Tender For A. Repair And Replacement Of Electrical Wiring And Illumination System For Inspection Bungalow With Led Type Lightening System Within Project Areas Of Mungpoo Kalikhola Hydel Power Station, Under Mini Micro Hydel Division, Kurseong Dist- D
Tender Value
5.13 Lakhs
Estimated cost
Bid Submission
06 Feb 2024
0 days left
EMD
10263
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
A. Repair And Replacement Of Electrical Wiring And Illumination System For Inspection Bungalow With Led Type Lightening System Within Project Areas Of Mungpoo Kalikhola Hydel Power Station, Under Mini Micro Hydel Division, Kurseong Dist- Darjeeling.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing sheet steel main switches on angle iron frame on wall. Havells: 60/63A, 415V TPN with fuse on L&N. Pg-(D1-1b) |
| 2 | Supplying and fixing double door SPN MCBdistribution board with IP-42/43 protection concealed in wall after cutting the wall and mending good damages to original finish including interconnection with suitable size of copper wire and neutral link and provision for earthing attachment.Legrand 2+16way. Pg-(D9-13) |
| 3 | Supplying and fixing double door SPN MCBdistribution board with IP-42/43 protection concealed in wall after cutting the wall and mending good damages to original finish including interconnection with suitable size of copper wire and neutral link and provision for earthing attachment. Legrand 2+8way. Pg-(D9-13) |
| 4 | Suppling and fixing 240/415V MCB of breaking capacithy 10kA and C characteristics ondin rail of existing distribution board and necessary connection.(1) Havells (6-32)A, SP .Pg-(D6-7) |
| 5 | Suppling and fixing 240/415V MCB of breaking capacity 10kA and C characteristics ondin rail of existing distribution board and necessary connection. (2) Havells (6-32)A, DP.Pg-(D6-7) |
| 6 | Supplying and fixing 240/415V MCB isolator in din rail of existing DBs and necessary connection.(1) Legrand 63A,FP. Pg-(D5-6) |
| 7 | Dist. Wiring in 1.1 kV grade 2*22/0.3 (1.5 sq.mm,) single core stranded FR PVC insulated and unsheathed Cu. Wire (Brand approved by EIC) in suitable size PVC casing capping single core stranded FR PVC insulated and unsheathed Cu. Wire(Presision Make) with 1*22/0.3 (1.5sqmm)single core stranded FR PVC insulated and unsheathed Cu. Wire for ECC incl. necessary fitting etc to fan/light/call bell pooint with modular type switch fixed on modular GI/PVC switch board with top cover plate on wall incl. mending good damages to original finish (PVC casing capping with S/B both on surface.(c) Average run 08 Mtrs. Pg-(E21-H 1C ) |
| 8 | Dist. Wiring in 1.1 kV grade 2*22/0.3 (1.5 sq.mm,) single core stranded FR PVC insulated and unsheathed Cu. Wire (Brand approved by EIC) in suitable size PVC casing cappping single core stranded FR PVC insulated and unsheathed Cu. Wire(Presision Make) with 1*22/0.3 (1.5sqmm)single core stranded FR PVC insulated and unsheathed Cu. Wire for ECC incl. necessary fitting etc with S&F 6A 5 pin modular type plug socket and switch fixed on 4 module GI switch board with 3/4 module top cover plate flushed in wall incl. necy. connection making earth attachment .(e)Average run 7.5 mtrs. Pg(E22-6E) |
| 9 | Supplying and fixing 240V,16A,3pin modular type plug socket (Brand approved by EIC) without plug top and switch on existing GI modular type switch board with top cover plate and making necy. Connections with PVC Cu. Wire and earth contuinity wire etc. Pg-(E17-4b) |
| 10 | S&F GI modular switc board of following sizes complete with three nos. Suitabel size copper bar with holes (for PH.,E & N) fixed on bakelite/hard rubber insulator over the MS welded chairs incl. Top cover flushed in wall for housing the board after cutting the brick wall for housing the board ager cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. (a) 4 module.Pg-(E17-1a) |
| 11 | S&F GI modular switch board of following sizes complete with three nos. Suitabel size copper bar with holes (for PH.,E & N) fixed on bakelite/hard rubber insulator over the MS welded chairs incl. Top cover flushed in wall for housing the board after cutting the brick wall for housing the board ager cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. (b) 6 module.Pg-(E17-1b) |
| 12 | S&F GI modular switch board of following sizes complete with three nos. Suitabel size copper bar with holes (for PH.,E & N) fixed on bakelite/hard rubber insulator over the MS welded chairs incl. Top cover flushed in wall for housing the board after cutting the brick wall for housing the board ager cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. (c) 8 module.Pg-(E17-1c) |
| 13 | S&F GI modular switch board of following sizes complete with three nos. Suitabel size copper bar with holes (for PH.,E & N) fixed on bakelite/hard rubber insulator over the MS welded chairs incl. Top cover flushed in wall for housing the board after cutting the brick wall for housing the board ager cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. (d) 12 module.Pg-(E17-1d) |
| 14 | S&F 240V,16A piano key type switch(Brand approved by EIC) pm GI modular type switch board having top cover plate and making necessary connections as required. Pg (E-17,3b) |
| 15 | S&F 240V,5A piano key type switch(Brand approved by EIC) pm GI modular type switch board having top cover plate and making necessary connections as required. Pg (E-17,3a) |
| 16 | Dist. wiring in 1.1kV grade single core stranded FR PVC insulated and unsheathed Cu. Wire (Brand approved by EIC) of following sizes in 25 mm PVC casing capping (Presiciion make) incl. necessary PVC clips, fitting etc. (2) 2*36/0.3 (2.5 sq.mm) + 1*22/0.3 (1.5sq.mm). Pg-(E11-D1) |
| 17 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc as practicable as possible and providing necy.length of PVC insulated wire and making connection for exhaust of following diameter.(1 )23cm(9\"). Pg-(C4-28 A) |
| 18 | Fixing only cabin fan on wall / ceiling by S&F rag bolts, nuts, washers(16mm dia*62mm long) or as required incl. S&F 24/0.20 PVC insulated glexible Cu. Wire 0.5 Mtr length.Pg-(C4-29) |
| 19 | Fixing only call bell/ buzzer on single HW board on wall incl. S&Fsingle HW board.Pg-(C2-9A) |
| 20 | Fixing only lamps. Pg-(C2-11) |
| 21 | Fixing only pendent light fitting complete with lamp, shade and 24/0.2 mm (1.5 sq. mm) flexible Cu. Wire incl. S&F pendent holder.Pg-(C2-12) |
| 22 | Fixing only single / twin florescent light fitting complete with all accessories directly on wall / ceiling with HW block and suitable size MS fasteners, ceiling plate, nipple etc as required.Pg-(C2-14D) |
| 23 | Fixing only flood light fitting with suitable tie-clamps and MS plate for mounting on pole/tower or similar structure.Pg-(C3-20) |
| 24 | Fixing only louvers shutter/cowl on wall with necessary bolts & nuts (6mmdia*6mm long). (a) For 23cm(9\") exhaust fan.Pg-(C4-30A) |
| 25 | Supplying only multi tune call bell.(Anchor/Equivalalent make). Pg-(K-25) |
| 26 | Supplying only Aluminium louver shutter 9\". Pg-(K-33) |
| 27 | Supplying only angular batten holder.Pg-(K-28) |
| 28 | Supplying of Pendent holder.Pg-(K-30) |
| 29 | Supplying of Danger Board (20cm*30 cm) |
| 30 | Earthing with 50mm dia GI pipe 3.64mm thick*3.04 mtrs long and 1*4 SWG GI(Hot dip) wire (4 mtrs. Long),13mm dia*80 mm long GI bolts, diuble nuts,double washers incl. S&F 15mm dia GI pipe protection (1mtr long) to be filled with bitmen partly under the fround level and partly under the ground level and partly above ground level driven to an average depth of 3.65 mtrs below the ground level as below. (a) By ISI-medium GI pipe. Pg-(G1-2a) |
| 31 | Connecting the equipments to earth busbar including S&F GI (Hot Dip) wire of size as below on wall /floor with staples buried inside wall/floor as required and making connection to equipments with bolts,nuts,washers,cable lugs etc. as required and mending good damage.Solid GI wire No. 10 SWG .Pg-(G2-5a) |
| 32 | 15% extra to the rate for Darjeeling Dist for line items1 to 31 |
| 33 | GLAZE - 1N X 9W LED LAMP |
| 34 | BAJAJ FRESHEE 4 BLADE EXHAUST FAN |
| 35 | CROMPTON GREAVES WINDFLO 12 |
| 36 | BAMBOO LED BOLLARD-BAMBOO LS 8W LED830PSYMTOPC |
| 37 | E-LITE LED PRIDE/NXT Tube light 9W LED 6500K |
| 38 | LED ADORE PLUS 7W B22 CDL 3 STAR LAMP |
| 39 | LED ADORE PLUS 9W B22 CDL 3 STAR LAMP |
| 40 | ARCH 1 GATE LIGHT- Upto 1N*60W LED Lamp |
| 41 | FLORENTINE WL 1LS B22 SS- 1N* 9W LED Lamp |
| 42 | NIMBUS-UPTO 7.5W A60 LED Filament lamp Black |
| 43 | RUGBY GENX 10- RUBGYGENXFTS10WLED865SSYMBOPC |
| 44 | SUPERB STREET LIGHT-30W LED 6500K. |
| 45 | JETA QUANTO PLUS-JETAQUANTOPLUSFLP50WLED757SYMLENS |
| 46 | WATER GYESER :BIANCA GHWCBNTWH015,15L |
| 47 | JHUMAR |
AI Tender Summary
Tender Timeline
Jan 17, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 06, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 10, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender