Procurement Of Furniture And Utensils For 50 Bedded (G+2) Shelter For Urban Homeless (Suh) Under Day-Nulmat Dag No. -3177,Khatian No.-3366, Jl No.- 19, Ward No.- 20 Within Hooghly-Chinsurah Municipality Under Hooghly District

Sharing tender

Procurement of Furniture and Utensils for 50 bedded (G+2) Shelter for Urban Homeless (SUH) under DAY-NULMat Dag no. -3177,Khatian No.-3366, JL No.- 19, Ward No.- 20 within Hooghly-Chinsurah Municipality under Hooghly District 50 Bedded Shelter For Urban Homeless Under Day Nulm At Dag No 3177,Khatian No 3366, Jl No 19, Ward No 20 Within Hooghly Chinsurah Municipality Under Hooghly District Procurement Of Furniture And Utensils For 50 Bedded Shelter For Urban Homeless Under Day Nulm At Dag No 3177,Khatian No 3366, Jl No 19, Ward No 20 Within Hooghly Chinsurah Municipality Under Hooghly District , Single Cot (Single) Specifications - Supply Of Bed Of Dimension 1980 Mm X 915 Mm X 475 Mm X 650 Mm. The Bed Frame To Be Made Up Of Rectangular Pipe 50.8 Mm X 25.4 Mm X 1.2 Mm Thk Ms Erw Tube As Per Is:7138 Standard. Head & Tail Board Are Made Up Of Sq Pipe 38.1 X 1.2 Mm & Sq Pipe 25.4 X 10 Mm Thk Ms Erw Tube As Per Is 7138 Standard. Supp Bracket 3.2 Mm Thk Ms Sheet As Per Is: 513 Standard. Connect With Bed Frame With Mb Nut & Bolt. Finish: Epoxy Polyester Powder Coated. Dft: 40-60 Micron. Manufacturer Should Have Green Guard Certification Along With Products Certifications Like; Bifma Level 2 Conforms To Ansi/Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2011, Ohsas 18001:2007 Is Mandatory. Manufacturer Should Have Green Guard Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. The Manufacturer Should Have The Service Set Up At The District Level For Better Serviceability For Last 5 Years. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. , Bed Side Smallcabinet. Specifications -Pedestal Of Dimensions 390 (W) X(D) X 497 (H). Welded Assembly 0.8 Crca For Body Shell ,Side Stiffne Bottom. 1.2Thk Crca For Top Bottom Stiffner.0.6 Thk Crca Metal And Drawer Front. 0.5 Thk Crca Dra Side -Bottom - Side And Dra Bock.Crca D Grade Sheet As Per Is -5 Com Lock & Central Locking Actuator Cabinet2dr Ped50 Leve Locking Channel Mechanism. Top Pa 8 Mm Thk Metal Straight Edge T Manufacturer Should Have Greengu Certification Along With Prod Certification Like; Bifma Level Conforms To Ansi/Bifmae3-20. Furniture Sustainability Standard Issue By Bifma .Othercertificates 9001:2015,Iso 14001:2015,50001:2011, Ohsas 18001:2007 Mandatory. Manufacturer Should H Green Guard Certification For Few O Products. All The Iso Should Be Obtained From Nabcb (Central G Accredited Organization ) Other Certificates Will Not Be Accepted. Manufacturer Should Have The Se Setup At The District Level For Be Serviceability For Last 5 Years. Sam And Factory Visit Is Mandatory To Ins As Per The Requisite. , Cup Board Specifications -Supply Of Storage Of Dimension: 900Mm(W) X 507Mm(D) X 1372Mm(H). Completely Knock Down Construction .Removable Skirting To Cover Integral Legs. Legs Fitted With Screw Type Leveler. Made From Combination Of Crca 0.8 Mm & 0.6 Mm Thickness. Steel Hinged Door. 2 Shelves, Completely Adjustable Over The Total Height Of The Cupboard. Handle & Base Aesthetically Appealing, Ergonomic, Flush With Door Made Of Mazak. 3 Way 90 Degree Removable Key Type Cam Lock & Locking Mechanism. Epoxy Powder Coated To The Thickness Of 50 Microns (+-10). Manufacturer Should Have Green Guard Certification Along With Products Certifications Like; Bifma Level 2 Conforms To Ansi/Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificatesiso 9001:2015, Iso 14001:2015, Iso 50001:2011, Ohsas 18001:2007 Is Mandatory. Manufacturer Should Have Green Guard Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. The Manufacturer Should Have The Service Set Up At The District Level For Better Serviceability For Last 5 Years. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. , Mattress + Pillow + Bed Cover + Rag + Mosquito Net Specifications - Size In Mm: 1981 X 914X 110, Mattress Total Thickness 10 Mm 18 D Foamquiltpanel,90 Mm 28 Dsupportive Hard Foam, 10 Mm 18 D Foam Quilt Panel ,80-85 Gsm Polyster Fabric. Mattress Thickness Tolerance Length/Width( +/- 1.2Cm), Height(+/- 0.5Cm), Density(D) Tolerance (+/-2Kg/M3). , Cooking And Gas Connection With Oven Specifications - As Per Market Standard. , Water Purifier Specifications - Storage Minimum 10 Litre, Ro+Uv (Automatic). , Almirah Specifications - Supply Of Storage Of Dimension: 900 Mm (W) X 450 Mm (D) X 1830* Mm (H). Rigid Knock Down Construction. Prime Quality Crca** Steel - Panels From 0.6 Mm Thick (±0.07Mm) & Front Frame, Shelf 0.8 Mm Thick (±0.08Mm). Crca ‘D’ Grade As Per Is:513. Full Height Steel Hinged Door. Plastic Recessed Handle Cum Cam Lock. 3 Way Locking Mechanism With Shooting Bolt Arrangement. Height Wise Adjustable Shelf Mounting. Uniformly Distributed Load Capacity Per Each Full/Half Shelf Is 40 Kg Maximum. 4 Nos. Of Adjustable Full Shelves. Screw Type Leveler With Hex. Plastic Base (Add In Unit Height Min-8Mm & Additional 5Mm Max. For Adjustment. Plain & Partition : Metal Top Only. Epoxy Powder Coated To The Thickness Of 50 Microns (+/-10). Manufacturer Should Have Green Guard Certification Along With Products Certifications Like; Bifma Level 2 Conforms To Ansi/Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificatesiso 9001:2015, Iso 14001:2015, Iso 50001:2011, Ohsas 18001:2007 Is Mandatory. Manufacturer Should Have Green Guard Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. The Manufacturer Should Have The Service Set Up At The District Level For Better Serviceability For Last 5 Years. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. , Office Table Specifications - Supply Of Office 1Desk With One Drawer Attachment Of Dimensions: 1200 X 600 X 750Mm. Made Up Of Prelaminated Particle Board With 18Mm Thick Table Top And 15Mm Thick Understructure Covered With Pvc Lipping. Manufacturer Should Have Green Guard Certification Along With Products Certifications Like; Bifma Level 2 Conforms To Ansi/Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificatesiso 9001:2015, Iso 14001:2015, Iso 50001:2011, Ohsas 18001:2007 Is Mandatory. Manufacturer Should Have Green Guard Certification For Few Of Its Products. All The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. The Manufacturer Should Have The Service Set Up At The District Level For Better Serviceability For Last 5 Years. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. , Kitchen Cabinet Specifications - As Per Market Standard. , Utensils For Cooking And Food Specifications - A. Aluminium Handi (With Cover) - 10 Kg Size. (1 No) B. Aluminium Kadai (With Cover ) - Large- 18 No. Size. (2 Nos) C. Aluminium Dekchi- Large( With Cover) -Large- Dia 24’’ & Height-12’’. (2 Nos) D. Aluminium Dekchi- Small (With Cover) - Dia-18’’ & Height-10’’. (2 Nos) E. Steel Drum-Dia-12’’ & Height 16’’. (2 Nos) F. Aluminium Bucket (Food Serving)- 5Ltr (5 Nos) & 10 Ltr. (5 Nos) G. Steel Thala Standard Quality- (Make- Jindal & Other). (50 Nos) H. Steel Bati Standard Quality- (Make- Jindal & Other)- 150 Ml Size. (50 Nos) I. Steel Glass Standard Quality- (Make- Jindal & Other)- 250 Ml Size. (50 Nos) J. Steel Spoon Standard Quality- (Make- Jindal & Other)-(50 Nos) K.Steel Tray/ Gamla Standard Quality- (Make- Jindal & Other)- Size- 10’’ X 16’’/ 2 Kg Size. (2 Nos) L. Steel Jug- 2 Ltr- (Make- Jindal & Other). (20 Nos) M. Steel Hata - (Food Serving)- (Make- Jindal & Other). (4 Nos) N. Aluminium Tea Kettle-3 Ltr Size. (2 Nos) O. Aluminium Tea Saucepan- 2 Ltr Capacity. P. Khunti – Large As Per Requirement Of Sl. No. 2. (2 Nos) Q. Hata – Large As Per Requirement Of Sl. No. 1 & 3. (2 Nos) R. Steel Basket. Size - 22 X 17 X 9 (1 No) , Dining Table Specifications - Pvc Dining 6 Seater 4 Legged Rectangular Shape Dining Table With 6 Chairs. , Plastic Chair Specifications - Std , Television Set Specifications -Size (In Inches) 32Inches, Type Led Resolution 1366 X 768 Pixels,Ratio 16:9, Dynamic Contrast Ratio Mega Contrast,Refresh Rate 100Hz Picture Processor Hyper Real Engine, Color Enhancer Wide Color Enhancer (Plus), Warranty: 3 Year Standard Manufacturer Warranty.