Tender For Improvement To Songir Sarwad Lamkani Nijampur Road Sh-13 Km.105/00 To 109/00 Tal.Sakri Dist.Dhule
Tender Value
1.55 Crore
Estimated cost
Bid Submission
23 Jan 2024
0 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sakri → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement To Songir Sarwad Lamkani Nijampur Road Sh-13 Km.105/00 To 109/00 Tal.Sakri Dist.Dhule
BOQ
| Sl. No. | Item Description |
| 1 | Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras Etcetera complete. |
| 2 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. |
| 3 | Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50 metre including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller to achieve not less than 97 Percent of standard proctor density Etcetera complete (Material obtained from departmental Land) |
| 4 | Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 metre, not less than 97 Percent of standard Proctor density after laying them in layers of 20 centimetre to 30 centimetre with vibratory roller. |
| 5 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II(Using Screening Type B (11.2 milimetre) Aggregate) |
| 6 | Providing and constructing 75 milimetre thick Modified Penetration Macadam road surface including all materials, preparing the existing road surface, spreading 40 milimetre stone metal layers 100 Percent crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 2 Kilogramme per square metre, spreading 12 milimetre size chips compacting with three wheel static roller having weight 8 to 10 Metric Tonne to achive the desired degree of compaction as per Technical Specification Clause 506 Etcetera complete. Including picking of existing Water Bound Macadam surface. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 7 | Providing and constructing 50 milimetre thick Modified Penetration Macadam road surface including all materials, preparing the existing road surface, spreading 40 milimetre stone layers metal 100 Percent crusher broken metal with conical crusher palnt, heating and spraying the bitumen of specified grade @ 1.75 kilogramme per square metre, spreading 12 milimetre size chips compacting with Static roller having weight 8 to 10 Metric Tonne to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat at the rate of 0.30 KilogrammeSquare metre on existing bitumen surface. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 8 | BITUMINOUS MACADAM:--Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported at site with Vehicle Tracking System, laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 50 milimetre compacted thickness with drum mix type hot mix plant without Supervisory Control and Data Acquisition having complying essential features of Hot mix plant as per Indian Road Congress-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers,automatic synchronization of bitumen and aggregate fedder,built in dust controller system and Programmable logic controller for Drum Mix plant ,Sensor paver,and Vibratory roller including Tack coat etc. complete --Bitumen3.30% of specified grade (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 9 | BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1,premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with Vehicle Tracking System, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 30 milimetre compacted thickness with drum mix plant with Supervisory Control and Data Acquisition, Sensor paver and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen of specified grade with stone dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 10 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 11 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete. |
| 12 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering Etcetera complete. |
| 13 | Providing and fixing 1:2:4 ordinary kilometre as per Indian Roads Congress standard including fixing in standard size Cement Concrete 1:4:8 block including curing, painting lettering Etcetera complete. |
| 14 | Providing and fixing Reinforced Cement Concrete 200 metre stones as per Indian Roads Congress standard including fixing in standard size Cement Concrete 1:4:8 block including curing, painting lettering Etcetera complete. |
| 15 | Providing and fixing cautionary / warning sign board of size 60 centimetre having shape of equilateral triangle with apex point upwards. prepared on 16 gauge Mild Steel sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border / arrow, coated with non pealable crystal clear protective transparent coat retaining 100 Percent reflection including one One Number of Mild Steel Angle iron post of size 50 x 50 x 5 milimetre of 3.65 metre long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 centimetre fixing board and post with 2 Numbers high strength Galvanised Iron bolts and nuts of size 10 milimetre diametre and 20 milimetre long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size etectra complete. 60 centimetre equilateral triangle Mild Steel sheet with Engineering grade, |
| 16 | Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 milimetre thick including 1.5 Refractive index reflectorizing glass beads @ 250 gramme per square metre Thickness of 2.5 milimetre is exclusive of surface applied glass beads as per Indian Roads Congress 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL and QD both according to Indian Roads Congress 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for Indian Roads Congress 35:2015). |
| 17 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 milimetre) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols Etcetera with approved colour shade paint complete, on Mild Steel angle of size 35 x 35 x 3 milimetre frame with properly cross braced Mild Steel angles of size 35 milimetre x35 milimetre x3 milimetre duly painted including Two Mild Steel angle iron posts of size 65 milimetre x 65 milimetre x 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including, excavation, refilling, transportation, and labour Etcetera complete. |
AI Tender Summary
Tender Timeline
Jan 17, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 23, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 25, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender