Tender For Construction Of Aduthila West Anganwadi, Kannur-Kerala

Tender For Construction Of Aduthila West Anganwadi, 1 Supply Of Materials 2 Stone For Masonry Work 3 Through And Bond Stone Size 24X24x39 Cm 4 Portland Cement 5 Coarse Sand ( Zone Iii ) 6 Stone Aggregate ( Single Size ) ; 20 Mm Nominal Size 7 Stone Aggregate ( Single Size ) ; 10 Mm Nominal Size 8 Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper 9 Vibrator ( Needle Type 40Mm ) 10 Twisted Steel / Deformed Bars 11 Laterite Stone Of Size 35X20x20 Cm 12 Structural Steel Such As Tees , Angles, Channels And R.S Joists 13 Red Oxide Zinc Chromate Primer 14 Adjustable Span Eso+Si ( 2035-3.40 ) 15 Adjustable Telescopic Prop 3M ( 2.02-3.75M ) 16 Beam Clamp 300-380 Mm ( 450-1070Mm ) 17 Second Class Kail Wood In Planks 18 Second Class Kail Wood In Scantling 19 Hollock Ballies 125 Mm Diameter 20 Stone Aggregate ( Single Size ) : 40Mm Nominal Size 21 Mild Steel Round Bar Above 12 Mm Dia 22 Flats Up To 10 Mm In Thickness 23 Rawl Plug 50Mm ( Designation 10 Nos ) 24 Anjili Wood Scants 25 Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x1.90 Mm 26 Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x1.50Mm 27 Bright Finished Or Black Enameled Mild Steel Screws 40 Mm 28 Bright Finished Or Black Enameled Mild Steel Screws 20 Mm 29 Anjili Wood Planks 30 Float Glass Sheet Of Nominal Thickness 4 Mm ( Weight Not Less Than 10 Kg / Sqm ) 31 50 Mm X42 Mmx2 Mm Thick Factory Made Door Frame Of Pvc Extruded Sections In White , Grey Or Wooden Finish 32 24 Mm Thick Factory Madeshutters With Styles , Rails And Panels Of Pvc Extruded Sections In White, Grey Or Wooden Finish 33 Fine Sand ( Zone Iv ) 34 Ceramic Glazed Tiles1st Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Exceptburgundy , Green Black 35 Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Oridnary Cement 36 Vitrified Floor Tile 50X50 Cm 37 Synthetic Enamel Paint In Black Or Choclate Shade 38 Special Primer ( C W ) 39 Multi Surface Paint 40 Water Thinnable Cement Primer For Interior Wall Surface , Having Voc Content Less Than 50 Gms / Litre 41 Plastic Emulsion Paint 42 Vitreous China Orrisa Type W.C Pan Size 580 Mm 43 Flushing Cistern P.V.C 10 Its Capacity ( Low Level ) ( White ) ( With Fittings, Accessories And Flush Pipe ) 44 100 Mm S.C.I Trap With Vent Heel 45 Black Plastic Seat ( Solid ) With Lid C.P Brass Hinges And Rubber Buffers 46 Vitreous China Pedestal Type Wate Closet 47 Vitreous China Flat Back Wash Basin 550X400 Mm 48 15 Mm C.P Brass Waste 32 Mm 49 C.I Bracket For Wash Bas In And Sinks 50 Stainles Steel Kitchen Sink- Without Drain Board 470X420x Mm Bowl Depth 178 Mm 51 Brass Bib-Cock-15 Mm Dia 52 Brass Full Way Valve With C.I Wheel ( Screwed End ) 25 Mm Dia 53 P V C Pipe 110 Mm Outer Dia 6 Kgf / Cm2 54 P V Cpipe 32 Mm Outer Dia .10 Kgf / Cm2 55 P V Celbow 110 Mm Dia 56 P V C Bend 110 Mm Dia 57 P V Cpipe 25 Mm Outer Dia 10 Kgf / Cm2 58 P V Cpipe50 Mm Outer Dia .6 Kgf / Cm2 59 Polythylene Water Storage Tank With Cover And Suitable Locking Arrangement 60 Stainless Steel ( Grade -304 ) Hollow Section Round / Square Tubes 61 Sundries 62 Stainless Steel Bolts / Square Bar And Plates

INR 1950 /-

INR 22110.0 /-

INR 8.84 Lakhs /-

Name of Work:Contruction of aduthila west anganwadi

Sl. No.	Item Description
1	Supply of materials
2	Stone for masonry work
3	Through and bond stone size 24x24x39 cm
4	Portland Cement
5	Coarse sand (zone III)
6	Stone aggregate (single size); 20 mm nominal size
7	Stone aggregate (single size); 10 mm nominal size
8	Hire charges of concrete Mixer 0.25 to 0.40 cum with Hopper
9	Vibrator (Needle type 40mm)
10	Twisted steel /deformed bars
11	Laterite stone of size 35x20x20 cm
12	Structural steel such as tees ,angles,channels and R.S Joists
13	Red oxide Zinc chromate primer
14	Adjustable span ESO+SI(2035-3.40)
15	Adjustable telescopic prop 3m(2.02-3.75m)
16	Beam clamp 300-380 mm(450-1070mm)
17	Second class kail wood in planks
18	Second class kail wood in scantling
19	Hollock ballies 125 mm diameter
20	Stone aggregate (single size): 40mm nominal size
21	Mild steel round bar above 12 mm dia
22	Flats up to 10 mm in thickness
23	Rawl plug 50mm (designation 10 nos)
24	Anjili wood scants
25	Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
26	Bright finished or black enameled mild steel butt hinges 50x37x1.50mm
27	Bright finished or black enameled mild steel screws 40 mm
28	Bright finished or black enameled mild steel screws 20 mm
29	Anjili wood planks
30	Float glass sheet of nominal thickness 4 mm(weight not less than 10 kg/sqm)
31	50 mm x42 mmx2 mm thick Factory made door frame of PVC extruded sections in white ,grey or wooden finish
32	24 mm thick factory madeshutters with styles ,rails and panels of PVC extruded sections in white,grey or wooden finish
33	Fine sand (Zone IV)
34	Ceramic Glazed Tiles1st quality minimum thickness 5 mm in all colours shades and designs exceptburgundy ,green black
35	precast chequered cement tiles 22 mm thick Dark shade using oridnary cement
36	Vitrified floor tile 50x50 cm
37	Synthetic enamel paint in black or choclate shade
38	SPECIAL PRIMER ( C W)
39	Multi surface paint
40	Water thinnable cement primer for interior wall surface ,having VOC content less than 50 gms/litre
41	Plastic emulsion paint
42	Vitreous China orrisa type W.C pan size 580 mm
43	Flushing cistern P.V.C 10 its capacity (low level) (white) (with fittings,accessories and flush pipe)
44	100 mm S.C.I trap with vent heel
45	Black plastic seat (solid) with lid C.P brass hinges and rubber buffers
46	Vitreous china pedestal type wate closet
47	Vitreous china flat back wash basin 550x400 mm
48	15 mm C.P brass waste 32 mm
49	C.I bracket for wash bas in and sinks
50	Stainles steel kitchen sink- without drain board 470x420x mm bowl depth 178 mm
51	Brass bib-cock-15 mm dia
52	Brass full way valve with C.I wheel (screwed end)25 mm dia
53	P V C pipe 110 mm outer dia 6 kgf/cm2
54	P V Cpipe 32 mm outer dia .10 kgf/cm2
55	P V CElbow 110 mm dia
56	P V C bend 110 mm dia
57	P V Cpipe 25 mm outer dia 10 kgf/cm2
58	P V Cpipe50 mm outer dia .6 kgf/cm2
59	Polythylene water storage tank with cover and suitable locking arrangement
60	Stainless steel (Grade -304) hollow section round /square tubes
61	Sundries
62	Stainless steel bolts /square bar and plates