/PVC soilvent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions slotted vent clamps etc. complete |
| 27 | Providing and fixing 100mm dia stabiliser pipe/PVC soilvent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions slotted vent clamps etc. complete |
| 28 | Providing and fixing PVC Rain water pipe of 110mm outer diameter and having wall thickness of 2.2 to 2.7mm confirming to IS 13595-1992 including proper rainwater receiving recess with PVC plug, bend necessary fittings such as offsets, shoes, including fixing the pipe on wall using approved wooden cleat projecting 25mm to 40mm from face of wall a fiing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement... etc. complete. |
| 29 | Providing and fixing 1st class white glazed earthenware orissa type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1) Cement concrete bedding 15 mm thick, 10 liter PVC flushing cistern with al |
| 30 | Providing and fixing white glazed earthenware wash hand basin of 55cm x 40cm size including cold water pillar tap/cold and hot water pillar tap trackets, rubber plugs and brass chain, stop tap and necessary pipe connections including PVC waste pipe and trap upto the sitside face of the wall. Making good the damaged surface, testing etc. complete. |
| 31 | Providing and fixing 10cm PVC nahani trap with grating etc. complete. |
| 32 | Providing and fixing stainless steel sink of size 600 x 200mm including coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. |
| 33 | Providing and fixing 15mm dia screw down bib / stop tap of brass including necessary socket union nut complete. |
| 34 | Providing and fixing screw down for 25mm dia wheeled stop tap of brass including necessary sockets/union nut complete. |
| 35 | Providing and fixing 100mm dia chromium plated brass showers rose to 15mm dia supply pipe including necessary bend and socket complete. |
| 36 | Providing and fixing chromium plated towel rod 16mm dia and 75 cm in length including all accessories complete |
| 37 | Providing and constructing Brick masonry Inspection chamber 60cm x 45cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels hald round GSW pipe, brick masonry plastering from inside and with frame fixed in cement concrete with RCC cover medium duty 140 kg with frame etc. complete. |
| 38 | Providing soak pit of size 120 cm x 120 cm x 120 cm including excavating and filling with brick bats |
| 39 | Providing and fixing in position UPVC ultra violet stablized 110 mm outer diameter cowl dome confirming to IS 4985 including making joints with solvent cement etc. complete. |
| 40 | Providing internal cement plaser 6mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. |
| 41 | Providing internal cement plaser 12mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete brick surface in all positions including scaffolding and curing etc. complete. |
| 42 | Providing internal cement plaser 20mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete brick surface in all positions including scaffolding and curing etc. complete. |
| 43 | Providing and preparing Kitchen otta up to 75cm width made up from 30mm thick and 75 cm high vertical support for kadappa at 1m. c/c of 25mm thick both side polished kadappa middle shelf and bottom of 20mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including etc. complete. |
| 44 | Providing and fixing black kadappa stone as shelves 25mm thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc. complete. |
| 45 | Providing and laying vertified mirror/glossy finish tiles decorative type having size 590 mm to 605mm x 590 mm to 605mm of 8 to 10 mm thickness and confirming to IS 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. |
| 46 | Providing and laying vertified mirror/glossy finish tileshaving size 590 mm to 605mm x 590 mm to 605mm of 8 to 10 mm thickness and confirming to IS 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. |
| 47 | Providing and laying Antiskid Ceramic tiles of approved quality of size 30cm x 30cm and confirming to IS 15622-2006 (Group B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete |
| 48 | Providing and laing ceramic tiles of having size 30cm x 30cm and confirming to corresponding IS for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. |
| 49 | Providing and fixing machine cut machine polished 18mm to 20 mm thick telephone black/Amba white/ cat bary brown/ RBI red/ Ocean brown granite stone for treads and risers of steps and staircases of approved dolour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 cement etc complete. |
| 50 | Providing Half-round Moulding (Full Moulding) to 18mm to 20 mm thick granite stone including fine polishing and cleaning etc. complete. |
| 51 | Providing and laying cement concrete flooring 40 mm thick with M20 cement concrete laid to proper level and slope in alternate bays including compaction filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagona |
| 52 | Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings with brass mortise lock, chromium plated handles on both side and finisning with french polish etc. complete. |
| 53 | Providing and fixing solid core flush door shutter commercial in single leaf 32mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixture and fastenings and handles on both sides and finishing with oil painging 3 coats complete. |
| 54 | Providing and fixing 32mm thick one piece single moulded puff ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including toilets made up to outer ABS sheet of 1.2 mm thick having puff insulation of 35 to 40 Kg/cum density and 10 mm dia for steel bars 2 Nos, wooden block to receive fixtures having MS hinges 100mm length MS handles 150 mm length and 10mm dia sliding door bolt etc. complete. |
| 55 | Providing and fixing in position (as per 1868/ 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90mm at weight 0.637 kg/ Rmt with window frame bottom track section 92x31.75x1.30 mm at weight 1.070 kg/Rmt. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/rmt. etc. complete. |
| 56 | Providing and fixing in position powder coated aluminium louvered windows/ ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. |
| 57 | Providing and applying impression 24 carrat luxury paint of approved make and approved brand Emulsion paint to interior walls and ceilings of approved quality colour and shade to new surface in two coats, including sub surface prparation by acrylic putty and acrylic primer coats including scaffolding, preparing the surface etc. complete. |
| 58 | Providing and applying 2 coats of 100% pure acrylic low VOC water based paint with to withstand for period of atleast 5 years of approved make paint should provide durable long lasting silk finish with high resistance to UV and resistance to spreading of flame. Paint should protect against concrete carbonation with R value of minimum 600 and ability to build cracks upto min 0.7 mm.... etc complete |
| 59 | Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting... etc. complete. |
AI Tender Summary
Tender Timeline
Jan 22, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 29, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 30, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender