Tender For Construction Of Road From Habla More To Nepura Adjacent To Garhbeta Hoomgarh Pwd Road At Amkopa Gp, 8 No Anchal Under Garhbeta-I Development Block In The District Of Paschim Medinipur Under Ridf Xxix
Tender Value
1.02 Crore
Estimated cost
Bid Submission
12 Feb 2024
0 days left
EMD
2.06 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Road From Habla More To Nepura Adjacent To Garhbeta Hoomgarh Pwd Road At Amkopa Gp, 8 No Anchal Under Garhbeta-I Development Block In The District Of Paschim Medinipur Under Ridf Xxix
BOQ
| Sl. No. | Item Description |
| 1 | PAVEMENT WORKS |
| 2 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specifications Clause 201 for Rural Roads of MORD.(I) By Mechanical Meansb) In area of nonthorny jungle |
| 3 | Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary.a) Depth up to 150 mm. |
| 4 | b) For each additional Depth of 150mm and part thereof. |
| 5 | Construction of Embankment with Material Obtained from Borrow PitsConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 for Rural Roads of MORD. (Mode of measurement: pre works and post works)a) Carriage up to total lead of 1.0 km. |
| 6 | Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).Grade -IIUsing Stone chips and Sandi) (1st +2 nd)layer of GSB |
| 7 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnesin stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(ii) Grading-I Aggregate (63 mm to 45 mm) UsingStone Screening Type B (11.2 mm) for 75mm thicknessb. Manual Means1st Layer of WBM I |
| 8 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnesin stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).Grading - II aggregate (53-22.4mm) with Type - B Screening for 75 mm compacted thickness.Using manual means :1st Layer of WBM II |
| 9 | Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface andspraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(i) For WBM / WMM Surface: (with primer @ 0.70-1.0 kg/sqm)Onfor Propose carriageway |
| 10 | Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including costand carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(ii) On Granular surfaces treated with primer(Using Bitumen emulsion at the rate of 0.25 to 0.30 kg per sqm.)Onfor Propose carriageway |
| 11 | Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD.Onfor Propose carriageway |
| 12 | Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixingcleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).I) By Mechanical Means(i) With Hot Bitumen Binder (@ 6.80 kg / 10 sqm.)Onfor Propose 3.75 m BT road |
| 13 | Plain / Reinforced Cement Concrete in Openfoundation with or without reinforcements, in anypart of foundation of bridges / culverts with gradedstone chips of appropriate nominal sizes, includingscreening and cleaning of coarse aggregates, fineaggregate (sand) conforming to proper gradingzone, both of approved quality and cement, asnecessary, cost of curing with water, including costand carriage of all materials and includingpreparation of design mix, approval of the same bythe Engineer-in-Charge, cost for quality control,sampling, testing etc. including cost of formwork butexcluding reinforcement complete as per drawingand technical specifications.(Pakur Varity)A PCC Grade M30For 3.75m width CC road |
| 14 | supplying and laying polythene sheet on foundation trenches etc ( below CC Road ) |
| 15 | CROSS DRAINAGE WORKS |
| 16 | Excavation for Structures Earth work in excavation of foundation of structures asperdrawingandtechnicalspecification,includingsettingout,removing,spreadingor stacking of spoils within a lead of 150 m. as directed andincludingtrimmingthesidesofthetrenches, leveling,dressingandrammingthebottom,and backfilling with approved material complete as per direction of the Engineer-in-Charge. |
| 17 | Providing and laying Design Mix concrete for plain /reinforced concrete work in any part of bridge(excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality andcement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete including cost of labour and materials for formworkbut excluding cost of reinforcement works.PCC Grade M-15 Normal 1:2:4 |
| 18 | Bedding for Pipei) Type A (Concrete Cradle) Bedding Laying concrete cradle bedding with M15Grade Cement Concrete as per Clause 1105 (i) or Rural Roads of MORD |
| 19 | Plain / Reinforced Cement Concrete in Substructure with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality, cement and water reducing admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete as per drawing and technical specifications.PCCGrade M-20 |
| 20 | Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row :Providing and laying reinforced cement concrete pipe NP3 with spigot socket for culverts on first class bedding of granular material in single row including fixing with cement mortar 1:2 as per Technical Specification Clause 1106 for Rural Roads of MORD.(f)600 mm dia |
| 21 | PROTECTIVE WORKS |
| 22 | 150 mm and 100 mm dia5 m long UC ballah pilling Eucalyptus bullah pile walling using 150mm and 100 mm dia bullah driven about two third length of the pile into ground and keeping the rest one third length above the ground with spacing @ 375 mm centre to centre, protecting the pile head with iron ring and cutting and shapingheads before and after driving, keeping the piles in line, level and position, fixing threerows 100mm dia of half split bullah horizontally as runner, providing 2.5 mlong half bullah ties of 100mm dia @2.0m centre to centre fixed with 100mm dia bullah posts driven about 1.5m below the ground level complete as per direction with all tools and tackles including coaltarring the entire bullah length before driving, including supplying ,hoisting and placing in position and placing earth filled cement bags in two rows as per drawing and direction complete. The rate is inclusive of all labour, materials including necessary spikes, bolts and nuts and one coat of coal tarring complete. Diameter of the pile should be measured at 1.50 m from the thicker end. Joints of main pile and stay piles connected with ties and runners are to be tied with 8mm dia M.S. nuts & bolts. Other joints of main pile and runners are to be fixed in position using M.S. spikes. (Measurement to be taken along the length of walling after finishing the work). as per direction of the Engineer-in-Charge. |
| 23 | ROAD SAFETY WORK |
| 24 | Supplying fitting and fixing R.C. guard post 1.37m long with C.C. 1:2:4 with graded stone chips of 13.2mm down casting , curing complete including cost of providing 4nos.of 12mm dia. rod of length 1.54m as main reinforcement and 6 nos. of round shaped 8mm dia rods used as binders; the placing of the first binder should be at 75mm below the top finished surface and the other 5 nos of binders should be placed at 245mm c/c ; the guard post is of octagonal section with inscribed circle of dia 24cm at the base tapering to corresponding dimensions of 16cm at the top including two coats of painting with best quality synthetic enamel paint of approved make and grade to form 6 nos. horizontal alternate bands in white/tannery yellow and black to 90 cm length standing up above ground after mendinggood damages if any during striking off shuttering,making hole in ground of 47cm depth and 30cm. minimum dia, fixing the guard posts in the sameholes and repacking the earth properly so as to keep the guard posts standing properly erect in correct position true to line and length including carriage of R. C. Guard Post with due care to the site including loading into the truck and unloading at site complete in all respect. With Pakur variety stone chips |
| 25 | ReinforcedcementconcreteM15gradekilometre stone ofstandarddesignas per IRC:8-1980, fixing in position including painting and printing etc.(ii)Ordinary kilometer stone (precast) |
| 26 | Retro-Reflectorised Traffic Signs :-Providing and fixing of retro- reflectorised cautionary,mandatory and informatory sign as per IRC :67 madeof high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Worksof MoRT&H (5th Revision). ii) 600mm equilateral triangle |
| 27 | iii)600mm Circular |
| 28 | vi)600mm X 600mm square |
| 29 | Direction and Place Identification Signs upto 0.9 sqm Size Board. Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). |
| 30 | ADD GST @18% |
| 31 | ADD LABOUR WELFARE CESS @1% |
AI Tender Summary
Tender Timeline
Jan 22, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 12, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 15, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender