Tender For Commercial Plot No.-Jc-01 To Jc In Block J Of Anand Vihar Residential Scheme. 11 C. Internal Development Work Of Plots. .
Tender Value
29.36 Lakhs
Estimated cost
Bid Submission
30 Jan 2024
0 days left
EMD
1.47 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
hapur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Commercial Plot No.-Jc-01 To Jc In Block J Of Anand Vihar Residential Scheme. 11 C. Internal Development Work Of Plots.
BOQ
| Sl. No. | Item Description |
| 1 | PART(A):-SEWER AND WATER WORK |
| 2 | Excavation in Foundation in ordinary soil (load, clay or sand) incuding lift upto 1.50m and lead upto 30m. And including filling watering and ramming of excavated earth into the tranches or into space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30m from the foundation trenches. |
| 3 | Cement concrete with 4 cm gauge approved stone ballast coarse sand & cement in the proportion of 8:4:1 including supply of all materials , labour, tools & plants etcc required for proper completion of the work.In bedding of RCC pipes,including cost of form work in thetrenches |
| 4 | (A) Supply,Carting Laying & Jointing of NP-3 RCC humepipe of different dia , & special from store to site of work lowering the same in trenches in depth upto specified depth true to alignment, caucking the joints with 1:2 cement & coarse sand mortar s/c excavation of earth below invert level of pipe, cost of all jointing materials, testing etc. complete (A.R.) 250 mm dia pipe(I) 0-1.5 MBGL |
| 5 | (A) Supply,Carting Laying & Jointing of NP-3 RCC humepipe of different dia , & special from store to site of work lowering the same in trenches in depth upto specified depth true to alignment, caucking the joints with 1:2 cement & coarse sand mortar s/c excavation of earth below invert level of pipe, cost of all jointing materials, testing etc. complete (A.R.) 150 mm dia pipe(I) 0-1.5 MBGL |
| 6 | Supply carting & laying of H.D.P.E. pipe of different dia ISI marked with and including all freight taxes etc. all complete.(A) 110 mm dia OD 6 kg /sqcmPressure |
| 7 | (B) 25 mm dia |
| 8 | Making connection of Drain or sewer line with existing M.H …………………..pipes 250 to 300mm diameter 110X25 MM |
| 9 | Making connection of Drain or sewer line with existing M.H …………………..pipes 250 to 300mm diameter |
| 10 | Construction of brick masonry chamber of 560 mm internal dia with F.P.S. bricks i/c s/o all material, labour T&P etc. reqd. for proper completion of work as per direction of E/I as per approved design & drawing of H.P.D.A. (A.R.) (A) 900 mm deep |
| 11 | Addition or subtraction of ht of M.H. ofof different internal size manhole M-150 class B/W, 1:6 cement mortar, int. plaster 1:212, neat cement finished & 3 No. foot rest i/c s/o all mat lab. T&P etc. complete (A.R.)(0.60x0.60x1.00) m. |
| 12 | Addition or subtraction of ht of M.H. ofof different internal size manhole M-150 class B/W, 1:6 cement mortar, int. plaster 1:212, neat cement finished & 3 No. foot rest i/c s/o all mat lab. T&P etc. complete (A) Bottom dia 900mm(Beyond 900 to 1650mm BGL) |
| 13 | Construction of brick masonry chamber of different internal size i/c s/o all material, labour T&P etc. reqd. for proper completion of work as per direction of E/I as per approved design & drawing of H.P.D.A. (A) 600x600x600 mm |
| 14 | Providing Precast Concrete Manhole Cover & Frame conforming of to IS:12592-2002.The concrete mix should not be less than M-30. Heavy duty,HD-20 grade desination -560 mminternal dia |
| 15 | Providing Precast Concrete Manhole Cover & Frame conforming of to IS:12592-2002.The concrete mix should not be less than M-30. Heavy duty,HD-20 grade desination -600x600mm internal size |
| 16 | PART(B):- ROAD WORK |
| 17 | Earthwork in cutting or in embankment in ordinary soil, excavation to be done from regular pits not exceeding 1/2 M. in depth and work embankment to be in 20 cm layer including ramming and dressing the surface to required levels and slopes and also including 1.5M lifts andlead up to 8 km . The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30M distance as directed by the Engineer-in-charge, excluding the cost of royalty of earth. |
| 18 | Extra for mechanically compacted to achive 95% proctors density including arrangement of water, settlement of all T & P charges including roler and its fuel charge. |
| 19 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density,complete as per clause 401, |
| 20 | Providing & laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layer with paver in sub- base/base coarse on well prepared surface and compacting with vibratory roller to achieve the desired density, MORT&H - 406. |
| 21 | Providing and applying primer coat with 80/100 bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 Kg/sqm. using mechanical means, including supply of all materials, labour, T&P etc required for proper completion of the work as per Clause- 502 of MORT & H specifications and as per direction of the Engineer-in-charge. (A.R.) |
| 22 | Providing and applying tack coat with 80/100 bitumen emulsion on prepared surface of granular base including ……………..of the Engineer in charge (A.R) |
| 23 | Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen 80/100(VG10) required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades |
| 24 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levelgrade & cross fall using Type B seal coats as per clause 513 of MOSRT &H specification and as per dierction of the E/I (A.R.) |
| 25 | Supply and fixing of 60 mm thick I shaped rubber moulded cement grey / ordinary red inter locking cement concrete paver blocks confirming IS:15658/2006 of approved shape manufactured by high pressure and control vibration machine having plan dimension 200x(160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The compressive strength of concrete paver block shall not be less than 30 MPa (M-30) including levelling & dressing of surface up to required level and slopes filling joints with local sand including cost of material, labour, T&P required for proper completion of work as directed by E/I and as per approved specifications. |
| 26 | Brick edging on both side of the road of M-150 brick 7cm wide & 11cm deep laid with mud motar i/c labour & supply of brick……………. The excavated earth as directed byE/I |
| 27 | PART(C):-DRAIN WORK |
| 28 | Excavation in Foundation in ordinary soil (load, clay or sand) incuding lift upto 1.50m and lead upto 30m. And including filling watering and ramming of excavated earth into the tranches or into space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30m from the foundation trenches. |
| 29 | Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. reuired for proper completion of the work. |
| 30 | M-150 Brick work in 1:4 (1 Cement : 4 coarse sand) in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 31 | Cement concrete with 2cm gauge approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. |
| 32 | 12mm thick plaster with cement and coarse sand in 1:4 over brick work minimum thickness not to be less than 10mm thick including supply of all materials, labous and T&P etc. required for proper completion of the work. |
AI Tender Summary
Tender Timeline
Jan 18, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 30, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 30, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender