Kolkata Municipal Corporation-KMC has published Tender For Restoration The Damaged Air Pollution Control Items At Cossipore Mahasmashan. Submission Date for this Tender is 30-01-2024. Air Pollution Control Tenders in Kolkata West Bengal. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Supply and fixing of tough ...V... belts (Make: FENNER/POWER BOOM / V guard/Benq/ECODRIVE) of the following size:B91 |
2 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 1. M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than 22.5 Kg./m |
3 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 3. Cutting to requisite length or shape departmental R.S. joists,channels, angles, tees, plates etc. (Payment to be made on area of cut surface) |
4 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. B. REPAIRING 2. Welding in M.S. structural work with gas or electric: (b) Continuous weld. |
5 | SECTION 1BUILDING WORKS (K) PAINTING, VERNISHING ETC A. ORIGINAL WORKS 1 (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) |
6 | BUILDING WORKS (K) PAINTING, VERNISHING ETC?(A) ORIGINAL WORKS.(2)(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) |
7 | Supply and fixing of tough ...V... belts (Make: FENNER/POWER BOOM / V guard/Benq/ECODRIVE) of the following size:B92 |
8 | Supply and fixing of tough ...V... belts (Make: FENNER/POWER BOOM / V guard/Benq/ECODRIVE) of the following size:B94 |
9 | Supply and fixing of tough ...V... belts (Make: FENNER/POWER BOOM / V guard/Benq/ECODRIVE) of the following size:B98 |
10 | Manufacture, supply and erection of M.S chassis made from 150mm x 75mm x 8 mm channel as per dimension of I.D fan and motor sets complete fabrication, welding ,grinding drill holes for fixing motor blower set as per direction of Engineer-In-Charge |
11 | Supply and fixing the mess of main pipe and branch pipe of I.D 40m.m. and 25.4 mm respectively to be welded horizontally 8 nos at both side of main pipe as per overall dimension inside of pre-color (1800 mm / 1200 mm) having tapped whole suitable to thread of S.S/Brass nozzle to be 24 nos in one stage of both side made from S.S 304 medium gauge pipe. |
12 | Supply and fixing the water injection nozzle in form of cork screw or like end auger of dimension 80 mm height x 25.4 mm dia hexagonal tapered having thread at one side with 4mm dia drill hole centrally in which water may be spared wildly spirally like fly wheel at a normal pressure of water complete machining and testing. |
13 | BUILDING WORKS ( C ) Brickworks,Concrete Works etc.39...Extra for high scaffolding in water tank for repairing, painting etc.NOTE : Height of the bottom of the tank not less than 15 mtrs. |
14 | S/F 230V, LED indicating lamp, (Blue & White) |
15 | S/F 230V, LED indicating lamp, (other colurs) |
16 | PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 20. Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63] A. 6 Kg / Sq.Cm. (Working Pressure) (Dia) (b) 50 mm |
17 | Supply and delivery of 230V,50Hz Heavy duty Metal 12"exhuast fan. |
18 | Sub Total |
19 | GST 18% |
20 | CESS 1% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail