Military Engineer Services-MES has published Tender For Cleaning Of Raw Water Storage Tank, Clean Water Ug Sump/ Ohts, Repair To Raw Water Storage Tanks Including Repair/Maint Of Filtration Plant And Chloronome Plant Various Water Supply Installation Under Ge (A) Suratgarh Mil Stn. Submission Date for this Tender is 27-02-2024. Tanks and Cylinders Tenders in suratgarh Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Feb-2024 | Revised BOQ | BOQ | 20-02-2024 |
| 2 | 09-Feb-2024 | Date Corrigendum | Date | 20-02-2024 |
| 3 | 20-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-02-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) not otherwise specifically provided for in this Schedule, complete all as specified & as directed. |
| 2 | Demolition of unreinforced cement concrete of any description and in any position (not otherwise specifically provided for in this Schedule, complete all as specified & as directed. |
| 3 | Demolition of bricks (laid flat or on edge) or brick tiles on roof terrace, in floors, channels, kerbs, aprons etc laid dry or laid dry and pointed and removing from site complete all as specified & as directed. |
| 4 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 5 | Taking down cement plaster or cement lime plaster, terrazo etc on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed. |
| 6 | Dismantling of cast iron, wrought iron or mild steel work of any description and from any position not otherwise provided for in this Schedule (BOQ), complete all as specified and as directed. |
| 7 | Excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exceeding 10 Sqm on plan & not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 8 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed. |
| 9 | Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed. |
| 10 | M&L for Sand (Local Tibba sand) filling under floors and similar locations including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed. Notes : (i) Approved local Tibba dry sand free from vegetations, grass and other deleterious substances shall be used. |
| 11 | M&L for 25mm thick sand (Local Tibba sand) with 3% cement by weight of sand, filling under floors and similar locations including spreading, leveling, watering and well ramming complete all as specified and as directed. Notes : (i) Approved local Tibba dry sand free from vegetations, grass and other deleterious substances shall be used. |
| 12 | M&L for PCC 1:5:10 type E2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 13 | M&L for reinforced cement concrete M-30 (Design mix) using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, bases for columns, mass concrete and the like complete all as specified & as directed. Note :- Reinforcement & formwork shall be measured and paid for separately. |
| 14 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. |
| 15 | M&L for brick work with old size burnt clay sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified and as directed. |
| 16 | S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, framed signed boards, walk ways, railings, framework of water tanks and similar work including welding conforming to Grade E-165 (Fe 290), complete all as specified & as directed. |
| 17 | M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed. |
| 18 | M&L for mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed. |
| 19 | S&F rolled mild steel work as in Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment including necessary welding etc. conforming to Gde E-250 (Fe 410-W) quality `A’ complete all as specified and as directed. |
| 20 | M&L for 300 micron heavy duty Polythene film (White) laid on a coat of bitumen primer @ 0.30 to 0.50 Kg per sqm complete all as specified and directed. |
| 21 | M&L for 40mm thick brick tiles, joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement, laid on roof over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified & as directed. |
| 22 | All as per serial item No. 21.00 here-in-before but except brick tiles complete all as specified & as directed. Note : Old serviceable brick tiles retrieved from serial item No 3.00 here-in-before shall be used under this item. |
| 23 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished even & smooth without using extra cement, complete all as specified and directed. Note : Supply only integral liquid water proofing compound shall be measured and paid for separately. |
| 24 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of alkali resistant priming paint complete all as specified & as directed. |
| 25 | M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed. |
| 26 | M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, including dismantling carefully and taking up or down existing unserviceable/serviceable steel water tubing and connections of 25mm bore complete all as specified and as directed. |
| 27 | M&L for Gun metal globe or gate valve, with iron wheel head, screwed both ends, ISI marked for 25mm bore pipe fixed as in repairs complete all as specified and directed. |
| 28 | Disconnecting & taking down the existing unserviceable water tank and Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I and as directed. |
| 29 | S&F in repairs Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 290 gms) complete all as specified and as directed. |
| 30 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, including hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed. |
| 31 | M&L for cutting existing CI Pipe line for 350mm bore in position for adding flanged including threading and welding work as required length for insertion of new branch, tee, collar, tail pieces, etc complete all as specified and directed. Note:- Excavation & earth work and fittings required for job shall deemed to be included in the rate quoted for this item. |
| 32 | Re-laying 350mm bore Cast iron pressure pipes with flanged ends, vertically cast, Class ‘B’, ISI marked, in any length, laid in trenches, on floors, etc, including dismantling carefully and taking up or down existing serviceable CI water pipe line and connections of 350mm bore complete all as specified and as directed. Note :- Excavation & earthwork, Joints and CI fittings / specials shall be measured & paid for separately under relevant items of this Schedule. |
| 33 | Supply and fixing Cast iron fittings (ISI marked) for Flanged Pipes upto 350mm bore such as Bends,Tapers, Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged, connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth, complete all as specified & as directed. Note :- Joints shall be measured and paid for separately under respective items of this schedule. |
| 34 | M&L for run lead joint for 350mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed. |
| 35 | Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 250 mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches complete all as specified & as directed. Note :-Excavation & earthwork, DI fittings / specials & joints shall be measured & paid for separately under relevant items of this Schedule. |
| 36 | Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K7) of 200mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches complete all as specified & as directed. Note :-Excavation & earthwork, DI fittings / specials & joints shall be measured & paid for separately under relevant items of this Schedule. |
| 37 | Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 150mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches complete all as specified & as directed. Note :-Excavation & earthwork, DI fittings / specials & joints shall be measured & paid for separately under relevant items of this Schedule. |
| 38 | Supply and fixing rubber gasket tyton joint (push on joint) including rubber ring suitable for 200mm bore socket & spigot DI pipe and fittings complete all as specified and as directed. |
| 39 | Supply and fixing rubber gasket tyton joint (push on joint) including rubber ring suitable for 200mm bore socket & spigot DI pipe and fittings complete all as specified and as directed. |
| 40 | Supply and fixing rubber gasket tyton joint (push on joint) including rubber ring suitable for 200mm bore socket & spigot DI pipe and fittings complete all as specified and as directed. |
| 41 | S&F DI fittings, Class K-12, (ISI marked) for Flanged Pipes/spigot socketed pipes 150mm to 250mm bore such as Bends, Tapers, Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged, connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth, complete all as specified & as directed. Note :- Joints shall be measured and paid for separately under respective items of this schedule. |
| 42 | Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 350mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 350mm bore, complete all as specified & directed. |
| 43 | Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 200mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 200mm bore, complete all as specified & directed. |
| 44 | Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 150mm bore, complete all as specified & directed. |
| 45 | S&F Non Return Valve of size 150mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint and including dismantling & taking out old unserviceable non return valve of 150mm bore, complete all as specified & directed. |
| 46 | S&F Non Return Valve of size 200mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint and including dismantling & taking out old unserviceable non return valve of 100mm bore, complete all as specified & directed. |
| 47 | Supply and fixing cast iron foot valve of size 150mm bore as per IS:4038 (ISI marked), swing type operation, flanged ends with rubber insertion sheet 3mm thick, nuts, bolts and washers including taking down old existing unserviceable foot valve of 150mm bore complete all as specified & as directed. |
| 48 | Supply and fixing cast iron foot valve of size 250mm bore as per IS:4038 (ISI marked), swing type operation, flanged ends with rubber insertion sheet 3mm thick, nuts, bolts and washers including taking down old existing unserviceable foot valve of 200mm bore complete all as specified & as directed. |
| 49 | M&L for Valve Pit of internal size 150cm x 150cm x 150cm built in brick masonry complete all as specified in Particular Specifications and as shown on drawing No. BTD-811 Sheet No. 1/2 & 2/2 inclduing demolition of old U/S valve pit chamber complete all as specified and directed. |
| 50 | M&L for Valve Pit of internal size 180cm x 180cm x 180cm built in brick masonry complete all as specified in Particular Specifications and as shown on drawing No. BTD-811 Sheet No. 1/2 & 2/2 inclduing demolition of old U/S valve pit chamber complete all as specified and directed. |
| 51 | S&F in replacement of Cast Iron double orifice kinetic Air Release Valve (ISI Marked) conforming to IS-14845 of size 100mm bore Class PN 1.6 type DK with SS floats, flanged inlet including high tensile bolts, nuts, washer and jointing materials etc complete all as specified and as directed. |
| 52 | Supply, installation in replacement and testing of 5 stage digital water level indicator with magnetic level sensing probe made of 16mm diameter stainless steel (SS-304) material of suitable length as required on site with float accessories and mounted on the top of RCC Over Heat Tank and microprocessor based digital indicator / controller having 100mm display size and operated with 230 Volt single phase, AC including all electrical connection complete all as specified and directed. |
| 53 | S&F in repair Mild steel, plain black sheet, 1 mm thick in wall cladding, water tank, Valve Pit chamber, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plaint 40mm lap joints or welded seams complete al as directed by Engrineer-in-Charge. |
| 54 | Supply and fixing flat submersible copper cable multistranded 1.5 sqmm 3 core, PVC inulated and PVC sheathed industrial cable suitable for submersible pump motor 1100 volts grade including dismantling & taking out old unserviceable cable complete all as specified and directed. |
| 55 | Supply and fixing in replacement of three phase submersible pump contoller, DOL starter, in sheet metal enclosure, 415 V, 50 hz, 3 phase, for 7.5 HP pump, relay (13-21) Amps with single phase preventer and all electrical connection complete all as specified and directed. Make: L&T Model : MU-G10 DOL Cat Part No SS95983COCO |
| 56 | Supply and fixing in replacement of three phase submersible pump contoller, with voltmeter and amp meter, DOL starter, in sheet metal enclosure, 415 V, 50 hz, 3 phase, for 5 HP pump, relay (6-10) Amps with single phase preventer and all electrical connection complete all as specified and directed. Make: L&T Model : MU-G6 DOL Cat Part No SS97756COVO |
| 57 | M&L for cleaning of inner surfaces of RCC over head reservoir following capacity (staging upto 21 mtrs) manually by trained and skilled manpower for working in over head reservoir with suitable T&P and equipments with safety measure as required. Draining out the muddy water from the bottom surface of OHT then clean the inside walls, scraping with the help of wire brush, inlcuding removal green algae, dirt etc anddrainning out complete unwanted material obtained from cleanning as well as apply disinfictant / bleaching powder, chemical safe for human being on inner surface of the tank including writing the words in capital letters “TANK CAPACITY, DATE OF CLEANING, NEXT DUE DATE” on outerside visible place of overhead tank with synthetic enamel white paint (white) over black background complete all as specified and directed by Engr-in-Charge. Note: (i) Contractor shall be solely responsible for insurance of his workers as working at height and arrangement for approching in the tank and safety measures. (ii) Necessary arrengement shall be made by the contractor for smooth supply of water during cleaning or other bypass arrangement as required at site without any extra cost to the department. |
| 58 | Approximate storage capacity of OHT, upto 0.50 Lakh gallons |
| 59 | Approximate storage capacity of OHT, 1.0 Lakh gallons |
| 60 | Approximate storage capacity of OHT, 1.5-2.0 Lakh gallons |
| 61 | M&L for cleaning of inner surfaces of RCC underground/ semi underground clear water reservoir following capacity, manually by trained and skilled manpower for working in under ground reservoir with suitable T&P and equipments with safety measure. Draining out the muddy water from the bottom surface of tank then clean the inside walls, scraping with the help of wire brush, inlcuding removal green algae, dirt etc and drainning out complete unwanted material obtained from cleanning as well as apply disinfictant/ bleaching powder, chemical safe for human being on inner surface ot the tank including writing the words in capital letters “TANK CAPACITY, DATE OF CLEANING, NEXT DUE DATE” on outerside visible place of tank with synthetic enamel white paint (white) over black background complete as directed by Engr-in-charge. Note:- (i) Necessary arrengement shall be made by the contractor for stopping of water coming inside the tank or other bypass arrangement as required at site without any extra cost to the department. (ii) Contractor shall arrange the sufficient manpower and T&P for complete cleaning of the tank within one day only. |
| 62 | Approximate storage capacity of OHT, upto 0.75 Lakh gallons |
| 63 | Approximate storage capacity of OHT, 1.0-1.50 Lakh gallons |
| 64 | Approximate storage capacity of OHT, 2.0-3.0 Lakh gallons |
| 65 | M&L for cleaning of Raw water Intake tank of capacity upto 75,000 Gallons at Old KLP Pump House, Rajcanal Project PH by drain out the muddy water from bottom surfaces of the tank by using engine driven sludge pump and removing the mud any type, soft / loose soil or any residual of alum, scrap etc. manually and depositing out of MD land and cleaning inner surfaces of the tank with the help of wire brushes and uprooting any type of vegitation/ root of tree, plants etc. complete and making good to disturbed surfaces during cleaning and writing date of cleaning with synthetic enamel paint (white colour) on black background on outer surface of the tank and apply one coats of colour cement paint washing on outside surfaces of the tank and white washing on inner surfaces of the tank complete all as specified and directed by Engr-in-charge. Note:- (i) Any damage to the tank during cleaning shall be repaired / rectified by the contractor as per original specification of the tank without extra cost to the department. (ii) Rate includes the cost of complete dewatering and complete removing of silt / loose soil / mud any type. |
| 66 | M&L for cleaning of Raw water Intake tank of capacity upto 50,000 Gallon at KLP Pump House, Birdhwal PH (Approximate size of tank 15 mtr X 15 mtr, 6 mtr deep) by drain out the muddy water from bottom surfaces of the tank by using engine driven sludge pump and removing the mud any type, soft / loose soil or any residual of alum, scrap etc. manually and depositing out of MD land and cleaning inner surfaces of the tank with the help of wire brushes and uprooting any type of vegitation/ root of tree, plants etc. complete and making good to disturbed surfaces during cleaning and writing date of cleaning with synthetic enamel paint (white colour) on black background on outer surface of the tank and apply one coats of colour cement paint washing on outside surfaces of the tank and white washing on inner surfaces of the tank complete all as specified and directed by Engr-in-charge. Note:- (i) Any damage to the tank during cleaning shall be repaired / rectified by the contractor as per original specification of the tank without extra cost to the department. (ii) Rate includes the cost of complete dewatering and complete removing of silt / loose soil / mud any type. |
| 67 | M&L for cleaning of clariflocculator/ clarifier tank of water filteration plant of capacity 1,40,000 Gallon/Hour by drain out the muddy water from bottom surfaces of the tank by using suitable T&P, engine driven sludge pump and removing the residual of alum, sludge, mud, other materails, any type manually and depositing out of MD land and cleaning inside & bottom surfaces of tank including one coat of cement base paint washing on surfaces of wall inside and outside and writing the date of cleaning with synthetic enamel paint (white) on outer surface of the tank (black background) complete all as specified and directed by Engr-in-Charge. |
| 68 | M&L for cleaning of clariflocculator/ clarifier tank of water filteration plant of capacity 80,000 Gallon/Hour by drain out the muddy water from bottom surfaces of the tank by using suitable T&P, engine driven sludge pump and removing the residual of alum, sludge, mud, other materails, any type manually and depositing out of MD land and cleaning inside & bottom surfaces of tank including one coat of cement base paint washing on surfaces of wall inside and outside and writing the date of cleaning with synthetic enamel paint (white) on outer surface of the tank (black background) complete all as specified and directed by Engr-in-Charge. |
| 69 | M&L for cleaning of clariflocculator/ clarifier tank of water filteration plant of capacity 40,000 Gallon/Hour by drain out the muddy water from bottom surfaces of the tank by using suitable T&P, engine driven sludge pump and removing the residual of alum, sludge, mud, other materails, any type manually and depositing out of MD land and cleaning inside & bottom surfaces of tank including one coat of cement base paint washing on surfaces of wall inside and outside and writing the date of cleaning with synthetic enamel paint (white) on outer surface of the tank (black background) complete all as specified and directed by Engr-in-Charge. |
| 70 | M&L for greasing, oiling on moving parts of clariflocculator of water filtration plant 1,40,000 Gallon/Hour and painting with two coat of synthetic enamel weather proof paint after preparation of old surface by removing old paint, scraping the rusted surfaces inclduing on plateform, scrapper structure, electrical panel, motor, garbox, trailing of roller etc complete as per existing colour code complete all as specified and directed by Engr-in-charge. |
| 71 | M&L for greasing, oiling on moving parts of clariflocculator of water filtration plant 80,000 Gallon/Hour and painting with two coat of synthetic enamel weather proof paint after preparation of old surface by removing old paint, scraping the rusted surfaces inclduing on plateform, scrapper structure, electrical panel, motor, garbox, trailing of roller etc complete as per existing colour code complete all as specified and directed by Engr-in-charge. |
| 72 | M&L for greasing, oiling on moving parts of clariflocculator of water filtration plant 40,000 Gallon/Hour and painting with two coat of synthetic enamel weather proof paint after preparation of old surface by removing old paint, scraping the rusted surfaces inclduing on plateform, scrapper structure, electrical panel, motor, garbox, trailing of roller etc complete as per existing colour code complete all as specified and directed by Engr-in-charge. |
| 73 | Taking out the residual of alum, muddy water etc from the bottom of the back wash tank/ sadimentation tank of water filtration plant and depositing the same out of MD land and making good to the damaged portion of water storage tanks as per original specification of the tank and as directed by Engineer-in-charge. Note:- (i) Any damage to the tank shall be rectified by the contractor to the original specification of the tank without any extra cost to the department. (ii) Contractor shall made necessary dead plug / plate to the water pipe inside the tank to prevent any water coming inside the tank without any extra cost to the department. |
| 74 | Draining out the muddy water from the Raw Water Reservoir/ Intake Tank and removing mud, silt and other material from bottom of the tank and depositing to out of MD land and making good to the damaged portion of raw water storage tanks as per original specification of the tank and complete all as specified and directed by Engineer-in-charge. (a) Raj Canal - 01 x 220 LG (b)KLP Pump House- 02 x 110 LG (c) ILP Pump House - 02 x 15 LG and 05 x 08 LG. Note:- (i) Any damage to the tank shall be rectified by the contractor to the original specification of the tank without any extra cost to the department. (ii) Contractor shall made necessary dead plug/ plate to the water pipe inside the tank to prevent any water coming inside the tank without any extra cost to the department. |
| 75 | M&L for cleaning and desilting of raw water RCC channel rectangle shape, max width of channel 1.2 mtr and max depth 1.5 mtr at Rajcanal Pump House, from canal to raw water storage tank, by taking out any type sludge/soil/ any material accumulated at bottom, scrapping / cleaning of bottom and wall including uprooting the roots, vegitation/tree inside and outside upto 2 mtr and removing material to a distance not exc 500 mtr complete all as specified and directed by Engr-in-Charge. |
| 76 | M&L for cleaning and desilting of raw water RCC channel rectangle shape, max width of channel 0.80 mtr and max depth 1.00 mtr at ILP Pump House, from canal to raw water storage tank, by taking out any type sludge/soil/ any material accumulated at bottom, scrapping/ cleaning of bottom and wall including uprooting the roots, vegitation/ tree inside and outside upto 2 mtr and removing material to a distance not exc 500 mtr complete all as specified and directed by Engr-in-Charge. |
| 77 | Cleaning the surrounding area of raw water storage tank, intake tank, underground sump, overhead tank, area inside the perimeter of pump house building by digging out the roots, any type of desert vegitaiion etc with bushes and cutting of bushes of tree and any other unwanted vegetation, grass completely and removing the same out of MD land complete all as specified and directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
