Public Works Department-PWD has published Tender For Interior Renovation Works In Survey Joint Director Office At Civil Station Kudappanakkunnu-Interior Renovation Works In Survey Joint Director Office At Civil Station Kudappanakkunnu-General Civil Work. Submission Date for this Tender is 27-01-2024. Civil Work Tenders in thiruvananthapuram Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Appendix A: Civil Works |
| 2 | OD193528/2023-2024:Providing and fixing 70mm thick modular type workstation partitions, verticals are provided at suitable intervals with a maximum of 900mm with powder coated solid aluminium block and are fixed in ground using fischer and screw.- panel tile based construction contained within powder coated aluminium trims . The top panel are made of 8 mm thick plain glass with etching(design as decided by the Engineer in charge) and bottom panels are made of 9mm thick plywood laminated with 1 mm suede finish laminates fixed on both sides of frame. The partition to be provided with two level raceways for conduits, one at skirting level and and one above table top level for running power, network and telephone cable with necessary machine cut and properly filled slots. The raceways are made CRCA sheets. Necessary poles and cantilevers capable of 2/3/4 way pole connection if necessary. All trims to be powder coated finish. All materials are to be scratch and fire proof, all works are as per approved design and colour decided by engineer in charge. |
| 3 | OD193529/2023-2024:"Supplying, fabricating and fixing workstation tables as per the following specifications: 1) Size of main table :1350mm L x 550mm W x 750mm H 2) Size of credenza : 700mm L X400mm W X 750mm H .(3 drawers) Structure and finishing : Top side panel are made of 25 mm Marine Ply and rest are made of 16mm Marine Ply Finishing : All surface were finished with 1mm laminate of (suede finish). Laminates are fixed to plywood by machine pressing. Edges : All exposed edges are banding with best quality PVC edge band of 2mm thick. Fittings :3Nos. of Drawers are made of marine plywood 16 mm good quality telescopic Stainless steel channel of 350 mm length, lock, handle, cable manager and bushes are to be fixed as per the approved drawings including keyboard tray, foot rest and CPU platform. The rate of table including all material, labour and carriage charges etc complete. " |
| 4 | OD193525/2023-2024:Providing and fixing storage shelf of size 2400x400x750mm, Top 25mm thick BWP Marine ply with 1mm laminate (suede finish)and all others are of 16 mm thick BWP Marine ply with 1mm laminate (suede finish) with all sides edge banding etc complete as per the direction of the department officer. Including necessary locks, auto close hinges, handle and bushes etc complete. ( All exposed sides are edge banded with PVC edge banding tape and Plywood both side machine pressed) |
| 5 | 13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 6 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 7 | 12.45.3:Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board |
| 8 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 9 | OD193531/2023-2024:Supplying fabricating and fixing of venetion vertical blinds using with glass fibre fabricated with aluminium rail including all things such as J-type runners plastic spacer,nylon chord, ball chain plastic connector , plastic slot hinges alu-rod 'L' clamp and top channel etc complete including all cost of materials etc complete. |
| 10 | 21.1.1.3:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron ) |
| 11 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 12 | 21.13:Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete |
| 13 | OD193547/2023-2024:Providing and fixing powder coated aluminium American handle 150 mm with SS screws etc. complete as per direction of Engineer-in-Charge. Powder coating minimum thickness 50 micron |
| 14 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides |
| 15 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 16 | OD193556/2023-2024:Supplying, fabricating and fixing in position wooden panelling on ceiling and walls, the panels are crafted from 12mm thick marine plywood(BWS IS no 710) of approved manufactures after cutting, shapping the plywood to the required shape as per requirements and fixed on walls, ceiling or on steel/ Aluminium frame work using screw, facia decorated with 4mm thick teak veneer century plywood or equivalent(exact colour and shade to be got approved by the client/ Engineer in charge) and bonded on marine plywood using synthetic adhesive, including providing grooves 4mm on panel facia. The rate includes cost and conveyance of all the materials, all labour charges etc. complete |
| 17 | 21.18:Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately) |
| 18 | OD193557/2023-2024:Providing and fixing Stainless steel glass door handle H-Type (25 x 450 mm) including labour for fixing etc. complete. |
| 19 | OD193558/2023-2024:Providing and fixing Stainless steel lock(glass to wall door lock) including labour for fixing etc. complete. |
| 20 | OD194090/2023-2024:Supplying and fixing self adhesive frosted privacy film on existing glass of doors and windows including cost of all materials labour for fixing etc. complete. |
| 21 | OD194123/2023-2024:Clear glossy Poly Urethane finish on wood work :Two or more coats on new works. |
| 22 | 14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work |
| 23 | OD194129/2023-2024:Coolie for various works |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
