|
| 1 | Excavation in foundation in ordinary soil (loam,clay or sand )including lift upto 1.50m and lead up to 30 m & including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineers in change upto a distance of 30m from the foundation trenches (4.1.1) Depth from 0.00 to 1.50 m below |
| 2 | Providing and Laying in Position cement concrete with 4cm gauge approved stone ballast coarse sand and cement in the proportion of 8:4:1 including supply of all material labour tools and plants etc required for all completion of work (item code 5.4.3) |
| 3 | B/W with bricks of class 150 in foundation & plinth in CM 1:4(Based on UP PWD SOR 2020) Cement mortar 1:4 ( 1cement :4 Coarse sand) |
| 4 | B/W with bricks of class 150 in Superstructure above plinth in CM 1:4(Based on UP PWD SOR 2020) Cement mortar 1:4 ( 1cement :4 Coarse sand) |
| 5 | Centring and shuttering incl. strutting, propping etc. and removal of form for all heights :Foundations, footings, bases of columns, etc. for mass concrete.(DAR/5.9.1/UPPWDSOR 2020) |
| 6 | Centring and shuttering incl. strutting, propping etc. and removal of form for all heights :Lintel beams plinth beams girders and cantilever DAR/5.9.5/ Based on UPPWD SOR 2020 ) |
| 7 | Centring and shuttering incl. strutting, propping etc. and removal of form for all heights :Column pillars piers abutments posts and struts (DAR/5.9.6/ UPPWD SOR 2020) |
| 8 | Providing and Laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level: (Cast in Situ) 1:1.5:3 (1 Cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size). (DAR/5.1.2/ UPPWDSOR 2020) |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level, excluding cost of centring, shuttering, finishing, and reinforcement: (Cast in Situ) (DAR/5.2.2/UPPWD SOR 2020) 1:11/2:3 (1 Cement: 11/2 coarse sand: 3 graded stone aggregate 20mm nominal size). |
| 10 | Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Cold twisted bars. (DAR/5.22.1 / UPPWD SOR 2020) |
| 11 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 40 mm nominal size) (DAR/11.3.1/UPPWDSOR 2020) |
| 12 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (DAR/10.25.2/UPPWDSOR 2020)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 13 | Providing reinforced bu organic fibers and/or inorganic synthetic fibers cement 6mm thick corrogated sheets (as per IS:14871) roofing up to any pitch and fixing with polymer coated sor l hooks, bolts and nuts 8mm dia G.F. plannard between washer or with self drolly fashra ans cppm washer etc. complete (excluding the cost of piplines roltes and fixtures) including cully sheds to six and shape wherever imp) |
| 14 | providing and fixing ridges and hips in fiber cement reinforcement by organic fibers and/or inorganic synthetic fibers roofing with suitable fixing accessories or self dwelling fastener and EPDM washer Etc. complete Corrugated serrated adjustable ridges |
| 15 | Dry brick on edge flooring in required pattern with bricks of class designation 10.0 on a bed including filling joints with sand with common burnt clay non modular bricks (DAR/11.2/AR/YEIDA) |
| 16 | 15 mm cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement: 6 fine sand) (DAR/13.5.2/UPPWD SOR 2020 ) |
| 17 | 12 mm cement plaster of mix: 1:6 (1 cement: 6 fine sand) (DAR/13.4.2/UPPWDSOR 2020) |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture to give aneven shade |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work Exposed on wall. 32 mm nominal outer dia. Pipes. (DAR/18.8.4/UPPWDSOR2020) |
| 20 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore (DAR/18.18.1/UPPWDSOR 2020) |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride .....direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal outer dia.Pipes. (DAR/18.18.2/UPPWDSOR 2020) |
| 22 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover (DAR/10.7/UPPWDSOR 2020) |
| 23 | Providing & fixing commisoining of single phase submersible pump set in bore well suitable for 451pm discharge 25 mtr to 70 mtr head minimum two star rating of approved make Make PVC cables (3 H. P. SINGLE PHASE) |
| 24 | Providing and laying 80 mm thick factory made cement concrete interlocking paver block (ISI Marked) made by block making machine with strong vibratory compaction of approved size design, shape, laid in required color and pattern over and including average 50 mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per direction of Engineer -in-charge with conforming (UP PWD SOR 2020) (New SOR Based DSR 16.68) |
| 25 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with Vibratory power roller to achieve the desired density, complete as per clause 401 (Based on SOR UP PWD 2020) |
| 26 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :| 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank (DAR/18.48/UPPWD SOR 2020) |
| 27 | Providing corrugated col. Coated G.S. sheet for wall including Horizontal surface fixed with polymer coated jorl, hooks, boalts and nuts including a coat of app. Steel primier and two coat of paint on overlapping of sheets complete (upto any in horizontal/ vertical or curved surface) excluding the cost of vertical post or as per dir. of E/I |
| 28 | Supplying and fixing of indian mark handpump including making chabutra of dia 2mtr and 45 mtr lowering (depth) and pvc assembling blinding pipe straner and 63 mm/110 mm dia pvc pipe etc. |
