|
| 1 | Dismantling tile work in floorslaid in cement mortar including stacking material within 50 metres lead |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge |
| 3 | Demolishing brick work in cement mortermanually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kinds of soil |
| 5 | Providing and laying in position cement concrete 1:4:8 using stone agg 40mm nominal size excluding the cost of centering and shuttering - All work up to plinth level |
| 6 | Reinforced cement concrete work 1:1.5:3 with 20 mm graded stone aggregatein columns, pillars,etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth inCement mortar 1:6 (1 cement : 6 coarse sand) |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth levelin all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 9 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level . Cement mortar 1:4 (1 cement :4 coarse sand) |
| 10 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources) |
| 11 | Reinforced cement concrete work 1:1.5:3 with 20 mm graded stone aggregatein Beam /intels,bands etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing andreinforcement |
| 12 | Centering and shuttering including strutting, propping etc. and removalof form for Columns |
| 13 | Centering and shuttering including strutting, propping etc. and removalof form for Lintels, beams |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) on brick wall internally |
| 16 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 6 coarse sand) on brick wall Externally |
| 17 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre,fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,all as per manufacturer\"s specification and also including the cost of making openings for light fittings,all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum moisture resistant board |
| 18 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. Glazed Vitrified tiles Matt/Antiskid finish of size 800 x 800 mm |
| 19 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x450 mm |
| 20 | Providing and fixing aluminium work for doors, windows, ventilatorswith extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make ,fixing with dash fasteners of required dia and size,Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) |
| 21 | Providing and fixing glazing in uPVC/ aluminium , window shutterswith EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions of engineer-in-charge(Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.00 mm thickness |
| 22 | Providing and fixing aluminium Anodized handle |
| 23 | Steel work in built up tubular ( square or rectangular hollow tubes etc.) trusses/ post etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc |
| 24 | Fixing onlyof Pre-coated galvanized iron profilesheet sheathing with two corrugation side lap fixed with screw with washer to roof 0.50mm (fixing with self tapping screws (PPG Sheet will be issued as free for fixing from CP store) |
| 25 | Finishing with Deluxe Multi surface paintfor interiorsusing Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 26 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 27 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 28 | Supplying and filling in plinth withsandy soilunder floors, including watering, ramming, consolidating and dressing complete |
| 29 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 30 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 31 | Water Supply & Sanitary SanitationSupplying and fixing EWC with built in Cistern,Model No- Make- Jaquar,Rimless Single Piece WC, OPS-WHT-15853S300UF ModelFixing charges |
| 32 | Providing & Fixing looking mirrorof Size, 1000x1000 mm size (5mm thick) of approved make fixed with CP screws |
| 33 | Providing & fixing Towel Rack with Lower hanger,Model-CAN-CHR-1181S(Jaquar) |
| 34 | Providing & fixing Single Lever Basin Mixer Tail Body. Model-KUP-35005-BPM (Jaquar) |
| 35 | Providing & fixing Soap Dish. Model-AQN-7731 (Jaquar) |
| 36 | Providing & fixing Corner Glass Shelf with bracket, ACN-1173 (Make-Jaquar) |
| 37 | Providing & fixing Toilet Paper Holder. Model No-CAN-1151N (Jaquar) |
| 38 | Providing & fixing CP Angle Stop Cock. Model No-ARI-CHR-39053 |
| 39 | Hand Shower (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook withN.R.V (Back Flow Preventer) Jaquar- Model No-ALD-577 |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 25 mm dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall (ISI Marked) |
| 41 | Ditto,but Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes (ISI Marked) |
| 42 | Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110 mm diameter(ISI Marked) |
| 43 | Ditto but 75 mm dia PVC pipe(ISI Marked) |
| 44 | Supply only Jaquar Shower Encloser JSE-CHR-R820G1620L of Size 1950mm widex 1950 mm height along with Fixing & Transportation Charges |
| 45 | Supply & Fixing Jaquar Shower panel of approved make & sample. JPL-SSF-ST8858B3 along with Fixing & Transportation charges |
| 46 | Supply & fixing Table Top wash hand basin of approved size & make Fixing & Transportation charges including waste pipe & Coupling |
| 47 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for WHB platforms and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement. Granite stone slab colour black |
| 48 | Double Arm Wall Mounted Reversible Magnifying Mirror- CAN - 1193 N along with Fixing Charges |
| 49 | Towel Ring Round- AQN-7721 along with Fixing Charges |
| 50 | Providing & Fixing UPVC sliding shutter with 4 mm thick frosted glass |
