Tender For Center Bearing Block - Pr No. 33396647, Hazira-Gujarat

Tender For Center Bearing Block - Pr No. 33396647 1 33396647 00010 00010 300088277 CENTER BRG BLOCK,DRG:39195530 Technical Details Name : Kaushal Patel Contact : Email : kaushal.patel1@amns.in 250 NO APD NOMENCLATURE : CENTER BEARING BLOCK , DRAWING NUMBER : 39195530 ADDITIONAL INFORMATION : SYM.LEFT Item Details : 1.MTC ( Chemical <(>&<)> Mechanical properties as per relevant material specification ) required for review as per approved Drawing material <(>&<)> Specification item wise. No any changes acceptable in MOC. 2.UT Report of Plate ( 10 mm <(>&<)> above Thickness ) as per SA 578 – Level C will be review by AMNS. 3.Detail Vendor internal Inspection Report – Dimensional including Ra value of Bearing Seat ID ( 100% ), DPT Report of weld joints ( 100% ), Hydro Test Report ( 100% ) will be review by AMNS. 4.Heat Treatment Chart will be review by AMNS. 5.Final Inspection – Visual, Dimensional, DPT of Weld joints <(>&<)> Hydro Test will be witness by AMNS at Vendor place. 6.Submit detail quality documents with proper traceability for review before proceeding for final Inspection at Vendor place. Item Note : 2 33396647 00020 00020 300088233 CENTER BRG BLOCK SYM,DRG:39198230 Technical Details Name : Kaushal Patel Contact : Email : kaushal.patel1@amns.in 90 NO APD NOMENCLATURE : CENTER BEARING BLOCK SYM , DRAWING NUMBER : 39198230 Item Details : 1.MTC ( Chemical <(>&<)> Mechanical properties as per relevant material specification ) required for review as per approved Drawing material <(>&<)> Specification item wise. No any changes acceptable in MOC. 2.UT Report of Plate ( 10 mm <(>&<)> above Thickness ) as per SA 578 – Level C will be review by AMNS. 3.Detail Vendor internal Inspection Report – Dimensional including Ra value of Bearing Seat ID ( 100% ), DPT Report of weld joints ( 100% ), Hydro Test Report ( 100% ) will be review by AMNS. 4.Heat Treatment Chart will be review by AMNS. 5.Final Inspection – Visual, Dimensional, DPT of Weld joints <(>&<)> Hydro Test will be witness by AMNS at Vendor place. 6.Submit detail quality documents with proper traceability for review before proceeding for final Inspection at Vendor place. Item Note : 3 33396647 00030 00030 300088207 CENTER BRG BLOCK SYSTEM,DRG:39200930 Technical Details Name : Kaushal Patel Contact : Email : kaushal.patel1@amns.in 160 NO APD NOMENCLATURE : CENTER BEARING BLOCK SYSTEM , DRAWING NUMBER : 39200930 Item Details : 1.MTC ( Chemical <(>&<)> Mechanical properties as per relevant material specification ) required for review as per approved Drawing material <(>&<)> Specification item wise. No any changes acceptable in MOC. 2.UT Report of Plate ( 10 mm <(>&<)> above Thickness ) as per SA 578 – Level C will be review by AMNS. 3.Detail Vendor internal Inspection Report – Dimensional including Ra value of Bearing Seat ID ( 100% ), DPT Report of weld joints ( 100% ), Hydro Test Report ( 100% ) will be review by AMNS. 4.Heat Treatment Chart will be review by AMNS. 5.Final Inspection – Visual, Dimensional, DPT of Weld joints <(>&<)> Hydro Test will be witness by AMNS at Vendor place. 6.Submit detail quality documents with proper traceability for review before proceeding for final Inspection at Vendor place. Item Note :

Refer document

Refer document

Refer document