Border Security Force-BSF has published Tender For Supplying_ Installation_ Testing And Commissioning Of 25 Kwp Off Grid Solar Power Plant At Bop Chandani Of 06 Bn And Bop Singhpara Of 40 Bn Bsf Under Shq Bsf Jalpaiguri. Submission Date for this Tender is 29-01-2024. Solar Power Plants Tenders in Darjeeling West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Jan-2024 | Location of site | Technical Bid | 29-01-2024 |
| Sl. No. | Item Description |
| 1 | Supply, Installation, Testing and Commissioning of Hybrid/off-grid (with the provision to charge from main power source)Solar Photovoltaic Power Plant conforming to MNRE specifications as amended & updated till date, consisting of Mono perc/Poly Crystalline silicon solar cells, necessary protections, earthing, mounted on RCC structure of suitable strength with following components complete as required as per detailed specifications Appendix:“A”.The rates quoted should be inclusive of all taxes, transportation charges , loading/unloading at site etc. as required:- a) Solar Photovoltaic Module of capacitymore than 400 Wp, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2 & BIS approved. Solar Photovoltaic Module conversion efficiency shall not be less than 19%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 165 to 265 V DC Input voltage range and 240 V AC, single phase, 2 wire, 50Hz ± 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0°Cto 50° C. c) Data Monitoring System complete with all accessories. d) Fixing of Array, junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required g) Battery: Battery array of 240 volt, 750 AH LMLA – C 10 Tubularfor back up of 8 hoursfor solar plant with suitable battery rackas per site requirement/as per manufacturer specification. |
| 2 | Construction of RCC structure for Battery bank and Control room shall be of size150 sq. feet (minimum), with height of room not less than 2.9 meters & plinth height shall be of minimum 2 meter (minimum) from natural ground level as per drawing to be approved by Engineer-in-charge. The flooring should be of RCC (must withstand the load of batteries and other equipment). Steel gates, windows-02 nos (minimum) , opening for exhaust must be installed in control room. Roof of control room must be so designed to prevent water lodging etc. complete as per scope of Work & Technical Specifications mentioned in Appendix : - "B" |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
