Tender For Repairing Of Existing Community Meeting Hall At Ghatbera Beat Under Balarampur Range Of Divisional Forest Officer, Purulia Division Of 2023-24 ( Project-2 ) ( 3Rd Call )
Tender Value
2.50 Lakhs
Estimated cost
Bid Submission
26 Jan 2024
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
750
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
balarampur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairing Of Existing Community Meeting Hall At Ghatbera Beat Under Balarampur Range Of Divisional Forest Officer, Purulia Division Of 2023-24 ( Project-2 ) ( 3Rd Call )
BOQ
| Sl. No. | Item Description |
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.( A ) In side of room |
| 2 | ( B ) out side room |
| 3 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar (b) 20 mm thick plaster (b)out sibe the room |
| 4 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:4 cement mortar(ii) With 1:4 cement mortar(b) 15 mm thick plaster(a) inside the room |
| 5 | M.S. works in framed gratings of window etc.made of round or square bars and frame work or M.S. flats (with the bars securely fixed to the flat bar frame) with or without intermediate flat bar stiffener and fixed with necessary screws etc. complete, as directed.(35 x 35 x 6 mm ) |
| 6 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.(all complete) |
| 7 | (a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 8 | (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 9 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :iv) Two coats (with any shade except white) |
| 10 | (b) On steel or other metal surface :(iv) Two coats (with any shade except white) |
| 11 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety |
| 12 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (C) Floor With Polymerised Adhesive and Epoxy grout pointing |
| 13 | D) Wall With Polymerised Adheshievs &e Eapnodxy Egproouxyt pogirnotiuntg pointing |
| 14 | Add Electrical Works @ 8% of Maintenance Cost |
| 15 | Add Sanitary & Plumbing Works @ 4% of Maintenance Cost |
| 16 | GST (18%) |
| 17 | CESS (1%) |
| 18 | Contingency ( not more than 3%) |
AI Tender Summary
Tender Timeline
Jan 18, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 26, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 29, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender