Tender For Up-Gradation Of Electrical Network And Street Light System And Annual Maintenance Contract Of Street Light For 3 Years At Ia Salon Raebareli.
Tender Value
20.83 Lakhs
Estimated cost
Bid Submission
24 Feb 2024
0 days left
EMD
49200
Bank guarantee accepted
Document Fee
2065
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raebareli → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Up-Gradation Of Electrical Network And Street Light System And Annual Maintenance Contract Of Street Light For 3 Years At Ia Salon Raebareli.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Feb-2024 | Extension of date | Date | 16-Feb-2024 |
| 2 | 17-Feb-2024 | Extension of date and time | Date | 24-Feb-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing ofLED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 90 watt confirming to IP 66 and above protection complete in all respects (With 5 Year Guranteeall type (including Damge ) Repair And Maintenace Catt. AA as per UPPWD Sch. No.1423 (Bajaj /Philips/Crompton/Wipro Make) |
| 2 | Supply & Fixing of 32 mm Dia 1.20 Mtr long G.I Pipe Bracket for fixing of LED lights complete in all respects with clampetc.UPSIDC |
| 3 | Supply & fixing of \"\"D\"\" clamp of size 50x6 mm flat iron on ST poles/Steel rail Poles with Bolts, nuts and washers etc. complete in all respect as per UPPWD Sch. No. 623 |
| 4 | Supply & fixing of 100 x 110 mm shackle insulator /100 x 80 mm pin insulator including G.I. Bolts/ spindle nuts etc.Complete in all respect.as pre UPPWD Sch. No. 621 |
| 5 | Supply, sagging, jointing and binding of insulated ACSR Weasel conductor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect.UPSIDC Sch. No.E10.08 |
| 6 | Supply and erection of steel tubularpole 410-SP-29, 9 m long 129 Kg complete with 1/6th of overall length of pole below ground level with 45 cm dia cement concrete with 45cm dia cement plinth around the pole and 45cm above the ground level.(SIDC Sch. Er 02.02) |
| 7 | Supply & erection of stay of Composite mains for ST pole with GI anchor plate (152X152X6mm)stay rod (16mm dia X 1.85 m Iong),GI stay bow (16 mm dia rod,thimble,double stay tightener,clamps & stay wire (GS 7/3.15 mm) including grouting in 1:4:8 ratio of cement concrete using coarse sand,over burnt brick ballast as per direction of engineer in charge complete in all respectas per SIDC sch.No E32.01 |
| 8 | Supply & wiring of submain with 2 Nos. of 2.5 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cables in existing conduit complete with supply of all material labour and T&P reuired for proper complation of the work as directed as site byEngineer I/C as Per UPPWD sch No. 289(Polycab /KEI/ Havells/ Grandley/Gloster Make ) |
| 9 | Supply & laying 16 sq mm 2 core Al. conductor PVC insulated armoured, served, sheathed cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(c) & 507(Polycab /KEI/ Havells/ Grandley/Gloster Make ) |
| 10 | Supply & laying 25 sq mm 3.5 core Al. conductor PVC insulated armoured, served, sheathed cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(j) & 507(Polycab /KEI/ Havells/ Grandley/Gloster Make ) |
| 11 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheathed ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (c) 16 sq. mm 2 core |
| 12 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheathed ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (j) 25 sq. mm 3.5 core |
| 13 | S/F of palm or pin type copper tin plated cablesocket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (d) 16 sq. mm |
| 14 | S/F ofpalm or pin type copper tin plated cablesocket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (e) 25 sq. mm |
| 15 | S/B of 40 mm dia x 4.5 mtr. Long GI pipe vertical for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. From the bottom complete with earthing lead of no. 6 to 8 SWG GI wire in GI pipe upto appron upto switch board 30 CM square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 701 |
| 16 | Supply and laying of 25 mm x 3mm G.I. strip from earth electrode directly in the ground as required respects as per UPPWD Sch. No. 716 |
| 17 | S/F of following capacity of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with cintractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(f) (40 Amp. TPN) |
| 18 | Supply & laying of 90 mm dia I/D HDPE DWC pipe ISI marked along with all accessories likesocket, bend, couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm delow ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as per DSR Sch. No. 14.16.2 |
| 19 | Supply, laying and fixing 50 dia GI pipe Trench Less Through manual Boggiincluding trenching 90 C.M. deep and refilling etc. Ann-2 |
| 20 | Painting of S.T.poles and all mountings on it with two coats of aluminium paint with an under coat of red oxide paint on length of the up to 10 m support above the ground level or as per direction of Engineer in charge of work/site including all T&P,men & material for proper completion of work. |
| 21 | Dismantling & re-grouting of Street liht 12 Tilt/sick bend/STP pole in 1:3:6 ratio cement concrete with stone pad including stranthening of pole by providing additional 04 nnos. Support of 65X65X6mm or higher size MS angle in suitable length with the help of welding/cutting as per tecnical specification. |
| 22 | S/F ofML-4 contactor MDS/L&T make complete including all T&P men and material required for proper completion of work |
| 23 | S/F of mounting time switch (timer Clock) L&T/MDS make complete including all T&P men and material required for proper completion of work |
| 24 | Supply & Fixing of 63 Amp 4 pole MCB complete in all respects as per UPPWD Schedule No.1020(A) Cat-B |
| 25 | Charges for maintenance,watch &wardof entire electrical system of road lighting to cover general supervision for execution of work during the period of AMC excluding the supply and fixing/installation of all materials. (01 Electrician ) |
| 26 | Cost of all material, spares wire fuses, small accessories required for general maint., cleaning, oiling etc. to keep the entire installation in perfect working order during AMC period. (L.S. Basis) |
| 27 | Supply & fixing of driver suitable for (70 to 110 watt) LED street light fittings as per make installed at Site complete in all respect |
| 28 | Supply & fixing of MCPCB with LED & Lance (70 to 110 watt) for suitable installed LED street light fittings complete in all respect |
| 29 | Supply & Fixing of Glass suitable for installed(70 to 110 watt) LED street light fittings complete with rubber gasket etc. complete in all respect |
| 30 | Supply & fixing of LDR suitable for installed (70 to 110 watt) LED street light fittings complete in all respect |
| 31 | Supply & fixing of special protection device (SPD) suitable for (70 to 110 watt) LED street light fittings as per make installed at Site complete in all respect |
| 32 | supply & Fixing of LED light strip with off-white colour light complete with driver etc.complete in all respect. (Philips, Wipro, Bajaj, Crompton Make) |
| 33 | Information Board-M.S. Sheet 16 mm Gauge 1.20X1.50mm Board with 3.0mte S.S.304 Pipe 65 mm Dia stand and Board Back Side Upper and Down S.S 304 pipe 50mm Dia and Cross Corner to Corner M.S. Sheet 16 mm Gauge Should be allingment of the board , the board Base will be Green colour paint and words will be Retro Reflection White Colour, board Grouting and Drawing and Details as per site Incharge Rate |
AI Tender Summary
Tender Timeline
Feb 17, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 16, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Feb 24, 2024
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 24, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 26, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender