Military Engineer Services-MES has published Tender For Provision Of Covered Pathway From Simulator Building (P-172) To Ge Workshop (P-47) At Niat,Addn/ Altn To Food Testing Lab In Building No P-14 At Bv Yard Kochi And Special Repairs To Basketball Court And Volleyball Court At (Bldg No P-255 B) Ne. Submission Date for this Tender is 19-02-2024. Footpath Work Tenders in kochi Kerala. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Feb-2024 | Corrigendum_1 | BOQ | 12-02-2024 |
| 2 | 12-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-02-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of brick/PCC Block masonary work built in cement mortar complete all as specified and as directed. |
| 2 | M&L precast cement cocrete block masonary (Type C1 1:3:6 )with solid blocks exce 10 cm width and setting in motar 1 :6 complete all as specified and as directed. |
| 3 | M&L for rendering 10 mm thick on fair faces internal cement plaster in CM 1:6 on fair faces of brickwork or concrete surfaces is to be finished even smooth with out using extra cement complete all as specified and as directed. |
| 4 | M & L for preparation new plaster on internal surface of walland applying 2 mm thick wall care putty on new wall surfaces and & applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer all as specified and directed by Engineer in charge |
| 5 | M & L for preparation & complete removal of existing treatment on internal surfaces of walls, and applying2 mm thick wall care putty on old plaster surfaces, preparatory to distempering& applying two coats of distemper oil emulsion on primered surfaces all as specified and directed by Engineer in charge complete all as specified and directed. |
| 6 | M&L for RCC(Nominal Mix) in type-B1 1:2:4 (20mm graded aggregate) pre cast slabs supported on walls for cup board and Kitchen slabs,manhole covers,drains complete all as specified and as directed. |
| 7 | M&L for mild steel TMT bars 10MM dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete and all as specified and directed. |
| 8 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed. |
| 9 | M & Lfor 20mm thick granite stone slab( Jet black ) over cement screed 15mm thick inCM 1:4over RCC Slabcomplete all as specified and directed . |
| 10 | S&F powder coated anodised aluminium frame windows, door, ventilator with one or more rebates including joining cleat for fixing etc. complete (Sliding type/Side hung type) |
| 11 | S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 12 | S&F powder coated aluminium door shutters, with 4mm thk coloured/wooden grain aluminium composite panel (approved by Engr-in-Charge) including necessary joining cleats, glazing clips, ruber neoprene packing, suitable handle, tower bolt, SS butt hinges,mortice lock 4 lever with 65 mm latch anodised aluminum snap beading screws etc. complete all as specified |
| 13 | S & F sheet glass, plain4.00mm thickglazing withaluminum beading& rubber gaskets etc not exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed. |
| 14 | S & F sheet glass, plain4.00mm thickglazing withaluminum beading& rubber gaskets etcexc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed. |
| 15 | S & F 15 mm borepillar taps, cast copper alloy with capstan heads , Chromium plated screwed down high pressure with or without lettered "Hot " or "cold" with long screwed shanks and fly nuts , screwed for iron pipes fancy type complete all as specified and directed. |
| 16 | S&F in repair vitreous china wash hand basin (padestal pattern), white, flat back, size 450mm x 300mm, exc chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed. |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the permises complete all as specified. |
| 18 | M& L for Glazed ceramic tiles in vertical surface 300x200x 6-7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchincludingrendering 10 mm thick in CM 1:6 on fair face of brick work or concrte surface finished to receive tiles complete all as specified and directed. |
| 19 | M&L Non skid ceramic tile of size 300x300 7-8mm thick in floor over cement screed 15 mm thick in CM 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 20 | S&F mild steelwork in framing, purlinusing section such as angle, hollow pipes , flats , etc using Fe-290Grade E-165 complete all as specified and directed. |
| 21 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws complete all as specified and directed. |
| 22 | S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 23 | M&L for preparation ofnew steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer complete all as specified and directed. |
| 24 | S & F 180 mm width rectangular PVC SWR ready made eaves gutter of pressure rating 6 Kg/cm2 of approved make including necessary fitting like bend WC/MS Clips etc complete all as specified and directed. |
| 25 | S & F 150MM dia of PVC (SWR) pipe single socketed in any length with rubber joints including necessary fitting like bend WC/MS clips etc fixed on walls complete all as specified and directed. |
| 26 | M&L for Cement concrete type B- 1, 1:2:4 (20mm graded aggregate) for coping or chamfered on edges complete all as specified and directed. |
| 27 | M&L for 75 mm thick PCC 1:4:8, Type D-2 using 40 mm graded stone aggregate complete all as specified and directed. |
| 28 | M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 29 | M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm spreading and levelling in layers n exc. 25 cm thick andr well ramming including watering as required complete all as specified and directed. |
| 30 | S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness ,M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 31 | Taking down of existing floor treatment consisting of screed bed plaster etc and removal of dismantled materials complete all as specified and directed by Engr in Charge. |
| 32 | M&L for PCC type B-1 (1:2:4), 25 mm thickusing 20 mm graded stone aggregate as in floor includingmixing , compacting and finishing using trimix flooring maching complete all as specified. |
| 33 | Supply and apply all weather proof acrylic synthetic cushion coating system area of Eight layersconsisting of following layers as per the standard of international Authority of sports like ITF and fixed as per manufacturer instructions, specified and directed by Engr-in-charge:- (i) Primer :- 100% synthetic court of Acrylic (KDF) based emulsion to improve bond of acrylic court sustem to the concrete or asphalt surfaces (ii) Resurfacer:- Synthetic court of Acrylic Resurfacer 367-30 for filling and smoothing asphalt or concrete surfaces in prepration for synthetic court of Acrylic ITF Approved multisports courtsystem and also fulls the surfaces chips , voids and conceals repairs while providinga smooth surfaces of color coating (iii) Cushion coat :- 4 Layers of synthetic court of Acrylic (KDF) cushion for asphalt or concretesurfaces in prepration for synthetic court of Acrylic (KDF) ITF approved system (iv) Precoat :- 2 layer of synthetic court of Acrylic (KDF) based textured basket ball and volley balltopcoat. Ideal for color coating Multisport courts and other sport pavement surfaces. (v) Over line :- 100% synthetic court of Acrylic (KDF) based high hiding line paint. |
| 34 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for. |
| 35 | M&L for providing cement concrete Type B0, 1:2:4 (using 12.5mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 36 | Dismantling and re fixing of basket ball pole with new basket ball rim , net and20mm thick back board transparent Acrylic with international standard built in brackets for munting duck including two coats of synthetic enamel paint over a coat of red-oxide primer,and making good surface complete as directed by Engr-in-charge. |
| 37 | Dismantling and re fixing of volley ball pole including two coats of synthetic enamel paint over a coat of red-oxide primer and making good surface complete as directed by Engr-in-charge. |
| 38 | M&L for PCC 1:3:6, Type C2 (using 40mm graded crushed stone) in foundation bed to drain complete all as specified and directed. |
| 39 | M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in coping on walls, finished even & fair incl necessary form work all as directed by the Engr-in-charge. |
| 40 | M&L for 15mm thick cement plaster in CM 1:4on fair faces of brick/ concrete surface finished even and smooth with out using extra cement complete all as specified and as directed. |
| 41 | S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290 Gde E-165. complete all as specified and directed. |
| 42 | Preparation of new steel surface of any description or 10cm width or girht and applying 2 coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 43 | Extra for forming of fair finished drain or channel having 30cm inner girth in cement concrete complete all as specified and directed. |
| 44 | S&F in replacement on wall/ concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 20 mm dia including taking down old one complete all as specified and directed. Make- Supreme/ Eurotech/ Astral/ SFMC. |
| 45 | S&F in replacement of bib tap Chromium plated (CP), half turn with flange and areator, fancy type long body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15mm and taking down old, complete all as specified and as directed by the Engineer-in-charge. Make- Cera Cat Part No. F2004152 or Prayag/ Hindware. |
| 46 | S&F 15mm angle valve, half turn with flange, with flange type chromium plated for fixing with CPVC pipe and taking down old one, complete specified and as directed by the Engineer-in-charge. Make- Cera Model No. F2004201 or Prayag/ Hindware. |
| 47 | S&F in replacement pillar taps, half turn with areator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe, and taking down old one, complete all as specified and directed by the Engineer-in-charge. (Make: Cera or prayag/hindware). |
| 48 | S&F PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm Gl pipe and taking down old one, complete all as specified and directed by the Engineer-in-charge |
| 49 | Taking down carefully existig copper/alumn point wiring for light/fan/bell/socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens/conduits/wires, T/L fittings and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and directed. |
| 50 | S&F point wiring with 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metalic (ISI marked) fixed concealed on wall/ roof except beam, column and RCC roof including chases cutting incl suitable size/ cap of sunken box for modular switch and socket and modular white cover plate, flush metal box etc inxl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light point controlled by one switch and making good disturbed surfaces of walls, floors etc complete all as specified and as directed. |
| 51 | All as per item No. 50 here-in-before but One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board. |
| 52 | All as per item No. 50 here-in-before but One 3 pin 5 Amp socket outlet point controlled by one switch on same board. |
| 53 | All as per item No. 50 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable. |
| 54 | M&L Switch modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed. Make-Anchor |
| 55 | M&L Switch modular type 16 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed. Make-Anchor |
| 56 | S&F Socket outlet modular type 6A-2 in 1, without shutter, 2 module, duly ISI marked, complete all as specified and directed. Make-Anchor |
| 57 | S&F Socket outlet modular type 16A, 3 pin combined, 2 module, duly ISI marked, complete all as specified and directed. Make-Anchor |
| 58 | S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed. |
| 59 | Supply and fixing LED light fitting 1 x 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 60 | S&F Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail, suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified. |
| 61 | S&F MCB SPN, 40A 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified. |
| 62 | S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified. |
| 63 | S&F in replacement SPN enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA, including taking down old unserviceable earth plug complete all as specified. |
| 64 | S&F wall mounted air circulator fan heavy duty of sweep size 750mm, 1400 RPM, single phase, 220- 240 Volts, 50 Hz, complete with all fixing/ hanging arrangements directed by manufacturer on wall or as existing working spot including provision of PVC flexible copper cable of suitable size/ length as required complete all as specified. |
| 65 | M&L for Sub main wiring with two single core 2x4 sqmm FRLS insulated and unsheathed stranded copper conductor alongwith earth wire 4.0 sqmm drawn in FRLS rigid conduit connected to main board complete all as specified and directed Note: Two runs cable and one run earth wire and suitable FRLS conduit shall measured as one unit length. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
