Tender For Supply, Installation And Commissioning Of 11_0.433 Kv 200 Kva Power Distribution Transformer And Other Allied Accessories, ranchi-Jharkhand

Supply, Installation And Commissioning Of 11_0.433 Kv 200 Kva Power Distribution Transformer And Other Allied Accessories , Quotation 200 Kva Power Distribution Transformer , Supplying, Installation, Testing & Commissioning Of Outdoor Type 200 Kva 11/0.433 Kva Copper Wound Distribution Transformer With Offload Tap Changer-12.5% To + 2.5% In Step Of 2.5%, Continuously Rated For 3Phase, 50 Hz, Full Load And Temperature Rise Not Exceeding 45ºc By Thermometer In Oil And 50 ºc By The Resistance In Winding After Continuous Run At Full Load Rating, The Transformer Should Have Oil Immersed Winding Having Vector Group Of Dy11, Ht Side Connect In Delta & Lt Side Connect In Star With Neutral Brought Out Connected To Provide Separate Earthing.The Transformer Should Have Power Terminal Bushing Arrangement On Ht Side & Cable Box In Lt Side. 2 Nos. Channels With Stoppers Shall Be Provided And Fixed On The Provided Plinth For Mounting The Transformer With First Filling Of Transformer Oil With All Accessories. Transformer Shall Be Latest Manufacturing Standards As Per Amended Is Specification And The Load & No Losses Shall Be Limited To The Values Given Or As Per Is Or Norms Issued By Jseb Which Are Below- A) Oil Conservator With Filling Hole With Cap And Plain Oil Level Gauge. (B) Silica Gel Dehydrating Breather Charged With Silica Gel. (C) Oil Drain Valve. (D) Oil Filter Valve. (E) Lifting Eyes/Hooks. (F) Two Earthing Terminals. (G) Diagram And Rating Plate. (H) Air Vent. (I) Explosion Vent. (J)100 Mm Dia. Thermometer With Thermometer Pocket. (H) Four Bi-Directional Plain Roller. Etc. All Complete With All Materials. Make Servocon./ Synergy/ Kirlosker/ Bhel/Siemens. , Electric Sub-Station – Cost Of Construction Of Dp Structure For Transformer, Supplying And Erecting Steel I Section Pole, Top Bracket Channel, Back Clamp, 11 Kv Disc Insulator With Hardware, Ms Nut And Bolt, Ms Angle, Gi Wire, Clamp For Transformer Base, Top Channel,D.O Fuse Angle , Outdoor Type Horn Gap Type Fuse With Insulator, Ab Switch Of 400 A Rotating Type Etc. All Complete As Per The Site Requirement And As Per The Direction Of E/I (All Complete Set) , Supply And Fitting Of Thyrite Type Lightening Arrestor Suitable For 11Kv Supply Line With Ancillary Material Complete On Crossed Arms And Connected To Overhead Line. , Cost Towards Doing Cable Socketing With Lugs Of 185 Sq. Mm Aluminum Socket , Supplying All Materials Labour, Tools And Tackles For Making Chemical Earthing Station With Electrode And Earth Fill Compound ( Bfc) Etc. All Complete As Per Ie Rule.

Refer document

Refer document