Tender For Purchase Of Instruments(Suman), pimpri-Maharashtra

Tender For Purchase Of Instruments(Suman) Purshase Of Instruments ( Suman ) , Delivery Tables / Labour Table Technical Specification- • Overall Dimension : Overall Approx. Maximumsize: 1860Mm-1870Mm L ( When Extended ) × 900Mm W × 800Mm H Approx.. •Table Tubular Base Should Be Made Of 31.75Mm Dia × 16G Ss Tubes With Horizontal Lengthwise Support Stay Of 25Mm × 16G Ss Tubes. • The Formal Stay Should Join These Lengthwise Stay In Such A Way So As To Facilitate The Obstetrician To Stand Or Sit Close To The Table. • Top Should Be Made In 3 Sections Fabricated Mainly Out Of 18G Ss Sheets. • Backrest Section Sizes 750 Mm × 625Mm Approx. Should Be Welded On 25Mm Dia. Ss Tube 16G Hinged On 45Mm Long × 25Mm W × 5Mm Thick Ss Flat Pieces Welded To The Horizontal Supports. • The Backrest Should Be Adjusted On Minimum 4 Different Inclinations By Means Of Ratchet Arrangement Which Should Consist Of 12Mm Dis Ss Rod Supported On Ss Flat 32Mm × 5Mm Thick Size. • Middle Section 350Mm × 655Mm Approx.Should Be Made Of 18G Ss Sheet With Reinforced • Trapezoida Recess Which Should Admeasure Effective 200Mm Inside, 265Mm Outside, 130Mm Deep Size Approx. • Leg Section Should Admeasure 695Mm × 595Mm Approx. And Should Be Made Of 18G Ss Sheet Welded On 25 Mm Dia. × 16G Tubes Itshould Have Suitable Sliding Arrangement. • The Entire Table Top Should Give Trendelburgposition By Gas Spring System In Step Less Instantaneous Manner. • The Removal Safety Side Railings Of Approx.Size 685Mm × 200Mmh Approx. Should Be Made Of 12Mm Dia Ss Rods Fitted On Head End And On Both Sides • Double Bent Rubber Paddle Lithotomy Rods Should Be Made Of 12Mm Dis. S.S. These Should Be Adjusted By 2 Clamps Levers Of 10Mm Dia. S.S. Total Rod Having Arm Length Of 100Mm. Supplied With A Pair Of Leg Belt. • Patient’S Bearing Down Handgrip Should Be Made Of 22Mm Dis. 18G Ss Tube Fixed With Pvc Handleand Should Have Location Adjustability For Patient’S Convenience. •The Entire Trendelenburg Arrangement Should Bemounted On Rectangular Frame Of Size 60Mm × 30Mm × 16G With One 40Mm × 20Mm × 16G Rectangular S.S. Tube Support. •Waste Collecting S. S. Bowl Should Be Provided And Should Rest On S.S. Bracket Made Of Not Less Than 9.5Mm Dia S.S. Rod. • One Number Of S.S. Tel. Saline Rod With 12Mm Dia. S.S. Should Rest On S.S. Should Be Provide Which Be Adjustable In S.S. Tubular Socket. •All Stainless Steel Wherever Used Should Be 304 Grade. • Mattress – 25Mm Thick Mattress Should Be Made Of Foam Cushion, Fully Covered With Rexine. • Power Coating Shall Pass Requirement Specified In Table 1 Of Is 13871 Of 1993. •This Finish Should Exclude Stainless Steel Parts, Some Hardware, Eboplle Rubber, Pvc, Castor Wheels, If Any. • Shall Be Of 304 Grade-Conforming To Is 69111992 , Mattress For Delivery Table Technical Specification- • Shape: Rectangular. • Bowl Material: Stainless Steel. • Mattress Material: Pvc. • No. Of Sections: 3. • Mattress Color: Black. • Dimensions: 72 Mm ( L ) * 22 Mm ( W ) * 30 Mm ( H ) , Neonatal Resuscitation Kit Technical Specification- • Foot Suction With Silicone Tube • Silicone Resuscitator Infant ( 500Ml ) • Laryngoscope Set With 0, 1 No. Miller Blades • Airways Size : 00, 0, 1 No. • Silicone Mask Size : 0, 1 No. • Oxygen Tube • Optional : Laryngeal Mask Airways & E.T Tube , Delivery Trays Technical Specification- • Material Should Be Medical Grade • Should Be Isi / Bis / Ce / Iso Certified. , Oxygen Cylinder With Opener ( D Type ) Technical Specification- • It Should Be A Standard ‘D Type Molybdenum Steel Cylinder. • The Capacity Should Be Of Approx 7 Cu Mt. At Pressure Of 1800 - 2000Ibs / Square Inch. • A Pressure Regulator / Flow Meter Capable Of Reducing The Pressure To Appropriate Level To Run Either A Ventilator Or Provide Oxygen Therapy. •Should Be Seamless • The Capacity Should Be Of 5000 To 6000 Liters At Pressure Of 1800 - 2000Ibs / Square Inch • Matching Key Cum Spanner To Release Oxygen For Each Cylinder Separately Or Modern Valve And Regulator. Cylinder Should Have Isi Mark And Iso Certificate For Quality Standard Or Bis Equivalent; Is 3224. Cylinder Should Have Explosive Safety Certificate And Should Be Provided Along With Each Cylinder During Installation • Certificate Of Calibration, Peso Certificate And Inspection From The Factory , Foot Operated Suction Machine Technical Specification- • It Should Have Maintainence Free Piston / Cylinder Technology With Should Be Heat Resistant Withhigh-Tech Material For Long Lasting Dependable Operations. • It Should Have Two Autoclavable Psu ( Polysulfone ) Jars Of • Liters With A Change Switch From One Jar To Another. • It Should Be Noiseless And Vibration Free. • It Should Have High Flow Of At Least Sixty Liters Per Minute With -95Kpa ( -713Mmhg ) . • It Should Have Provision Of Variable Flow Rate Of 40L / 50L / 60L. • It Should Have A Large Vacuum Gauge In Kpa And Mmhg With Easy To Turn Membrane Vacuum Regulator To Set Precise Vacuum Levels. • It Should Also Have A Foot On / Off Switch For Hands Free Operation. • It Should Have Sleek Design And Sleek Trolley With Antistatic Castors With Brakes. • It Should Be Made With High Quality Housing Material. • Should Be Iso / Ce Certified , Digital Weighing Machine Technical Specification- • Should Be Dial Type Having A Magnifying Lens To See The Measurement. • Should Measure A Maximum Weight Of 150Kgs. • Should Have Zero Adjustment. • Should Bear Certification For Each Machine By Department Of Legalmetrology / Weight & Measurement Department Of India. The Tenderer Shall Submit Copy Of Model Approval Issued By Govt. Of India, Legal Metrology Department Along With Technical Bid. • Should Be Round Shape Of Diameter 300Mm ( Minor Variations Will Be • Accepted ) • Shall Be Made Of Metal, Epoxy Powder Coated With Rust Proof Parts. • Iso, Ce Certification , Pulse Oxymeter Technical Specification- • Should Have At Least 4.3 Colortft Display • Should Be Compact And Portable In Design • Should Work With Ac Power And With Built In Lithium Battery • Should Have Adjustable Audio And Visual Alarms • Shoud Have 36 Hours Patients Trend Data • Should Be Applicable To Adult, Pediatric And Neonatal Patients • Should Have Printer As Ptional And The Price For The Same To Be Quoted As Optional • Contineous Real Time Display Of Spo2, Pr, Plethysmograph • Should Have Spo2 Measurement Range From 0-100% • Should Be Ce Certified , Folding Wheel Chair Technical Specification- • Overall Approx Size:670Mmw X 1120Mm D X 920Mm H. • Should Be Foldable Frame. • Should Be Abs Armrest. • Should Befoldable / Detachable Footrest. • Should Be Dual Brake System. • Materials Should Be Stainless Steel. • Should Be Seat – Fabric Seat With Foam. • Should Be Backrest – Fabric Backrest With Foam. • Should Be Front Wheels -8” Solid Wheels, Rear Wheels 24” Pneumatic. • Should Be Iso Certification , Led Stand Lamp Technical Specification- • Control Unit: Smps • Color Temperature: 4300 K • Focus Diameter: 15-25 Cm • Light Intensity: 1, 20, 000 Lux • Light Head Size: 60 Cm • Illuminating Adjustment: 10% - 100 % • Height Adjustment: 120 Cm • Depth Of Illumination: 110 Cm • Number Of Leds: 72 • Life Span Of Led: 50, 000 Hrs. • Color Rendering Index: 92 • Total Power Consumption: 40 W • Power Supply: 160V-240V Dc, 50Hz • Should Beiso, Ce Certified , Dreesing Drumssize 9*11 Technical Specification- • Should Be Ss 304 • Should Be Seamless • Should Be Iso / Ce Certified , Foetal Doppler Technical Specification- • Should Be Compact, Table Type And Light Weight. • Large Lcd Display For Display Of Fetal Heart Rate. • Back Light For Better Visibility • Display Signal Quality, Low Battery, Etc., • High Sensitivity Doppler Probe Of Frequency 2.0 Mhz • Ultra Sound Intensity ‹10Mw / Cm2.. • Built-In Speaker With Output Not Less Than 1.0W • Should Work On Rechargeable Batteries With Minimum Battery Time Of 300Minutes. • Battery Charger And Spare Set Of Batteries Aa Type To Be Supplied. • Volume Control Facility And Audio Output For Ear Phone Should Be Available. • Heart Rate Range Should Be From 50 To 240 Bpm With Accuracy Of + / -2% • Should Be Water Proof Body. • Should Have Facility For Fhr Data Transfer To Pc. • Doppler Probe Should Be Light Weight With Holder Facility When Not In Use. • Should Be Supplied With Carrying Case. • Machine Should Be Iso Mark

Refer document

Refer document

Refer document

Name of Work: Purshase of Instruments(SUMAN)

Sl. No.	Item Description
1	Purshase of Instruments(SUMAN)
2	Delivery Tables/ Labour Table Technical Specification- • Overall dimension : Overall approx. maximumsize: 1860mm-1870mm L (when extended) × 900mm W × 800mm H approx.. •Table tubular base should be made of 31.75mm dia × 16G SS tubes with horizontal lengthwise support stay of 25mm × 16G SS tubes. • The formal stay should join these lengthwise stay in such a way so as to facilitate the obstetrician to stand or sit close to the table. • Top should be made in 3 sections fabricated mainly out of 18G SS sheets. • Backrest section sizes 750 mm × 625mm approx. should be welded on 25mm dia. SS tube 16G hinged on 45mm long × 25mm W × 5mm thick SS flat pieces welded to the horizontal supports. • The Backrest should be adjusted on minimum 4 different inclinations by means of ratchet arrangement which should consist of 12mm dis SS rod supported on SS flat 32mm × 5mm thick size. • Middle section 350mm × 655mm approx.Should be made of 18G SS sheet with reinforced • Trapezoida recess which should admeasure effective 200mm inside, 265mm outside, 130mm deep size approx. • Leg section should admeasure 695mm × 595mm approx. and should be made of 18G SS sheet welded on 25 mm dia. × 16G tubes itshould have suitable sliding arrangement. • The entire table top should give trendelburgposition by gas spring system in step less instantaneous manner. • The removal safety side railings of approx.Size 685mm × 200mmH approx. should be made of 12mm dia SS rods fitted on head end and on both sides • Double bent rubber paddle lithotomy rods should be made of 12mm dis. S.S. These should be adjusted by 2 clamps levers of 10mm dia. S.S. total rod having arm length of 100mm. Supplied with a pair of leg belt. • Patient’s bearing down handgrip should be made of 22mm dis. 18G SS tube fixed with PVC handleand should have location adjustability for patient’s convenience. •The entire Trendelenburg arrangement should bemounted on rectangular frame of size 60mm × 30mm × 16G with one 40mm × 20mm × 16G rectangular S.S. tube support. •Waste collecting S. S. bowl should be provided and should rest on S.S. bracket made of not less than 9.5mm dia S.S. rod. • One number of S.S. Tel. saline rod with 12mm dia. S.S. should rest on S.S. should be provide which be adjustable in S.S. tubular socket. •All stainless steel wherever used should be 304 grade. • Mattress – 25mm thick mattress should be made of foam cushion, fully covered with rexine. • Power coating shall pass requirement specified in table 1 of IS 13871 of 1993. •This finish should exclude stainless steel parts, some hardware,eboplle rubber, PVC, castor wheels, if any. • Shall be of 304 grade-conforming to IS 69111992
3	Mattress for Delivery Table Technical Specification- • Shape: Rectangular. • Bowl Material: Stainless Steel. • Mattress Material: PVC. • No. of Sections: 3. • Mattress Color: Black. • Dimensions: 72 mm(L) * 22 mm(W) * 30 mm(H)
4	Neonatal Resuscitation Kit Technical Specification- • Foot Suction with Silicone Tube • Silicone Resuscitator Infant (500ml) • Laryngoscope Set with 0,1 No. Miller blades • Airways Size : 00, 0, 1 No. • Silicone mask Size : 0, 1 No. • Oxygen Tube • Optional : laryngeal Mask Airways & E.T Tube
5	Delivery Trays Technical Specification- • material should be medical grade • should be ISI/BIS /CE/ISO Certified.
6	Oxygen Cylinder with opener (D Type) Technical Specification- • It should be a standard ‘D" type molybdenum steel cylinder. • The capacity should be of approx 7 cu mt. at pressure of 1800 - 2000ibs/square inch. • A pressure regulator/flow meter capable of reducing the pressure to appropriate level to run either a ventilator or provide oxygen therapy. •should be seamless • The capacity should be of 5000 to 6000 Liters at pressure of 1800 - 2000ibs/ square inch • Matching key cum spanner to release oxygen for each cylinder separately or modern valve and regulator. Cylinder should have ISI mark and ISO certificate for quality standard or BIS equivalent; IS 3224. Cylinder should have explosive safety certificate and should be provided along with each cylinder during installation • Certificate of Calibration, PESO certificate and inspection from the factory
7	Foot Operated Suction Machine Technical Specification- • It should have maintainence free piston/ cylinder technology with should be heat resistant withhigh-tech material for long lasting dependable operations. • It should have two autoclavable PSU (Polysulfone) jars of • liters with a change switch from one jar to another. • It should be noiseless and vibration free. • It should have high flow of at least sixty liters per minute with -95kPa (-713mmHg). • It should have provision of variable flow rate of 40L/50L/60L. • It should have a large vacuum gauge in kPa and mmHg with easy to turn membrane vacuum regulator to set precise vacuum levels. • It should also have a foot on/ off switch for hands free operation. • It should have sleek design and sleek trolley with antistatic castors with brakes. • It should be made with high quality housing material. • should be ISO/ CE Certified
8	Digital Weighing Machine Technical Specification- • Should be dial type having a magnifying lens to see the measurement. • Should measure a maximum weight of 150kgs. • Should have zero adjustment. • Should bear Certification for each machine by department of legalmetrology/ Weight & Measurement department of India. The tenderer shall submit copy of model approval issued by Govt. of India, Legal Metrology department along with technical bid. • Should be Round shape of diameter 300mm (minor variations will be • accepted) • Shall be made of Metal, epoxy powder coated with rust proof parts. • ISO, CE certification
9	Pulse Oxymeter Technical Specification- • Should have at Least 4.3" ColorTFt Display • Should be Compact and Portable in Design • Should work With AC power and with Built in Lithium battery • Should have Adjustable Audio and Visual alarms • Shoud have 36 Hours Patients Trend Data • Should be Applicable to Adult, pediatric and Neonatal patients • Should have Printer as ptional and the price for the same to be Quoted as Optional • Contineous Real time Display of SPO2, PR, Plethysmograph • Should have Spo2 Measurement range from 0-100% • Should be CE Certified
10	Folding Wheel Chair Technical Specification- • Overall approx size:670mmW x 1120mm D x 920mm H. • Should be Foldable frame. • Should be ABS armrest. • Should beFoldable /detachable footrest. • Should be Dual brake system. • Materials Should be stainless steel. • Should be Seat – fabric seat with foam. • Should be Backrest – fabric backrest with foam. • Should be Front wheels -8” solid wheels, rear wheels 24” pneumatic. • Should be ISO Certification
11	LED Stand Lamp Technical Specification- • Control Unit: SMPS • Color Temperature: 4300 K • Focus Diameter: 15-25 cm • Light Intensity: 1,20,000 Lux • Light Head Size: 60 cm • Illuminating Adjustment: 10% - 100 % • Height Adjustment: 120 cm • Depth Of Illumination: 110 cm • Number of LEDs: 72 • Life Span of LED: 50,000 hrs. • Color Rendering Index: 92 • Total Power Consumption: 40 W • Power Supply: 160V-240V DC, 50Hz • Should beISO,CE Certified
12	Dreesing DrumsSize 9*11 Technical Specification- • Should be SS 304 • Should be Seamless • should be ISO/ CE Certified
13	Foetal Doppler Technical Specification- • Should be Compact, Table Type and Light Weight. • Large LCD Display for Display of Fetal Heart Rate. • Back Light for Better Visibility • Display Signal Quality, Low Battery, etc., • High sensitivity Doppler probe of frequency 2.0 MHz • Ultra sound Intensity ‹10mw/cm2.. • Built-in Speaker with Output not less than 1.0W • Should work on Rechargeable Batteries with Minimum Battery Time of 300Minutes. • Battery Charger and Spare set of Batteries AA type to be supplied. • Volume Control Facility and Audio Output for Ear Phone should be available. • Heart Rate Range should be from 50 to 240 bpm with accuracy of + /-2% • Should be Water Proof Body. • Should have Facility for FHR Data transfer to PC. • Doppler Probe should be Light Weight with Holder Facility when not in use. • Should be supplied with Carrying Case. • Machine should be ISO mark