Tender For Rfq - Various Pulley Shaft Idler - 6 Items 1 33375987 00010 00010 300871178 SLEEVE,SHAFT,DRG:HBI-GB-SLEEVE-PLC20,40 Technical Details Name : Navneet Kumar Shukla Contact : 9909901012 Email : navneet.shukla@amns.in 10 NO SLEEVE,SHAFT SIZE:40X50X25 MM , APPLICATION AREA EQUIPMENT:PLC-20 GEARBOX DRAWING DRG NO:HBI-GB-SLEEVE-PLC20 , DRAWING REV NO:0 Item Details : 1. Vendor must submit GA dwg’s, QAP, technical data sheet etc with their offer/quotation for necessary technical evaluation purpose (wherever applicable) 2. In case of any query vendor must discuss with the user or may visit the site for technical discussion before submitting their offer. 3. Vendor must submit all internal inspection reports, MOC test certificates and all applicable documents before dispatch of material from their site to receive Dispatch Clearance from user. 4. In case of any failure or defects vendor must take care of necessary replacements at their own cost on immediate basis. 5. Material required as per PO only. Any deviation in the supply w.r.t PO shall lead for rejection of the material Item Note : 2 33384073 00130 00020 300308305 TRANSITION IDLER,DRG:SMS/MFS/67/IT-2 Technical Details Name : Prajapati, Bhavik - AM/NS India - SMP Ma Contact : 9879101412 Email : Bhavik.Prajapati@amns.in 1,800 NO APD NOMENCLATURE : STEEL TROUGHING TRANSITION IDLER DRAWING NUMBER : SMS/MFS/67/IT-2 , MAJOR ASSEMBLY : AFC5 CONVEYOR Item Details : ALL BELOW REPORTS REQUIRE FOR REVIEW BEFORE DISPATCH. AFTER REVIEW CLEARANCE WILL BE GIVEN OR INSPECTION TO BE DONE AT VENDORS WORKS. DIMENSIONAL REPORT + CHEMICAL ANALYSIS + MECHANICAL PROPERTIES + HARDNESS REPORT (WHERE APPLICABLE) + UT REPORT (WHERE APPLICABLE) + FREE ROTATION REPORT + WATER AND DUST PROOF TEST + FRICTION FACTOR TEST NOTES : (1) WE NEED MATERIAL EXACT AS PER DRG / BOM. (2) NO ANY ALTERNATIVE MATERIAL WILL BE ACCEPTED. (3) MATERIAL CODE AND PO NUMBER MUST MENTION IN ALL TEST REPORT. Item Note : 3 33390429 00010 00030 300889293 PULLEY,CONVR,NDV,220X1310MM,60X1510MM,1 Technical Details Name : Navneet Kumar Shukla Contact : 9909901012 Email : navneet.shukla@amns.in 2 NO PULLEY,CONVEYOR TYPE:NON DRIVE , DRUM PULLEY DIA X FACE WIDTH:220 X 1310 MM BELT WIDTH:1200 MM SHAFT DIA AT BEARING X OVERALL SHAFT LENGTH:60 X 1510 MM DRUM SHELL THICKNESS:10 MM , LAGGING PATTERN:WITHOUT LAGGING SHAFT MATERIAL:EN19-BS 970 , BEARINGS CENTRE DISTANCE:1450 MM DRAWING DRG NO:SQ-03-00358 , DRAWING REV NO:0 4 33390429 00020 00040 300892087 SHAFT,SLD,DRG:HBI-SINT-TRP-01,2070MM,11 Technical Details Name : Navneet Kumar Shukla Contact : 9909901012 Email : navneet.shukla@amns.in 2 NO SHAFT,SOLID TYPE, APPLICATION:TRIPPER DRIVE SHAFT , LENGTH:2070 MM DIAMETER:110 MM , DRAWING DRG NO:HBI-SINT-TRP-01 DRAWING REV NO:0 Item Details : 1. Vendor must submit GA dwg’s, QAP, technical data sheet etc with their offer/quotation for necessary technical evaluation purpose (wherever applicable) 2. In case of any query vendor must discuss with the user or may visit the site for technical discussion before submitting their offer. 3. Vendor must submit all internal inspection reports, MOC test certificates and all applicable documents before dispatch of material from their site to receive Dispatch Clearance from user. 4. In case of any failure or defects vendor must take care of necessary replacements at their own cost on immediate basis. 5. Material required as per PO only. Any deviation in the supply w.r.t PO shall lead for rejection of the material Item Note : 5 33392679 00070 00050 300084735 TAIL PULLEY374x1295,DRG:ES/MECH/00600-03 Technical Details Name : Niraj Patel Contact : Email : niraj.patel1@amns.in 3 NO APD NOMENCLATURE : TAIL PULLEY , 374 DIAX1295 MM DRAWING NUMBER : ES/MECH/00600-03 , MATERIAL : MILD STEEL MATERIAL SPECIFICATION : MS ADDITIONAL INFORMATION : BOSS : 150/104,SIZE : 150X104.2 DIAX110 MM,SHELL THICKNESS : 10 MM Item Details : MATERIAL TEST CERTIFICATE FOR PHYSICAL <(>&<)> CHEMICAL PROPERTY REQUIRED. INTERNAL INSPECTION REPORT TO SUBMIT BEFORE DISPATCH Item Note : 6 33392679 00080 00060 300084730 APD,TAIL SHAFT D104 MMx2150 MM LONG;APD: Technical Details Name : Niraj Patel Contact : Email : niraj.patel1@amns.in 3 NO APD NOMENCLATURE : TAIL SHAFT DIA 104 MMX2150 MM LONG DRAWING NUMBER : ES/MECH/00392-04 , MATERIAL : EN-8 MAJOR ASSEMBLY : MESH BELT ADDITIONAL INFORMATION : SIZE : DIA 104 X 2150 MM LONG
