}

Tender For Special Repairs To Esi Hospital Mg Kavu, Thrissur., mulamkunnathukavu-Kerala

Employees State Insurance Corporation-ESIC has published Tender For Special Repairs To Esi Hospital Mg Kavu, Thrissur.. Submission Date for this Tender is 31-01-2024. Water Pipe Line Tenders in mulamkunnathukavu Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

41731938
Tender For Special Repairs To Esi Hospital Mg Kavu, Thrissur.
Open Tender
Indian
Kerala
mulamkunnathukavu
31-01-2024

Tender Details

Special Repairs To Esi Hospital Mg Kavu, Thrissur. Special Repairs To Esi Hospital Mulamkunnathukau, Thrissur. Sh Providing And Laying Of Cpvc Water Supply Line, Construction Of 50, 000 Liters Capacity Rcc Water Tank And Boundary Wall And Painting Of Existing Boundary Wall.

Key Value

Document Fees
Refer document
EMD
INR 49598.0 /-
Tender Value
INR 24.79 Lakhs /-

BOQ Items

Name of Work: Special repairs to ESI Hospital Mulamkunnathukavu, Thrissur. SH: Providing and Laying of CPVC water supply line,construction of 50,000 Liters capacity RCC water tank & boundary wall and painting of existing boundary wall.
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m, as directed by Engineer-in-Charge.
2All kinds of soil
3Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
4All kinds of soil
5Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
6All kinds of soil.
7Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
81:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
91:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
10Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer"s specification.
11Centering and shuttering including strutting, propping etc. and removal of form for all heights:
12Foundations, footings, bases of columns, etc. for mass concrete.
13Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
14Suspended floors, roofs, landings, balconies and access platform.
15Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
16Thermo-Mechanically Treated bars of grade Fe-500 D or more.
17Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
18Cement mortar 1:6 (1 cement : 6 coarse sand)
19Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) :
20With F.P.S.(non modular) bricks
21Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
2212 mm cement plaster of mix :
231:4 (1 cement: 4 fine sand)
2415 mm cement plaster on rough side of single or half brick wall of Mix:
251:4 (1 cement: 4 fine sand)
2612 mm cement plaster finished with a floating coat of neat cement of mix :
271:4 (1 cement: 4 fine sand)
28Finishing walls with Acrylic Smooth exterior paint of required shade :
29New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
30Painting with synthetic enamel paint of approved brand and Manufacture to give an even shade :
31Two or more coats on new work
32Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
33Finishing walls with Acrylic Smooth exterior paint of required shade :
34Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing surface
35Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
36In cement mortar
37Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
38With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
39Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
4050 mm nominal outer dia Pipes.
4180 mm nominal dia Pipes
42Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
4350 mm nominal bore
44Providing and fixing gun metal non- return valve of approved quality (screwed end) :
4550 mm nominal bore : Horizontal
46Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
47L D- 2.5, Rectangular shape 600x450 mm internal Dimensions
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail