Military Engineer Services-MES has published Tender For Additional/Alternator To Toilet And Entrance In Samman Complex Of Hq Wc Chandimandir.. Submission Date for this Tender is 26-02-2024. Toilet Bathroom Tenders in chandimandir Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-Jan-2024 | Revised date | Date | 14-02-2024 |
| 2 | 06-Feb-2024 | Date corrigendum | Date | 19-02-2024 |
| 3 | 07-Feb-2024 | Revised Page | Other | 19-02-2024 |
| 4 | 07-Feb-2024 | Revised BoQ | BOQ | 19-02-2024 |
| 5 | 19-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-02-2024 |
| Sl. No. | Item Description |
| 1 | Disconnecting existing tanks exc 500 and n.exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately) complete all as specified & directed by Engineer-in-charge. |
| 2 | Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement or any mortar complete all as specified & directed. |
| 3 | Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed. |
| 4 | PCC 1:3:6 type C-1 (using 20m graded crushed stone aggregate) as in roof padding, sub base, finished fair and even without using extra cement, complete all as specified and directed. |
| 5 | Rendering 15mm thick (average thickness) plaster in cement mortar 1:4 mixed with WPCon concrete roof/ wallsurfaces including flashings and junction of parapets etc ,finishing the surface even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only). |
| 6 | 40mm thick brick tiles (laid on and including 15mm thick screed bed in cement mortar 1: 6) ,joints grouted flush in cement mortar (1 : 3) mixed with 5% of crude oil by weight of cement, complete all as specified and as directed. |
| 7 | All as per serial item No 6 herein before but except tiles –ditto- |
| 8 | 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm andreinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructionsincluding dismantling of existing felt /treatment, complete all as specified & directed. |
| 9 | Taking down old steel tubing & connection including cleaning, refixing of old steel tubing and connection in new or old position (wall, ceiling, floors etc) for 20mmbore pipe complete all as specified and directed. |
| 10 | Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed. |
| 11 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 12 | Preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed. |
| 13 | Supply only Integral waterproofing compound, all as specified. |
| 14 | Demolition of reinforced cement concrete in roofs, floors (other than ground floor), beams, staircase, landing, chajjas, shelves and similar suspended work, including cutting of reinforcement to facilitate demolition and removal of debris , complete all as specified and directed. |
| 15 | Reinforced cement concrete, 1:2:4(nominal mix, type B-1, using 20mm graded crushed stone aggregate) as in chajja etc, shelves and the like complete, all as specified and directed. |
| 16 | Form work to chullah hoods, chajjas and similar items including edges / sides and soffits of lintelsetcrough finished surface of concrete flat complete all as specified and directed. |
| 17 | Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete, all as specified and directed. |
| 18 | Rendering 15mm thickon fair faces of brick worksurfaces, finished even and fairin cement mortar (1:4), inclunding using water proofing compound, complete all as specified. Note : WPC shall be measured and paid separately. |
| 19 | Rendering 10mm thick in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 20 | 5mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | Preparation of new surfacs and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. |
| 22 | Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper overand including a coat of primer complete all as specified and directed. |
| 23 | Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper overand including a coat of primer complete all as specified and directed. |
| 24 | Excavation in post holes (or similar hole) each in hard and dense soil n.exc 0.50 cu m getting out and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed. |
| 25 | Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete, all as specified & directed. |
| 26 | Pre-painted galvalume aluminium zinc coating AZ-70 GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge. |
| 27 | Pre-painted galvalume aluminum zinc AZ-70 coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing(length and girthas fixed), fixed with self tapping screws complete all as specified & directed by Engineer-in-charge. |
| 28 | Poly carbonate coloured sheets as approved, 6mm thick as in roofs as in dome shape, circular / semi circular / arch type shape upto 12 mtr height including self tapping screws / form work / scafolding if required at site to complete the work including adequate size steel screws, washers, nuts, rubber strips/ rubber beading, silicon etc to fill up exisig holes etc aluminium strip/ flat etc as per manufacturer’s instructions,complete all as specified and directed. |
| 29 | Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 , complete all as specified & directed by Engineer-in-Charge. |
| 30 | Preparation of new or previously untreatedsteel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide, complete all as specified and directed. |
| 31 | Demolition of plain cement concretein ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed. |
| 32 | Kota Stone Slab flooring, 16-18mm thick, best quality over and including cement screed bed 15mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including cutting, rubbing, grinding and polishing (Mirror finish) complete all as specified and directed. |
| 33 | All as per serial item No 32 hereinbefore but on skirting / vertical surfaces laid over and including 10mm screed layer in cement mortar 1:3, cutting, rubbing, grinding and polishing complete, all as specified. |
| 34 | Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed. |
| 35 | 50mm thick PCC 1:4:8 type D-2 (using 40m graded crushed stone aggregate) as in sub base flooring, finished even ,all as specified and directed. |
| 36 | Precast concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning,complete all as specified and directed |
| 37 | Dismantling ofwall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified & directed by Engineer-in-charge. |
| 38 | 6mm thick Non asbestos fibre cement building boards fixed in ceiling flat or sloping inserted to timber/GI/Aluminium framework with screws, anodised aluminium snap gridof size 605 x605 mm frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 39 | Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications , all as directed. |
| 40 | PVC sheet fillet 35mm wide, 5mm thick for wall paneling, complete all as specified and directed. |
| 41 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 42 | Coloured vitrified ceramic tiles dark shade 10mm thick (square / rectangular) polished, area of each tiles exc 0.18 Sqm but n.exc 0.38 sqm, on vertical surfaces as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed. |
| 43 | Granite (of any type) tiles 20mm thick, as in flooringmachine cut, bedded and jointed with grey cement slurry and pointed with white cement match the shade of granite stone including grinding and polishing over and including screed bed 15mm thick in cement mortar 1:6and rounding off/bull nosing exposed edgescomplete all as specified and directed. |
| 44 | All as serial item No 43 herein before but on skirting etc over and including 15mm thick rendering in cement mortar 1:4 –ditto- |
| 45 | Complete removal of existing treatment by using of wire brush /mechanical grinder including washing rubbing down and stopping of distempered or painted surface and applying wall care putty of 2 to 3 mm thick over and including a coat of wall primer, smoothening the surfaces with sand papers etc. and applying two coats of oil bound distemper on wall surfacecomplete all as specified and directed. |
| 46 | Complete removal of existing treatment by using of wire brush /mechanical grinder including washing rubbing down and stopping of distempered or painted surface and applying wall care putty of 2 to 3 mm thick over and including a coat of wall primer, smoothening the surfaces with sand papers etc. and applying two coats of oil bound distemper on ceiling surfacecomplete all as specified and directed. |
| 47 | Two coats of white washing on old ceiling surfaces including preparation ofceling surfaces complete all as specified and directed. |
| 48 | Taking down chowkhats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge. |
| 49 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm and removing to store complete all as specified and directed. |
| 50 | 15mm thick tinted and toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes, all as specified and directed. |
| 51 | Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed. |
| 52 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 53 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. |
| 54 | 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed for PVC door, type B-21 complete all as specified and directed. |
| 55 | 150 mm size aluminium, barrel tower bolt of extruded section and fixed for PVC door complete all as specified and directed. |
| 56 | 150 mm aluminium handles fabricated typecomplete all as specified and directed. |
| 57 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and directed. |
| 58 | Supply only 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading )in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 59 | Supply only 3mm thick aluminium composite panel sheet (ACP) of colour as approved by Engr In Charge, all as specified and directed. |
| 60 | Aluminium (extruded section body) door closer hydraulically regulated designation No. 3, universal type, suitable for door shutter of 701mm to 850mm in width and of weight between 36 to 60 Kg complete, fixed in repairs, all as specified & directed by Engineer-in-charge. |
| 61 | Cutting opening through brick wall built in cement mortar for doors, windows, and other openings or enlarging existing openings, converting window to door opening etc removing and rubbish n.exc 50 metre and making goodcomplete all as specified and directed. |
| 62 | Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 63 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth Complete all as specified and directed . |
| 64 | Non skid ceramic coloured tiles7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:6, complete all as specified and directed. |
| 65 | Glazed ceramic coloured tiles of size 300mmx450mmx 7mm thick as in dado, set and jointed in neat cement slurry and grouted in white cement complete as on vertical surfaces over and including 10mm thick bedding layer in CM 1:4complete all as specified and directed. |
| 66 | 16 mm (outer dia) CPVC pipes,SDR 11 and Plain CPVC SDR 11 fittings, fixed on walls/ceiling or laying in floors,complete all as specified. |
| 67 | 20 mm (outer dia) CPVC pipes,SDR 11 and Plain CPVC SDR 11 fittings, fixed on walls/ceiling or laying in floors,complete all as specified. |
| 68 | Brass Elbow16 mm for CPVC Pipe, all as specified. |
| 69 | Brass Elbow20 mm for CPVC Pipe, all as specified. |
| 70 | Brass Tee 16 mm diaUPVC pipe,, all as specified. |
| 71 | Brass Tee 20 mm diaUPVC pipe, all as specified. |
| 72 | Male Brass Threaded Adaptor16 mm dia (MTA/ MBTA) for CPVC pipe, all as specified. |
| 73 | Male Brass Threaded Adaptor20 mm dia (MTA/ MBTA) for CPVC pipe, all as specified. |
| 74 | Male Brass Threaded Adaptor50 mm dia (MTA/ MBTA) for CPVC pipe, all as specified. |
| 75 | Female Brass Threaded 16 mm dia Adaptor (FTA/ FBTA) for CPVC Pipe, all as specified. |
| 76 | Female Brass threaded 20 mm dia adaptor (FTA/ FBTA) for CPVC Pipe, all as specified. |
| 77 | PVC(SWR) waste pipe, 110mm bore, single socketed in any length with cement/ rubber ring joints, laid in trenches or infloor,complete all as specified and directed. |
| 78 | PVC(SWR) waste pipe, 75mm bore, single socketed in any length with cement/ rubber ring joints, laid in trenches or infloor,complete all as specified and directed. |
| 79 | 110 mm bore PVC (SWR) bends of any radius complete, all as specified and directed. |
| 80 | 75 mm bore PVC (SWR) bends of any radius with oval acess door complete, all as specified and directed. |
| 81 | 110 mm dia PVC (SWR) vent cowl any radiuscomplete all as specified and directed. |
| 82 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed |
| 83 | 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 15mm borePTMT, complete all as specified and directed. |
| 84 | Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. |
| 85 | PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC long bend for squat pattern WC , set with concrete and making good to floor,complete all as specified & directed. |
| 86 | Vitreous China half stall urinal, fixed against wall in cement mortar (1:2),securing urinal with and including 60mm long brass screws, pointing around urinal back in cement, including CP waste coupling, 32mm PVC waste pipe, complete all as specified and directed. |
| 87 | Vitreous china urinal partition of size 310mm x 710mmterminating about 40cm above floor line complete all as specified and directed. |
| 88 | Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified & directed. |
| 89 | Hand shower (health faucet), chromium platedfor 15mm bore with fittings and 1 metre long flexible tube and wall hook,complete all as specified and directed. |
| 90 | Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 105gms) complete all as specified & directed. |
| 91 | Towel ring ofPTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms),complete all as specified and directed. |
| 92 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with CP bracket guard and railing 60cm long,complete all as specified and directed. |
| 93 | Toilet paper holder, cast copper alloy, chromium plated,fixed in position in repairs, complete all as specified and directed. |
| 94 | Bevelled edge mirror size 600mm x 450 mm, 5mm thick of selected quality glass mounded on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washer with aluminium channel of suitable section alround , complete all as specified & directed. |
| 95 | PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed. |
| 96 | 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement,complete all as specified & directed. |
| 97 | Vitreous Cliina wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 98 | Brass chromium plated bottle traps 40mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed. |
| 99 | Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work, vertical or to batter to give rough finish to flat surfaces complete all as specified and directed. |
| 100 | Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for roughly finished flat surfaces of concrete, all as specified. |
| 101 | Form work to sides of pillars, coloumns and similar items (square, rectangular or polygonal) including edges rough finished surface of concrete flat complete all as specified and directed. |
| 102 | Form work to soffits of suspended slabs such as roof slabs rough finished surface of concrete flat not exc 200mm thick complete all as specified and directed. |
| 103 | Reinforced cement concrete,type A-1, 1:1½:3(nominal mix, using 20mm graded crushed stone aggregate)as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under-reamed piles and mass concrete and the like complete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 104 | Reinforced cement concrete,type A-1, 1:1½:3(nominal mix, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, balconies, roofs, canopies shelves and the likecomplete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 105 | Reinforced cement concrete,type A-1, 1:1½:3(nominal mix, using 20mm graded crushed stone aggregate) as in beams, lintels over 1.5 metre span and the like complete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 106 | Reinforced cement concrete,type A-1, 1:1½:3(nominal mix, using 20mm graded crushed stone aggregate)as in chajja and the like, complete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 107 | Reinforced cement concrete,type A-1, 1:1½:3(nominal mix, using 20mm graded crushed stone aggregate)as in coloumns, pillars etc complete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 108 | Material and labour for mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge. |
| 109 | Material and labour for mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified. |
| 110 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard and dense soilall as specified & directed by Engineer-in-Charge. |
| 111 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified. |
| 112 | Removal excavated soil to a distance exc 250 but n.exc 500m and depositingwhere directed at a level not exceeding 1.5 mabove the starting point complete all as specified & directed by Engineer-in-Charge. |
| 113 | Precast reinforced cement concretetype B-1, 1;2:4 using 20mm gradedcrushed stone aggregate as in man hole cover slab set in cement mortar 1:4 complete all as specified and directed. |
| 114 | RCC pipes class NP-2600mm dia bore, with collars, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade,complete all as specified and directed (excavation, earthworkand PCC shall be measured and paid for separately) |
| 115 | Plain cement concrete 1:3:6 type C-2, using 40mm graded crushed stone aggregate as in packing under and haunching against the sides of pipes (150mm bore pipe) after the pipe are laid and tested including making good and preparing the bedding to receive new pipecomplete all as specified and directed. |
| 116 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in plain cement concrete 1:2:4 type B1 smooth finished,and reforming benching as required,internal dia of pipe 150mm all as specified and directed. |
| 117 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified & directed by Engineer-in-charge. |
| 118 | 0.56 mm thick plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed |
| 119 | PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in surface channels or drains and benching including finishing surface of channels & the top of benching even & smooth using extra cement all as specified. |
| 120 | Material and labour forpoint wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single coremulti stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising ofOne light /bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator, complete all as specified and directed. |
| 121 | All as per serial item 120 herein before but for socket outlet 3 pin 6 Amps on same board complete all as specified and directed |
| 122 | All as per serial item 120 herein before but for socket outlet 3 pin 6 Amps on independentboard complete all as specified and directed |
| 123 | All as per serial item 120 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSHcable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor |
| 124 | Switch modular type (ISI marked), single pole, one way 6 Amps, one module(ISI marked), complete all as specified & directed. |
| 125 | Switch modular type (ISI marked), single pole, one way 16 Amps, one module(ISI marked), complete all as specified & directed. |
| 126 | Socket shutters outlet 2/3 pin 6 Amp modular type multi purpose combined two module (ISI marked), complete all as specified & directed. |
| 127 | Socket shutters outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed. |
| 128 | Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specifiedand directed by Engineer-in-charge. |
| 129 | Modular switch type stepped fan regulator, single pole, 230 volt two module complete all as specified and directed. |
| 130 | Lamp holder, PVC/Polycarbonate type with back plate angular type fixed on wall suitable for batten fitting ,complete all as specified and directed. |
| 131 | LED lamp9 watts, B-22 (inverter bulb)type complete all as specified. |
| 132 | MCB DB, IP 43 protection, powder coated double door with locking arrangement suitable for surface and flush mounting, 08 way SPN with 200 Amps busbar 240V completed all as specified and directed. |
| 133 | Sheet metal enclosure for DB, flush mountedsingle door suitable for 2 way SPNwithout busbar 240V completed all as specified and directed. |
| 134 | MCB, SPN , 240 volt,40 to 63Amps, 10 KA , "C" series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 135 | MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , "C" series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 136 | LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 137 | Slim LED lights fitting, 4 feet,1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and directed. |
| 138 | Slim LED lights fitting, 2 feet,1x 10W, inverter rechargeable,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 139 | Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed. |
| 140 | Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) compelte all as specified and directed. |
| 141 | Wall mounted type automatic sanitary napkin destroyer incinerator machine 230 volt of capacity 8 to 10 Napkins per load , of size 230 x 230x 320mm for ladies toilet complete all as specified and directed. MAKE : NAKSHATRA, Model Blue or equivalent as approved by Engineer-in-Charge. |
| 142 | Sub main wiring with two singlecore FRLSH PVC insulated and unsheathed cable with copper conductor of size 4 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 4 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through and includingPVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfacesby providing by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. Note: - (i)For the purpose of measurement, 2 single core of 4 sqmm and one single core earth cable of 4 sqmm cableshall be considered as 1 running metre. (ii) colour code shall be Red for phase, Black for neutral and green for earth |
| 143 | Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mmburried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe of20mm dia, GI light grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of presast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Sch Part-I (2009), complete including dismantling of old earthing, all as specified and directed. Note(s) :- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm. (ii)Earth resistance should be less than 3 Ohm. In case the test results are not found below 3 Ohm, complete earthing will be redone without any extra cost to Govt. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
