Military Engineer Services-MES has published Tender For Rep Maintenance Of External Water Supply Ci Gi Pipelines Connected Fittings Fixtures Filtration Plant Water Supply Inst Pump Sets Borewell And Repair Maintenance Of Water Distribution Pipeline And Connected Works At Si Lines Under Ge Bhopal.. Submission Date for this Tender is 13-02-2024. GI Pipe Tenders in bhopal Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-02-2024 |
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc or for manholes,laying of pipe lines, cables, pipes etc in hard/dense soil and getting out complete all as specified and dircted. |
| 3 | Add to item No. 1.00 here in before for each additional 1.5m or part thereof in depth beyond the first 1.5 m for foundation etc or for manholes,laying of pipe lines, cables, pipes etc in hard/dense soil and getting out complete all as specified and dircted. |
| 4 | Returning filling in, including spreading, leveling watering and well rammng in layers not exc 25 cm thick complete all as specified and directed. |
| 5 | Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and diected. |
| 6 | Taking out existing CI/DI pipe line, of any class including CI fitting with spigot and socket ends and lead joint including burning out lead joints and recovering out lead for re-use and depositing to store yard complete all as specified and directed of follwing sizes:- |
| 7 | (a) 80mm bore |
| 8 | (b) 100 mmbore |
| 9 | (c )150 mm bore |
| 10 | Relaying of CI pipe including fittings with spigot and socketed end/ flanged end, centrifugally cast laid in trenches after cleaning internally and externally, drawing out all foreign material/rust complete all as specified and directedof following sizes :- Note :- Earth work, joints and fittings of the pipes shall be measured and paid separately under appropriate item of Schedule "A". |
| 11 | (a) 80 mm bore |
| 12 | (b)100 mmbore |
| 13 | (c)150 mm bore |
| 14 | Supply, laying and jointing of DI pipes S/S class K 9 of standard length, internal cement mortar coating an external surface with bituminious paint of the following sizes ISI marked including nuts, bolts, packing material etc. and making the joint leak proof complete all as specified and directed. Make: Tata/ Jindal/ Electrosteel Note: Earth work, joints and fittings of the pipes shall be measured and paid for separately under appropriate items of Schedule "A". |
| 15 | (a) 100 mmbore |
| 16 | (b )150 mm bore |
| 17 | (c) 250 mm bore |
| 18 | S&F of push-on flexible rubber gasket (tyton) joint suitable for following sizes :- |
| 19 | (a)80 mm bore |
| 20 | (b)100 mm bore |
| 21 | (c)150 mm bore |
| 22 | Cutting of cast iron pipes in position for insertion of new tees, branches, etc (two cuts) complete all as specified and directed for the following sizes:- |
| 23 | (a) 80 mm bore |
| 24 | (b)100 mmbore |
| 25 | (c )150 mm bore |
| 26 | S&F for CI/DIfittings i.e bend (any type, radius and angle), tapers any type, (straight bend including decreasing or double socket etc), tee pieces single branch,"Y" junction, (all sockets or socket and spigot or flanged) collars, caps and plugs for spigot socketed pipes upto 150 mm bore complete all as specified and directed. Make:LNT/ Necco/ Kajeriwal/ Kesin |
| 27 | S&F for rubber gasket joint for spigot and socketed end CI pipe & fittings complete all as specified and directed for following size of pipes:- |
| 28 | (a)80 mm bore |
| 29 | (b) 100 mm bore |
| 30 | (c )150mm bore |
| 31 | M&L for run lead joint for spigot and socketed end CI pipe & fittings complete all as specified and directed for following size of pipes:- |
| 32 | (a)80 mm bore |
| 33 | (b) 100 mm bore |
| 34 | (c )150 mm bore |
| 35 | (d )250 mm bore |
| 36 | Labour only for cocking of run lead joint for spigot and socketed pipes and fittings complete all as specified and directed of following size of pipes:- |
| 37 | (a)80 mm bore |
| 38 | (b) 100 mm bore |
| 39 | (c )150 mm bore |
| 40 | (d )250 mm bore |
| 41 | M&L for making joints with rubber or fibre board gasket in flanged joint including bolts, nuts, washers and white lead complete all as specified and directed for the following size of pipes:- |
| 42 | (a) 80 mm bore |
| 43 | (b)100 mmbore |
| 44 | (c )150 mm bore |
| 45 | Taking out sluice valve top cover, repairing of unserviceable spindle and check nut by grinding, machining and putting extra material including its lathe work and refixing of sluice valve parts after servicing and replacment of gland packing, rubber sheet, nuts, bolts, washers etc as required for smooth functioning complete all as specified and directed of following size of pipes:- |
| 46 | (a) 80 mm bore |
| 47 | (b) 100 mm bore |
| 48 | (c )150 mm bore |
| 49 | (d) 250 mm bore |
| 50 | S&F in replacement cast iron flanged sluice valve of class PN-1, long body, ISI marked, conforming to IS-14846 with stainless steel spindle and hand wheel including nuts, bolts, rubber gaskets etc. complete all as specified and directed of following sizes:- (Make : KIRLOSKAR / LEADER / L&T) |
| 51 | (a) 80 mm dia |
| 52 | (b)100 mmbore |
| 53 | (c) 150 mm bore |
| 54 | (d) 250 mm bore |
| 55 | M&L for mild steel framed work for valve pit chamber cover made of MS sheet, equal angle or other section including welding, cutting, hinges, locking arrangments including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 56 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, supports, filling on road cutting etc; including necessary form work etc complete all as specified and directed. |
| 57 | Taking down plaster including cleaning and hacking down surface of RCC/brick work and rubbing with wire brush including removal of debries to a distance n. exc 50 mtr complete all as specified and directed. |
| 58 | M&L for rendering 15mm thick on fair face of brick work in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed. |
| 59 | Taking up or down (from wall/trenches/floor) existing GI steel tubing and connections complete all as specified and directed of following sizes:- |
| 60 | (a) 15 mm bore |
| 61 | (b)20 mm bore |
| 62 | (c)25 mm bore |
| 63 | (d) 40 mm bore |
| 64 | (e) 50 mm bore |
| 65 | (f) 80 mm bore |
| 66 | (g) 100 mm bore |
| 67 | Refixing of old steel tubing and connections in new or old position including cleaning internally and externally, any grade/make and fixed/ laid in trenches/wall/floor/ceiling with and including providing of new fittings i.e. sockets, tee union, elbow etc. complete allas specified and directed of follwing size:- |
| 68 | (a) 15 mm bore |
| 69 | (b) 20 mm bore |
| 70 | (c) 25 mm bore |
| 71 | (d) 40 mm bore |
| 72 | (e) 50 mm bore |
| 73 | (f)80 mm bore |
| 74 | (g) 100 mm bore |
| 75 | S&L of GI tubing medium grade ISI Marked in any length including cutting, threading and connecting in new or old position, fixed/ laid in trenches/wall/floor/ceiling with and including providing of new fittings i.e. sockets, tee union, elbow etc. complete allas specified and directed of follwing size:- |
| 76 | (a) 15 mm bore |
| 77 | (b)20 mm bore |
| 78 | (c)25 mm bore |
| 79 | (d) 40 mm bore |
| 80 | (e) 50 mm bore |
| 81 | (f) 80 mm bore |
| 82 | (g) 100 mm bore |
| 83 | M&L for providing a pair of flanges in any existing pipeline including making threads on both ends of pipes with complete joints including fibre /neoprene rubber gasket, nuts, bolts, washers etc complete all asspecified and directed of following bore pipes :- |
| 84 | (a) 80 mm bore |
| 85 | (b)100 mm bore |
| 86 | (c)150 mm bore |
| 87 | S&F of 3 layer PP-R poly propylene random complymer concealed pipes (outer diameter of pipe ) SDR 7.4 (PN-10) UV stablized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain brass threaded polypropylene random fittings laid in trenches for following sizes :- |
| 88 | (a) 75 mm outer dia |
| 89 | (b) 50 mm outer dia |
| 90 | S&F of 50 mm outer dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specifed and directed. |
| 91 | Drilling and taping cast iron water mains of any dia (in position) for making branch connections complete all as specified and directed for following sizes:- |
| 92 | (a) 15 mm bore |
| 93 | (b) 20 mm bore |
| 94 | S&F in replacement Gun metal globe or gate valves, conforming to IS 778 with iron wheel head, screwed both ends for iron pipe and fixed in existing or new position for following sizes:- |
| 95 | (a)15 mm bore |
| 96 | (b)20 mm bore |
| 97 | (c)25 mm bore |
| 98 | (d)40 mm bore |
| 99 | (e)50 mm bore |
| 100 | (f)80 mm bore |
| 101 | S&F in replacment stainless steel splindle with check nut of existing type & size including opening, grinding , threading, replacement of nuts, bolts and washers including rubber sheet complete all as specified and directed for following sizes :- |
| 102 | (a) 80 mm bore |
| 103 | (b) 100 mm bore |
| 104 | (c) 150mm bore |
| 105 | M&L for painting on sump walls/ pipe etc. in pump houses with two coats of synthetic enamel paint of approved tint complete all specified and directed |
| 106 | S&F in replacement cast iron non return (Reflux) valve with flanged ends, non return with gun metal parts IS-5312, heavy duty, drilled for bolts including necessary rubber gasket joint with nuts, bolts, washers etc. complete all as specified and directed for the following sizes:- |
| 107 | (a) Non return Valve 250 mm dia bore size |
| 108 | (b) Non return Valve 150 mm dia bore size |
| 109 | (c) Non return Valve 100 mm dia bore size |
| 110 | (d) Non Return valve 80 mm dia bore size |
| 111 | (e) Non Return valve 50 mm dia bore size |
| 112 | S&F in replacement new mechanical Joint cast iron including nuts, bolts, washers and all connecting accessories complete all as specified and directed for following sizes:- |
| 113 | (a) 80 mm bore |
| 114 | (b) 100 mm bore |
| 115 | (c) 150 mm bore |
| 116 | Day to day maintanance of GI/CI/DI pipe line various sizes for minor reparing/rectifing and attending the complaint of pipe line leakage/float valve repairs of following dias by highly skilled trademan as required at site to complete job with stuiplated time without hampering water supply and making functional including all necessary T&P as required complete all as specified and directed. Note: (i) The quoted rates are exclusive of excavation and new GI fittings of suitable size. (ii) The trades man shall report to E/M complaint cell of AGE E/M SI Line, Bhopal daily at 8.30 am to take complaints from concern JE E/M. The complaint must be attended on same day in stuiplated time and complaint slip duly singned by the user shall be returened back at the complaint cell. (iii) Urgent complaint will be required to be completed on holiday or sunday. (iv) New GI fittings of suitable size, yarn & safeda/white lead shall be measured and paid separetally. |
| 117 | (a) 15 mm bore |
| 118 | (b) 20 mm bore |
| 119 | (c) 25 mm bore |
| 120 | (d) 40 mm bore |
| 121 | (e) 50 mm bore |
| 122 | (f) 80 mm bore |
| 123 | (g) 100 mm bore |
| 124 | (h) 150 mm bore |
| 125 | (j) 250 mm bore |
| 126 | S&F of 80 mm dia 100 mm long nipple complete all as specified and directed. |
| 127 | S&F of 80 mm dia GI socket complete all as specified and directed. |
| 128 | S&F of 80 mm GI elbow complete all as specified and directed. |
| 129 | S&F of 50 mm dia 100 mm long nipple complete all as specified and directed. |
| 130 | S&F of 50 mm dia GI socket complete all as specified and directed. |
| 131 | S&F of 50 mm GI elbow complete all as specified and directed. |
| 132 | S&F of 50 mm GI union complete all as specified and directed. |
| 133 | S&F of 50 mm tee complete all as specified and directed. |
| 134 | S&F of 40 mm dia 100 mm long nipple complete all as specified and directed. |
| 135 | S&F of 40 mm dia GI socket complete all as specified and directed. |
| 136 | S&F of 40 mm GI elbow complete all as specified and directed. |
| 137 | S&F of 40 mm tee complete all as specified and directed. |
| 138 | S&F of 40 mm GI union complete all as specified and directed. |
| 139 | S&F of 25 mm dia 100 mm long nipple complete all as specified and directed. |
| 140 | S&F of 25 mm GI socket complete all as specified and directed. |
| 141 | S&F of 25 mm GI elbow complete all as specified and directed. |
| 142 | S&F of 25 mm GI union complete all as specified and directed. |
| 143 | S&F of 25 mm GI tee complete all as specified and directed. |
| 144 | S&F of GI nipple 25 x 100 mm complete all as specified and directed. |
| 145 | S&F of 25 mm dia tank nipple complete all as specified and directed. |
| 146 | S&F of 20 mm dia 100 mm long nipple complete all as specified and directed. |
| 147 | S&F of 20 mm GI socket complete all as specified and directed. |
| 148 | S&F of 20 mm GI union complete all as specified and directed. |
| 149 | S&F of 20 mm GI elbow complete all as specified and directed. |
| 150 | S&F of 20 mm GI tee complete all as specified and directed. |
| 151 | S&F of GI reducer 15 x 20 mm complete all as specified and directed. |
| 152 | S&F of GI nipple 20 x 100 mm long complete all as specified and directed. |
| 153 | S&F of 20 mm tank nipple complete all as specified and directed. |
| 154 | S&F of 15 mm dia 100 mm long nipple complete all as specified and directed. |
| 155 | S&F of 15 mm GI socket complete all as specified and directed. |
| 156 | S&F of 15 mm GI union complete all as specified and directed. |
| 157 | S&F of 15 mm GI elbow complete all as specified and directed. |
| 158 | S&F of 15 mm GI tee complete all as specified and directed. |
| 159 | S&F of GI nipple 15 x 100 mm long complete all as specified and directed. |
| 160 | S&F of GI reducer 20/15 mm complete all as specified and directed. |
| 161 | S&F of GI reducer 25/15 mm complete all as specified and directed. |
| 162 | S&F of GI reducer 25/20 mm complete all as specified and directed. |
| 163 | S&F of GI reducer 40/15 mm complete all as specified and directed. |
| 164 | S&F of GI reducer 50/15 mm complete all as specified and directed. |
| 165 | S&F of GI reducer 40/20 mm complete all as specified and directed. |
| 166 | S&F of GI reducer 50/20 mm complete all as specified and directed. |
| 167 | S&F of GI reducer 40/25 mm complete all as specified and directed. |
| 168 | S&F of GI reducer 50/25 mm complete all as specified and directed. |
| 169 | S&F of GI plug 15 mm dia complete all as specified and directed. |
| 170 | S&F of GI plug 20 mm dia complete all as specified and directed. |
| 171 | S&F of GI plug 25 mm dia complete all as specified and directed. |
| 172 | S&F of GI plug 40 mm dia complete all as specified and directed. |
| 173 | S&F of GI plug 50 mm dia complete all as specified and directed. |
| 174 | S&F of 20 mm brass NRV complete all as specified and directed. |
| 175 | S&F of 25 mm brass NRV complete all as specified and directed. |
| 176 | S&F of 15 mm brass NRV complete all as specified and directed. |
| 177 | S&F of teflon tape complete all as specified and directed. |
| 178 | Testing of collected water sample from NABL /approved lab as per IS 10500: 2012 at main filter pump house SI Line complete all as specified and directed for following tests:- |
| 179 | (a) Table 1 Organoleptic and physical parameters |
| 180 | (b) Table 2 General parameters concerning subtance sundesirable in excessive amounts |
| 181 | (c) Table 3 Parameters concerning toxic substance |
| 182 | (d) Table 4 Parameters concerning radioactive substance |
| 183 | (e) Table 5 Pesticide Residues limit and test method |
| 184 | S&F in repairs Power Contactor ML-6, 3 pole, 415 V, 50 Hz, 3 Phase, 2 NO + 2 NC and making electrical connections complete all as specified and directed. Make: L&T |
| 185 | S&F in repairs Power Contactor ML-4, 3 pole, 415 V, 50 Hz, 3 Phase, 2 NO + 2 NC and making electrical connections complete all as specified and directed. Make: L&T |
| 186 | S&F in repairs Thermal overload relay (MN-5) with relay setting range 45-75 Amps, 415 V, 50 Hz, 3 Phase and making electrical connections complete and all as specified and directed. Make :- L&T |
| 187 | S&F in repairs Thermal overload relay (MN-5) with relay setting range 30-50 Amps, 415 V, 50 Hz, 3 Phase and making electrical connections complete and all as specified and directed. Make :- L&T |
| 188 | S&F in repairs Power Contactor ML-3, 3 pole, 415 V, 50 Hz, 3 Phase, 2 NO + 2 NC and making electrical connections complete all as specified and directed. Make: L&T |
| 189 | S&F in repairs DOL starter, 415 Volt suitable for 7.5 HP motor, relay range-20-32 Amp and making electrical connections complete all as specified and directed. Make: L&T / Havells/ HPL/ Bentex |
| 190 | S&F in repairs electronic timer for star delta starter type, timing range 3-30 sec and making electrical connections complete all as specified and directed. Make: L&T / Havells /HPL / Bentex |
| 191 | S&F in repairs single phase preventor, 6 wire, 415 volts and making electrical connections complete all as specified and directed. Make: L&T / Havells /HPL / Bentex |
| 192 | M&L for taking out unserviceable submersible pumping set complete with GI pipe of any capacity and any type from existing bore well carefully without damaging the pump set including connecting parts and lowering the same after carrying out repair work including provision of suitable size of nuts, bolts and washer and suitable packing for column pipes and connections of submersible cable complete all as specified and directed. Note: (i) Chain pully block and clamps etc shall be provided by the contractor. (ii) Necessary safety pracaution will taken by the contractor during execution of work. |
| 193 | Dismantling of centrifugal/ submersible/ monoblock/ pressure motors and taking out unserviceable spares and burnt copper binding wire complete with and including M&L for rewinding of motors with high class insulated copper winding wire including sleeves and replacement of worn out parts including grinding & polishing of rotor sleeves and refixing after testing completeall as specified and directed for following capacity motors:- Note: Any other unservicable parts shall measured and paid seperately under respective item of Schedule "A" as supply only. |
| 194 | (a) 50 HP motor |
| 195 | (b) 30 HP motor |
| 196 | (c) 25 HP Motor |
| 197 | (d) 10 HP motor |
| 198 | (e) 5 to 7.5 HP motor |
| 199 | (f) 3 HP Motor |
| 200 | (g) 0.5 HP to 2 HP pressure Motor |
| 201 | Dismantling and removing centrigual pump set of capacity 7.5 -10 HP, pump set with motor and transporting for servicing of pump motor to workshop for machining, greasing, changing gland packing or other minor parts like rubber/steel bushing, nuts, bolts and then re-fixing the same to its existing position with necessary fixing arrangement complete all as specified and directed. Note: Spare parts required to be replaced shall be measured & paid seperately. |
| 202 | Supply and fixing of the following parts of the submersible pump /centrifugal pump set for capacity between 7.5-10 HPcomplete all as specified and directed:- |
| 203 | (a) Bowl bush |
| 204 | (b) Impeller |
| 205 | (c) Neck ring |
| 206 | (d) Shaft sleeve |
| 207 | (e) Pump shaft |
| 208 | (f) Coupling |
| 209 | (g) Coupling key |
| 210 | (h) Impeller key |
| 211 | (j) Stud with nuts |
| 212 | (k) Thrust bearing |
| 213 | (l) Lower housing bush |
| 214 | (m) Upper housing bush |
| 215 | (n) Rotor shaft sleave |
| 216 | (o) Drain plug |
| 217 | (p) Water seal |
| 218 | (q) CI Bowl |
| 219 | (r) Rotor Shaft |
| 220 | Dismantling and removing centrigual pump set of capacity 25 HP, pump set with motor and transporting for servicing of pump motor to workshop for machining, greasing, changing gland packing or other minor parts like rubber/steel bushing, nuts, bolts and then re-fixing the same to its existing position with necessary fixing arrangement complete all as specified and directed. Note: Spare parts required to be replaced shall be measured & paid seperately. |
| 221 | Supply and fixing of the following parts of the centrifugal pump set for capacity between 25 HP complete all as specified and directed:- |
| 222 | (a) CI Impellar |
| 223 | (b) Shaft S/Steel |
| 224 | (c) Shaft Sleeve |
| 225 | (d) Impellar Key |
| 226 | (e) Impellar check nut |
| 227 | (f) Impellar ring Ci inter stage ring |
| 228 | (g) Gland cap/Split gland |
| 229 | (h) Eye bolt |
| 230 | (j) Ball bearing as per existing . Make SKF/NBC/Tata |
| 231 | (k) Pump bush |
| 232 | (l) Motor Air fan |
| 233 | (m) Metallic gland packing 10/12mm |
| 234 | (n) Bearing grease |
| 235 | (o) Bearing housing |
| 236 | Dismantling and removing centrigual pump set of capacity 30 HP, pump set with motor and transporting for servicing of pump motor to workshop for machining, greasing, changing gland packing or other minor parts like rubber/steel bushing, nuts, bolts and then re-fixing the same to its existing position with necessary fixing arrangement complete all as specified and directed. Note: Spare parts required to be replaced shall be measured & paid seperately. |
| 237 | Supply and fixing of the following parts of the centrifugal pump set for capacity between 30 HP complete all as specified and directed:- |
| 238 | (a) CI Impellar |
| 239 | (b) Shaft S/Steel |
| 240 | (c) Shaft Sleeve |
| 241 | (d) Impellar Key |
| 242 | (e) Impellar check nut |
| 243 | (f) Impellar ring Ci inter stage ring |
| 244 | (g) Gland cap/Split gland |
| 245 | (h) Eye bolt |
| 246 | (j) Ball bearing as per existing . Make SKF/NBC/Tata |
| 247 | (k) Pump bush |
| 248 | (l) Motor Air fan |
| 249 | (m) Metallic gland packing 10/12mm |
| 250 | (n) Bearing grease |
| 251 | (o) Bearing housing |
| 252 | Dismantling and removing centrigual pump set of capacity 50 HP, pump set with motor and transporting for servicing of pump motor to workshop for machining, greasing, changing gland packing or other minor parts like rubber/steel bushing, nuts, bolts and then re-fixing the same to its existing position with necessary fixing arrangement complete all as specified and directed. Note: Spare parts required to be replaced shall be measured & paid seperately. |
| 253 | Supply and fixing of the following parts of the centrifugal pump set for capacity between 50 HP complete all as specified and directed:- |
| 254 | (a) CI Impellar |
| 255 | (b) Shaft S/Steel |
| 256 | (c) Shaft Sleeve |
| 257 | (d) Impellar Key |
| 258 | (e) Impellar check nut |
| 259 | (f) Impellar ring CI inter stage ring |
| 260 | (g) Gland cap/Split gland |
| 261 | (h) Eye bolt |
| 262 | (j) Ball bearing as per existing . Make SKF/NBC/Tata |
| 263 | (k) Pump bush |
| 264 | (l) Motor Air fan |
| 265 | (m) Metallic gland packing 8/10mm |
| 266 | (n) Bearing grease |
| 267 | (o) Bearing housing |
| 268 | (p) Pump shaft |
| 269 | Disconnecting the electrical and pipe connection of existing pressure motor /mono block pump set of capacity 0.5 to 3 HP and replacing the following defective spare parts and making the pump sets completely functional complete all as specified and directed. Note: Spare parts required to be replaced shall be measured & paid seperately. |
| 270 | Supply and fixing of the following parts of the centrifugal pump set for capacity between 0.5 to 3 HP complete all as specified and directed:- |
| 271 | (a) Bearing of existing size (make SKF) |
| 272 | (b) Rubber kit |
| 273 | (c) Auto cut off switch/Pressure switch |
| 274 | (d) Non return valve brass |
| 275 | (e) Bladder |
| 276 | (g) Steel tank |
| 277 | S&F in replacement of flat submersible cable PVC insulated 3 core copper multi stranded 6 sq mm and making necessary connections fixed with suitable clips complete all as specified and directed. |
| 278 | S&F in replacement star delta starter, heavy duty, 3 phase, 415 volts for submersible motor pump set, mountedinside mild steel outdoor type panel of 2.0 mm thick sheet with all fabrication and welding works etc; duly painted with two coats of synthetic enamelled paint over a coat of red oxide primer, grouting in ground with angle iron 40x40x5mm frame work, 60cm above ground level, locking arrangement, all necessary internal wiring including digital voltmeter & ammeter, phase indication lamp, selector switch, single phase preventor, earthing terminals etc.complete all as specified and directed. Make: L&T /Siemens/C&S of following capacity motors:- |
| 279 | (a) 30 HP Relay Range-14-23 Amp |
| 280 | (b )50 HP Relay range-30-50Amp |
| 281 | S&F in replacement to ON load changeover switch, rotory type of 100 Amps, 415 Volts, TPN, front operated without sheet metal enclosure suitable for mounting on existing panel as per site requirement and making necessary connections complete all as specified and directed. Make: L&T /Havells/L&T |
| 282 | S&F for 10mm dia nylon braided cotton material rope for tie/anchoring with submersible pumpset complete all as specified and directed. |
| 283 | Supply & lowering of GI pipes 50 mm dia heavy duty, long socketed in boreholes including making necessary threads and fittings required at site for column pipe of submersible pump set complete all as specified and directed. Note: GI pipe will be lowered with cut piece of length not more than 3 m. |
| 284 | S&F in replacement 11 Watt LED aviation light on OH tank of 15/18/21 staging (on top of OH tank) with all accessories with and including two single core FRLS copper conductor cable of size 2.5 sqmm, drawn into rigid non metallic PVC conduit, medium grade with fittings from light to connection points with and including 1 No, two way MCB, DB with 1 No. MCB, SPN, "C" curve, capacity 10 Amp, 10 kA and making necessary cnnections complete all as specified and directed. |
| 285 | M&L for preparation of iron/steel surfaces of rising main, delivery, overflow and washout pipes of internal dia 200mm, 150mm,100mm respectively of OH tank of any capacity and height; and applying two coats of synthetic enamel paint (Blue, green, red and yellow colour/tint as approved) including marking with arrows (directions of flow) and writing date of cleaning with white synthetic enamel paint over black synthetic enamel paint background (approx size 300 mm x 300 mm) complete all as specified and directed. |
| 286 | Cleaning of surrounding areas of water supply instaliations, pump house, etc. by cutting all bushes, shrubs, sarkandas and any other types of vegetations and trees of girth upto 30 cm; removing and disposal of the waste retrieved to a distance not exceeding 100 m including all T&P as required complete all as specified and as directed. |
| 287 | Scrapping/complete removal of old painted surfaces of 7.5/ 10 HP motor and M&L for spray painting the surface with synthetic enamel paint, one or more coats as required and writing SM/ MES NO in different tint complete all as specified and directed. |
| 288 | Scrapping/complete removal of old painted surfaces of 30 / 25 HP motor and M&L for spray painting the surface with synthetic enamel paint, one or more coats as required and writing SM/ MES NO in different tint complete all as specified and directed. |
| 289 | Scrapping/complete removal of old painted surfaces of 50 HP motor and M&L for spray painting the surface with synthetic enamel paint, one or more coats as required and writing SM/ MES NO in different tint complete all as specified and directed. |
| 290 | S&F of 1100 volt graded heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 50 Sqmm normal corss section 3.5 core laid in trenches fixed to pole or passing through pipes incl all necessary clamps nuts, bolts and washers complete all as specified and directed by Engineer in Charge. |
| 291 | S&F of 1100 volts graded heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 35 Sqmm normal corss section, 3.5 core laid in trenches / fixed to pole or passing through pipes complete all as specified and directed. |
| 292 | S&F 1100 volt graded heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 16 Sqmm normal corss section 4 core laid in trenches / fixed to pole or passing through pipes complete all as specified and directed. |
| 293 | S&F of building security lights for pump houses 35 watt 230 V AC made up of pressure die cast aluminium housing with high effcient LED as lighting source and PC over having top opening seperate driver compartment with IP-66 protection and impact resistance of IK07 with suitable 32 mm bore galvanized iron pipe, light grade brackets of 1 mtr length, bent to shape including clamps, nuts, bolts, washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed. |
| 294 | Opening manhole cover of swimming pool pressure filter plants of 2000 mm dia and taking out all old/damage filter media, chemicals & pipe fittings for replacing dirty/muddy materials and putting filter media materials (stagewise as directed) and re-fixing all the pipes, manhole cover including replacement of 8.0mm thich top gasket, cleaning tank using costic soda and also replacing wornout nuts, bolts, washers etc; including testing of IR plant complete all as specified and as directed. Note: New filter media materials will be measured and paid seperately under respective item of Schedule "A". |
| 295 | S&F in replacement PVC filter nozzles as per existing model (Astral Pool- 03P002065) and site requirement complete all as specified and directed. |
| 296 | Supply and laying fresh sand of size 10 x 2mm and coefficient of uniformity as approved and filled in layers in filter bed complete all as specified and directed. |
| 297 | Supply and laying fresh sand of size 16 x 3mm and coefficient of uniformity as approved and filled in layers in filter bed complete all as specified and directed. |
| 298 | Supply and laying fresh graded gravels of size 40 to 50mm as approved and filled in layers in filter bed complete all as specified and directed. |
| 299 | Supply and laying fresh graded gravel of size 12 to 20mm as approved and filled in layers in filter bed complete all as specified and directed. |
| 300 | Supply and laying fresh graded gravel of size 6 to 12mm as approved and filled in layers in filter bed complete all s specified and directed. |
| 301 | Supply and laying fresh graded gravel of size 3.125 to 6mm as approved and filled in layers in filter bed complete all as specified and directed. |
| 302 | Supply and laying fresh graded gravel of size 1.562 to 3.125mm as approved and filled in layers in filter bed complete all as specified and directed. |
| 303 | Supply and laying fresh MNO2 filter media of size 20 to 40mm as approved and filled in layers in filter bed complete all as specified and directed. |
| 304 | Carefully washing out settled mud,alum,flocculant etc semi UG sump 15000 Glan cap. Drainning out complete waste water from tank by mannually or mechanical arrangment cleaning of bottom, all internal side walls, channel by using brooms, wiper or nylon brush , includingscrapping out andapplying one coat of super qualitylime on outer stone wall surface of semi UG Tank upto satisfaction of Engr in charge. |
| 305 | S&F of MCCB, TPN, 100 Amps, 415 Volts, 25 KA, C curve series and making necessary connections complete all as specifed and directed. |
| 306 | S&F of MCB, TPN, 63 Amps, 415 Volts, 25 KA, C curve series and making necessary connections complete all as specifed and directed. |
| 307 | S&F of MCB, TPN, 25 Amps, 415 Volts, 16 KA, C curve series and making necessary connections complete all as specifed and directed. |
| 308 | S&F of MCB, SP, 6 to 32 Amps, 240 Volts, 10 KA, C curve series and making necessary connections complete all as specifed and directed. |
| 309 | Demolition of brick work built in cement mortar including all quions arches, pillars etc complete all as specified and directed. |
| 310 | M&L for brick work with sub class "B " bricks straight or curved on plan exc 6 m mean radius for repairing of valve pit chamber built in cement mortor 1:6 complete all as specified and directed. |
| 311 | S&L of 110mm dia UPVC pipes (IS: 4985-2000, class V, 10 Kgf/cm2 pressure) (quick fit pipes) including injection moulded fittings (heavy duty) (plain or door) i.e. bends, junction, cowls, tees, offsets, access pieces etc; and jointing with rubber ring/solvent cement joints including cutting chases or holes in walls and floors and making good as required complete all as specified and directed. |
| 312 | S&F in replacement UPVC butterfly gate valve of size 110 mm outer dia and jointed with solvent cement all as specfied and directed. |
| 313 | S&F in replacement PVC hose pipe of size 50 mm dia, ISI marked, heavy duty suitable for suction sweeper and fixed complete all as specified and directed. |
| 314 | S&F in replacement 25 mm dia nylon rope for suction sweeper complete all as specified and directed. |
| 315 | Supply only strainer fitted with handle for taking out floatable material from swimming pool manually complete all as specified and directed. |
| 316 | S&F for CI/DIfittings i.e bends, tapers, tee pieces ( single and double branch), any type and angle/radius and straight connecting pieces but both ends flanged for up to 200 mm bore complete all as specified and directed. |
| 317 | M&L for applying two coats of epoxy coating Nito bond SBR coat EP-405 (water proofing compound) of 100 micron layer over one coat of primer SBR, applied as per manufacturer instructions complete all as specifed and directed. |
| 318 | M&L for construction of brick massonry valve pit chamber of inner dimension 1200 x 1200 x 1200 mm (internal dimension) with PCC 1:4:8 type D-2 as in foundation, one brick thick wall brick work in CM 1:6, 15mm thick internally plaster in CM 1:4, coping in PCC 1:2:4 type B-1 with and including 2mm thick MS sheet cover on 50x50x6 mm angle iron framework with locking arrangement and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed. |
| 319 | M&L for construction of brick massonry valve pit chamber of inner dimension 900 x 900 x 900 mm (internal dimension) with PCC 1:4:8 type D-2 as in foundation, one brick thick wall brick work in CM 1:6, 15mm thick internally plaster in CM 1:4, coping in PCC 1:2:4 type B-1 with and including 2mm thick MS sheet cover on 50x50x6 mm angle iron framework with locking arrangement and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed. |
| 320 | M&L for construction of brick massonry valve pit chamber of inner dimension 600 x 600 x 600 mm (internal dimension) with PCC 1:4:8 type D-2 as in foundation, one brick thick wall brick work in CM 1:6, 15mm thick internally plaster in CM 1:4, coping in PCC 1:2:4 type B-1 with and including 2mm thick MS sheet cover on 50x50x6 mm angle iron framework with locking arrangement and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed. |
| 321 | M&L for construction of brick massonry valve pit chamber of inner dimension 450 x 450 x 450 mm (internal dimension) with PCC 1:4:8 type D-2 as in foundation, one brick thick wall brick work in CM 1:6, 15mm thick internally plaster in CM 1:4, coping in PCC 1:2:4 type B-1 with and including 2mm thick MS sheet cover on 50x50x6 mm angle iron framework with locking arrangement and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed. |
| 322 | M&L for construction of brick massonry valve pit chamber of inner dimension 1000 x 1000 x 1000 mm (Internal dimension) suitable for sluice valves upto 100mm size with PCC 1:4:8 type D-2 as in foundation, one brick thick wall brick work in CM 1:6, 15mm thick internally plastered in CM 1:4, coping in PCC 1:2:4 type B-1 with and including 2mm thick MS sheet cover on 50x50x6.0 mm angle iron framework and applying two coats of synthetic enamelled paint over a coat of red oxide primer, provision of locking arrangement including demolistion of old valve pit and removing the debris from the site complete all as specified and directed. |
| 323 | Supply only of digital electronics pen type water sample test kit ISI marked with digital display suitable for drinking/ swimming pool water including TDS (PPM meter) meter, digital pH meter, litmus paper (pH strip) and pH powder complete all as specified and directed. |
| 324 | Supply and mixing chemical TCCA 90 granules (5-8 mesh) type suitable for disinfecting swimming pool water and controlling algae & bacteria ISI marked complete all as specified and directed. |
| 325 | Supply and mixing chemical soda ash (Sodium carbonate Na2CO3) powder type suitable for pH controlling of swimming pool water (ISI marked) complete all as specified and directed. |
| 326 | Supply and mixing for chemical copper sulphate (CuSO4) granules type suitable for controlling algaecide of swimming pool water (ISI marked) complete all as specified and directed. |
| 327 | Supply and mixing for chemical Aluminium sulphate (Fitkari) (Al2(SO4)3) crystal granules type suitable for flacculating of swimming pool water (ISI marked) complete all as specified and directed. |
| 328 | Dismantling of undulated existing pressed precast cement concrete paver blocks of any description / size and re-fixing the same in new or old position after levelling the ground to receive flat surfaces complete all as specified and directed. |
| 329 | M&L for repairing to damaged roads section in patches with instant ready made premix superior road patching cold bitumen compound with a blend of bitumen, aggregates and high grade polymers to immediate bonding complete all as specified and directed. |
| 330 | Deduct Schedule of credit (calculation will be done off line) Rs. 223653.00 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
