|
| 1 | Labour for drilling a perfectly vertical bore hole of specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of Engineer -In Charge including supply of Rig with its accessories, tools and plant and consummables etc for lowering of finished bore for 450mm dia. & suitable for lowering of 200mm dia PVC pipes for housing fitted with socket with or without well screeen as per the necessity for the soft, medium, hard and boulder formation (G.I/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200mm to 450mm dia in over burder portion uoto 100Mtr. (0 to 38 mtr.) |
| 2 | Supply of all labour and T & P for lowering following size G.I/PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position including cutting and threading pipe and slotted pipe and fixing all joint materials, tools and plants etc complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry to foreign materials from above excluding cost of fittings and jointing materials and packing gravels around the casing in the annular space as per the direction of the Engineer. |
| 3 | Cost of 200 mm dia PVC Casing pipe (ASTM-Schedule-20 Pipe) |
| 4 | Labour charges for making strainer pipe out of total casing pipe including loading, unloading & transportation. |
| 5 | Cost of bentonite drilling mud including transportation to site, etc |
| 6 | Providing of Graded and washed gravel of \"B\" grade including transportation to site etc complete as per direction of Engineer -in-Charge. |
| 7 | Cost of 200 mm dia PVC Cone. |
| 8 | Cost of 200 mm dia PVC end cap |
| 9 | Cost of 200 mm dia PVC Nipple |
| 10 | Cleaning and developing the Tube well using own Air compressor continuously worked till clear and adequately discharge is obtained from the well including supply and use of all necessary equipments and labour complete as per the direction of Engineer in charge. |
| 11 | Excavation of mud pit, settling pit & fluid channel & back filling with preparation of approaches to movement of rig and ancillaries etc complete. |
| 12 | Supply of all labour and T & P for operation of 5 HP Water Pump for 10 hours |
| 13 | Add for trial boring vide Lr. No. 5680/22.02.2023 of MD, OLIC Ltd, BBSR |
| 14 | Supply all labour,T & P, Earth work in excavation of foundation in Hard soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.(including 1% labour cess) |
| 15 | Supplying all materials, labour, T&P and filing foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc. complete all as per direction of the Engineer-in-charge.(including 1% labour cess) |
| 16 | Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size crusher broken black hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. l completeall as per specification and direction of the Engineer-in-charge..(Excluding Empty cement Bag).(including 1% labour cess) |
| 17 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size crusher broken black hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc.complete all as per specification and direction of the Engineer-in-charge..(Excluding Empty cement Bag).(including 1% labour cess) |
| 18 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) for RCC work with 12mm size crusher broken black hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge..(Excluding Empty cement Bag).(including 1% labour cess) |
| 19 | Supplying all materials, labour, T&P and providing brick work with FLy Ash. bricks (25x12x8mm) Size, having crushing strength not less than 75kg / sqcm with dimensional tolerance ± 8 percent in C.M (1:6) in F&P including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etccomplete all as per specification and direction of the Engineer-in-charge. (Excluding Empty cement Bag). (including 1% labour cess) |
| 20 | Supplying all materials, labour, T&P and filing foundation and plinth with excavated materials within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.(including 1% labour cess ) |
| 21 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:6) over Brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge. (including 1% labour cess) |
| 22 | Supplying all materials, labour, T&P and providing cement punning over plastering including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge. (including 1% labour cess). |
| 23 | Supplying all materials, labour, T&P and providing Rigid and smooth centering and shuttering for RCC works with steel shuttering plates and dismantling them after casing including cost of materials complete in wall of T.Tanks etc. (including 1% labour cess). |
| 24 | Supplying all materials, labour, T&P and providing HYSD bar reinforcement for R.C.C. work including cutting, bending, binding and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-in-charge. (SAIL TMT EQR/IS-1786 FE500 D) (including 1% labour cess) |
| 25 | Supplying all materials, labour, T&P and providingpainting two coat with approved paint etc complete(including 1% labour cess) |
| 26 | Supplying all materials, labour, T&P forLabour charges for laying & fitting of 160 mm ? PVC Pipe (including 1% labour cess). |
| 27 | Supplying all materials, labour, T&P for Writing of Display Board in Black colourband. (including 1% labour cess). |
| 28 | Supplying all materials, labour, T&P and providing of out let |
| 29 | Cost of Full thread Nut & Bolt ( 5/8\"x3\"),3/8\"X3\",1/2\"X2\" (Heavy Duty) |
| 30 | Cost of 3mm (1/8) Rubber Inseration. |
| 31 | Cost of 6 HP S/S Pumpset having discharge of 700LPM at 25 meter head including testing. |
| 32 | Control Panel with Automatic Star Delta starter sheet steel enclosure for operation of squirrel cage induction motor upo 15 HP with 16 Amp (AC-3) contactor at 415 volt +6%-15%, 3 phase, 50 Hz, AC supply with suitable overload relay & No volt coil with electric pnemutic timer suitable for operation at voltage range of 300-440 volt including cost of transportation to site. The starter should provide dependable protection against overload and single phasing & should be of reputed brand having wide dealership network for easy availability of spares.NB: Starter will be sent to PTL, OLIC, Bhubaneswar at random for necessary testing at the contractor\"s cost. |
| 33 | Cost of 32 AMP T.P.mainswith confirming to IS No 4064 with ISI marking of reputed company with utilisation capacity cagegory AC-22. |
| 34 | 3 KVAR Capacitor (including 1%cess) |
| 35 | 3*10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 1554 (Pt-5)/1988 including cost of transportation to site. |
| 36 | 1.50mm2 S/S (3 Core) flat cable |
| 37 | Cost of 80 dia nominal bore G.I. pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS - 554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P site . The socket confirming to ISI 1239(part-II/1992) with latest ammendments in random length of 4 to 7 mtr . Each pipe should bear IS: certification and manufacturers name/trade mark. |
| 38 | Unplasticised rigid UPVC pipe 160 mm dia ivory grey in colour having specific gravitity of 1.40 to 1.46 gms/cc of straight length of 6 (six) mtrs for portable water supplies confirming to IS-4985/2000 of BIS- ammendments-2 read with table I of IS- specification bearing ISI marks for working pressure & Class I UPVC pipe to withstand pressure of 2.5Kgf/sqcm and the specification and manufacturer name should be prominently marked on body of each pipe as per latest Amendment of IS- 4985. It includes the cost of sockets in case of plain ended pipes. PDI test are tobe conducted and should be marked on body of the each pipe & report is tobe abtained from CIPET, Bhubaneswar/EPM. Orissa, BBSR for necessary approval of authority. |
| 39 | Cost of 160 mm x 160 mm x110 mm ØWeldless G.I. Tee (3.6mm Thickness) with bend, closing and opening arrangement of reputed company |
| 40 | Cost of80 mmdia G. I. Bend confirming to IS No. 1239(part ii/ 1992) with ISI marking. |
| 41 | Cost of 80 mm dia G.I.Flange confirming to IS No. 6392/1971 with ISI marking. |
| 42 | Cost of 80 mm dia Sluice valve confirming to IS 53129part-I) with ISI mark . |
| 43 | Cost of 80 mm dia N. R valve confirming to IS 53129part-I) with ISI mark G. Mfitting S/S hingepin with bypass arrangement. |
| 44 | Cost of 50 mmdia C. I Air release valve (single action ) confirming to IS 14845(SI) with ISI marking with sadle riser pipe etc. |
| 45 | Cost of 160 mm x 160 mm x 160 mm Ø PVC Equal Tee (6 Kgf/cm²) |
| 46 | Cost of 160 mm Ø PVC End Cap (6 Kgf/cm²) |
| 47 | Cost of TW Safeguard |
| 48 | Cost of 200 X 100 mm diaTW M S Cap |
| 49 | Cost of 80 mm M.S Clamp |
| 50 | Cost of Butterfly valve |
| 51 | Labour charges for pump set, delevery fittings including fittings of sluice Valve, NR Valve, air release valve and riser Teeincluding Cutting Threadingof 100 mm dia. G.I.Pipesetc and installation |
| 52 | Cost of 300 mm R.C.C. hum pipe( NP 3 )as per specificationsincluding laying & fitting |
| 53 | Cost of extra eartwork Exacavation and filling as per norms for road cross, foot path , ridges along the pressure pipeline |
| 54 | Supply all material, labour,T & P and Construction of 11KV 3 phase 3 wireHT line(40mtr average span length) with 9mtr long 300kg PSC pole supported and 55 sqmm AAA conductoras per RE standard and TPCODL specification asper line diagram, including painting in Navy blue colour band with inscription of OLIC etcin eachpole etc complete all as per dirction of EIC.. |
| 55 | Supply all material, labour,T & P and Construction of 11/0.4 KV 25KVA (BIS-LEV-II star rated) double pole mounted sub-station with 9 mtr long 300kg PSC pole supported and90Amp MCCB with all materials required as per RE standard and TPCODL specification and G.I. Chain linking fencing with gate, sand filling and metal spreding etc. complete all as perper dirction of EIC.. |
| 56 | Supply all material, labour,T & P and Construction of3 phase 4 wireLT line(33mtr average span length) with 9mtr long 300kg PSC pole with 3X35+1X25)sqmm AB Cable as per RE standard andTPCODL specification, as per line diagramincluding painting in Navy blue colour band with inscription of OLIC in each pole etc. pole complete allas per dirction of EIC.. |
| 57 | Supplyingall cost of abour , materials and T & P and providingof L T Distribution.Box including installation and fittings ofin the sub station (including 1%cess) |
| 58 | Supplying all materials, labour, T&P and Earthing installationincluding excavation of two nos of earth pits of size 1.2 mtr x1.2mtrx2.5 mtr and filling the earth pit with alternative layer of 0.60mtr x0.60mtr x0.30 mtr of common slat and charcoal around theG.I. pipe (40 mm dia & 6mtr) including allcost of salt, charcoal, 100amp cable socket, soft solder, G.I. nut bolts , 40mm dia G.I.pipe 6 m and No.8 GI Wire 10 Kg including tranportation of materials to site .etc complete all.as per dirction of EIC.. |
| 59 | Supplying all materials, labour, T&P and Electrical Installation & energisation including Wiring , Clipping, andfitting of starter, main switch etc.complete all .as per dirction of EIC.. |
