Military Engineer Services-MES has published Tender For Improvement Of Sewage System Of Md Accommodation At St, Bt And Tandon Camp Area At Afs Amla.. Submission Date for this Tender is 05-02-2024. Road Work Tenders in Betul Madhya Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 29-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-02-2024 |
Sl. No. | Item Description |
1 | Excavation in trenches n. exc 1.5 metre wide and n.exc 1.5 metre in depth for foundations etc. or for shafts, wells, manholes etc. not exc. 10 Sqm on plan and n exc 1.5 meter in depth and getting out in soft/loose soil in foul) Condition complete all as specified and directed |
2 | All as per item 01 here in before but exceeding 1.5 metre and not exceeding 3 metre. |
3 | Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15cm thick (below or above ground level) complete all as specified and as directed. |
4 | Demolition of brick work built in cement mortar (manhole soak well & septic tank etc.) including coping all as specified and as directed. |
5 | Demolition and Breaking up drain pipes of internal dia 150mm including PCC haunching, benching and bed Concrete complete all as per Engr-In-Charge. |
6 | M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed. |
7 | M&L 150 mm dia Reinforced cement concrete pipes, Class NP-3, laid in trenched and jointed with collar, complete all as specified. |
8 | M&L 200 mm dia Reinforced cement concrete pipes, Class NP-3, laid in trenched and jointed with collar, complete all as specified. |
9 | M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate, bed to drain pipes including packing under and haunching against sides of pipes for 150 mm bore after they are laid and tested complete all as directed |
10 | M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate, bed to drain pipes including packing under and haunching gainst sides of pipes for 200 mm bore after they are laid and tested complete all as directed. |
11 | M&L FIy ash brick 75 kg/cmsg compressive strength. Modular size , is sleight or curved on plain exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified |
12 | M&L for PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in coping. hold fast and the like including weathering slightly rounded or chamfered angles and throting as directed with necessary formwork and finishing exposed faces of concrete complete all as specified |
13 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in benching and finishing the surfaces even and smooth using extra cement complete all as specified. |
14 | M&L 15mm thick rendering in cement mortar 1:4. on fair faces of brick work finished even and smooth without using extra cement |
15 | M&L for providing precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas set in cement mortar 1:4 including necessary form work complete all as specified. |
16 | M&L for mild steel TMT bars, 10 mm dia and over, cut to length bent to shape required, including cranking bending spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified. |
17 | M/L for handles, rungs, brackets etc and similar articles made out of mild steel round bars 12mm dia and over bent to bent to shape required all as directed. |
18 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cms thick and getting out soft/loose soil complete all as specified and directed. |
19 | Removing excavated material exc 50m but not exc 250m deposited/spreaded where as in soil or material complete all as specified and as directed |
20 | Supply and laying of GI medium grade with all fitting complete fixed to wall/flooring/ceiling etc or laid in trenches all as specified. |
21 | 20 mm bore |
22 | 40 mm bore |
23 | 50 mm bore |
24 | Supply and fix gun metal globe or gate valves with iron wheel head screwed both ends for GI pipe all as specified for the following sizes. |
25 | 20 mm bore |
26 | 40 mm bore |
27 | 50 mm bore |
28 | Cutting existing steel tubbing in position for alteration or addition as per site (Each cutr measured) in any condition of size 40 to 50 mm bore. all as specified and as directd |
29 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch "A" while deriving the Contract Sum for Acceptance. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail