Tender For Short Term Maintenance And Road Property Maintenance From Km 200/000 To 208/700 On Nh-05 In The State Of Himachal Pradesh
Tender Value
55.72 Lakhs
Estimated cost
Bid Submission
05 Feb 2024
0 days left
EMD
1.12 Lakhs
Bank guarantee accepted
Document Fee
15000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
theog → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Short Term Maintenance And Road Property Maintenance From Km 200 / 000 To 208 / 700 On Nh-05 In The State Of Himachal Pradesh
BOQ
| Sl. No. | Item Description |
| 1 | Providing spot reconditioning, reconstruction and regravelling torepair specific erosion or other damages for restoring the eroded area to originally constructed cross section on cuts andfills slopes/ shoulders conformingto TechnicalSpecifications Clause no. 3002. Fill material should be brought from borrow areas located outside ROW conforming to Technical Specification no. 305. Watered and well compacted with plate compactor or power rammer with all leads and lifts as directed by the Engineer (Quantity of compacted Fill material to be measured on cross sectional area basis) |
| 2 | Clearing cleaning, deepening and reshaping of roadside unlined/ kaccha drains and making shallow kaccha lateral drains on shoulders wherever required, including removal and disposal of sediments, extraneousdebris and vegetation growth blocking the free how from site outside ROW with all leads andliftscompletein all respects as directed by the Engineer- In-Charge and as per Maintenance Standard Clause no. 3.1 (Frequency of cleaning in urban areas will be quarterly whereas in rural areas, it will be twice in a year i.e. before and after monsoon). |
| 3 | a) Drains having depth upto0.6 meter ( 2*3740)= 7480 |
| 4 | Clearingroad side/Median open lined/ pucca drains to bring them to original shape, drainage capacity including disposal of sediments, extraneous debris and vegetation groMh blocking the free flow from site outside ROW with all leads and lifts complete in all respects as directed by the Engineer-In-Charge and as per Maintenance Standards Cause no. 3.1(Frequency of cleaning in urban areas will be quarterly whereas in rural areas, it will be twice in a year i.e. before and after monsoon). |
| 5 | a)Drainshavingcross-sectional area upto 0.3 Sqm ( 2*14660 = 29320) |
| 6 | Clearingslab/boxtype culverts and pipe culverts including clearing, cleaning and reshaping of upstream and downstream faces of these culverts within right of way. The job includes disposal of excess material recovered from site including vegetation outside ROW with all leads and lifts complete in all respects as per direction of Engineer-In- Charge and as per Maintenance Standards Clause 3.1 (Frequency of cleaning will be one time in a yeari.e.beforestartof monsoon). |
| 7 | b) Pipe Culverts |
| 8 | Removal of rank vegetation/ weeds and undesirable vegetation from shoulders, embankment slopes upto ROW (both sides) complete in all respects including breaking of clods, rough dressing and disposal of waste material and vegetation at a place outside ROW as per direction of Engineer- In-Charge and as per Maintenance Standards Clause 3.3 (Frequency will be once in a quarter). |
| 9 | a) Shoulders including side slopes of embankment upto toe line on both sides of the carriageway.(Frequency ofcleaning will be four times in a year; however limited to only areas prone to groMh of rank/ undesirable vegetation and weeds). ( 4*81811 = 327244) |
| 10 | Providing and applying low viscosity bitumen emulsion for sealing cracks less then 3 mm wide or incipient fretting or disintegration in an existing bituminous surfacing complete as per MoRTH Specifications Clause 3004.3.2 and as per direction of the Engineer-in- Charge (Fog seal). |
| 11 | Cleaning, removing, clearing of dust and dirt from the existing metal crash barrier ad pedestrian guard rail by washing with water and detergent etc. complete as directed by the Engineer. |
| 12 | Providingtreatmentand repair to pot holes/ ruts and any depth/ patch repair of all types of bitumen pavement complete as per Technical Specification Clause 3004.2 and as per direction of Engineer by using paving grade bitumen/ emulsion/ cold ready mix material. The job includes remoyal of all failed material, trimming of completed excavation to providing firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per Clause no. 503 back filling the patch with bituminous material as per clause no. 509. Compacting trimming and finishing the surface to form a smooth continuous surface all as per Clause no. 3004.2 of Technical Specification. |
| 13 | Providing and laying of hot applied thermoplastic compound 2.50 mm thick i/c reflectorising glass beeds & 250 grams per sqm. Area thickness of 25 mm is exclusive of surface applied glass beeds as per IRC:35. The finished surface to be level uniform and free from streak and hotes complete in all respects i/c carriage of materials and equipment in all leads and lifts with all modes of transportation and as per direction of the Engineer-in-Charge. |
| 14 | White washing with lime two coats on parapet walls, drains, B/walls and bitumen drums etc. including preparation of surface by cleaning scraping etc.including throughly brooming the surface and remove all dirt, dust, mortor dirt and other foreign matter including carriage of materials by mechanical means with in all leads and lifts and as per MORTH Specification and as per direction of the Engineer-in-Charge. |
AI Tender Summary
Tender Timeline
Jan 20, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 05, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 06, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender