Military Engineer Services-MES has published Tender For Additional/Alternator Cum Special Repair To Offers, Jcos Or Md Accommodation At Gopalpur Mil Station.. Submission Date for this Tender is 12-03-2024. Mobile Generator Tenders in gopalpur Odisha. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Feb-2024 | Corrigendum No 01 | Date | 27-02-2024 |
| 2 | 19-Feb-2024 | Corrigendum No 02 | Date | 05-03-2024 |
| 3 | 24-Feb-2024 | Corrigendum 03 | BOQ | 05-03-2024 |
| 4 | 05-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-03-2024 |
| Sl. No. | Item Description |
| 1 | SCHEDULE "A": |
| 2 | Item No 01 : Demolition of brick work built in cement mortar including all quions, arches, pillars etc all as specified and directed |
| 3 | Item No 02 : M & L for brick work with sub class "B" brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed. |
| 4 | Item No 03 : M & L for brick work with fly ash modular bricks straight or curved on plan exc 6m mean radius in CM 1:4 including demolation of brick work or stone/ boulder masonry, built in cement mortar completed all as specified and directed. |
| 5 | Item No 04 : M&L for Post construction Anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2to match the existing floors complete all as specified and directed. |
| 6 | Item No 05 : M&L for Treatment of soil using emulsion for Post construction Anti termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in plinth protection or apron complete all as specified and directed. |
| 7 | Item No 06 : M&L for Post construction Anti termite Treatmentat points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltr per hole by drilling 6mm dia holes at a downward angle of 45°@ 150mm centre to centre and sealing the same complete all as specified and directed |
| 8 | Item No 07 : M&L ATT for Switch boards including removing the cover carefully and inserting adequate amount of chemical (powder) and closing the cover complete all as specified and directed |
| 9 | Item No 08 : Taking up or down steel tubing and connections, including cleaning for re-fixing of 15 mm bore of pipe complete all as specified and directed. |
| 10 | Item No 09 : Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm bore of pipe complete all as specified and directed. |
| 11 | Item No 10 : S & F 16 mm bore outer dia of pipes 3 layer PP-R concealed pipes SDR 7.4 (PN 16) UV stablised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded poly propylene randomfittings fixed complete to walls, ceilings or in floors complete all as specified and directed. |
| 12 | Item No 11 : S & F 20 mm bore outer dia of pipes 3 layer PP-R pipes SDR 7.4 (PN 16) UV stablised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded poly propylene random fittings complete to walls, ceilings or in floors complete all as specified and directed. |
| 13 | Item No 12 : M & L for cuttingin brick wall for concealed GI tubing and making good in CM 1:4n.exc 10 cm in girth complete all as specified and directed. |
| 14 | Item No 13 : Demolition of Reinforced Cement Concrete of any description and in any position not otherwisespecifically provided for shelves, lintels etc complete all as specified and directed. |
| 15 | Item No 14 : M&L for Reinforced cement concrete 1:2:4 Type B1 (20 mm graded aggregate) Slabs supported on walls,beams and columns in floors,roofs, landings, balconies , canopies,deck slabs and inshelves complete all as specified and directed(For Kitchen, Almirah like). |
| 16 | Item No 15 : Use and waste ofFormwork to soffits of suspended slabs rough finished surfaces of concrete flat such as roof slabs, chajjas, floor slabs, chajjas landings and similar work; not exceeding 200mm thit, etc. complete all as specified and directed. |
| 17 | Item No 16 : Use and waste ofFormwork to edges (rough finished surfaces of concrete) of concrete flats, chajjas, slabs, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide. complete all as specified and directed. |
| 18 | Item No 17 : M&L for Providing precast cement concrete 1:2:4 Type B1 set in CM 1:6 (20 mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary formwork complete all as specified and directed |
| 19 | Item No 18 : M & Lfor RCC 1:2:4,type B1 using 20mm graded stone aggregate in RCC lintel, shelves, hold fast blocks etc.complete all as specified and directed. |
| 20 | Item No 19 : Use and Waste ofFormwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 21 | Item No 20 : M & L for Mild steel TMTbars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipss complete all as specified and directed. |
| 22 | Item No 21 : M & L for Mild steel TMTbars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipss complete all as specified and directed. |
| 23 | Item No 22 : Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqmcomplete all as specified and directed. |
| 24 | Item No 23 : Taking down chowkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each complete all as specified and directed. |
| 25 | Item No 24 : S & F second class hard wood (Sal)plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed. |
| 26 | Item No 25 : M & L for preparing surfaces of wood and wood based materials,steel and iron work new or old of any description and girth, not otherwise described, and treated with tar or coal tar black paintcomplete all as specified and directed. |
| 27 | Item No 26 : M & Lfor Cutting holes exc half brick but n.exc one brick in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required. |
| 28 | Item No 27 : S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 29 | Item No 28 : S & F 35 mm thick second class hard wood rail and style plain, framed, factory made panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stiles are as per IS – 1003 (Part – I), kiln seasoned & chemically pressure treated complete all as specified and directed. |
| 30 | Item No 29 : S & F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc divided into square, with plain,chamfered or rounded, mitred and rebated sash bars any numbers all as specified under clause 8.24(a) of SSR Pt-I, complete all as specified and directed. |
| 31 | Item No 30 : S & F 100x50mm single rebated factory made, 100% solid WPC (Wood polymer Composite) paintable door frame madefrom 100% lead free (Single Extruded Process) material with density not less than 780 kg/cumcomplete all as specified and directed. Note : (a) Door frame shall be water proof , termite proof , fire retardant and having excellant screw holding capacity. (b) Rate for this item includes Material and labour for fixing of frame with minimum 6 Nos of hold fasts/ Dash through bolt of suitable size as directed by Engineer-in -charge |
| 32 | Item No 31 : S & F 30mm thick factory made PVC panelled door shutter consisting of Stiles/Rails made out of heat moulded 5mm thick prelaminated PVC sheet of density 600 kg/cum and MS rectangular hollow tube of 40 x 20mm of guage 19 with size of member as gven below. Edges/corners of stile/rail chamfered towards panel and panel consisting of 02 Nos panel of 10mm thick (5mm + 5mm) prelaminated PVC sheet of density 600kg/cum complete all as specified and directed. Sizes of members:- (a) Stiles - 110mm x 30mm (b) Bottom / Top Rail - 135mm x 30mm (c) Lock Rail - 145mm x 30mm |
| 33 | Item No 32 : Supply and fixing factory made UPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 34 | Item No 33 : Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) Area not exceeding 2.00 sqm each |
| 35 | Item No 34 : S & F framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 36 | Item No 35 : M & L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 37 | Item No 36 : S & F Stainless steelwire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed. |
| 38 | Item No 37 : S & F 150 mm MS ordinary rat tail rod pattern spring including roller & roller platecomplete as directed. |
| 39 | Item No 38 : S & F 200mm long alumunium anodised barrel tower bolts of extruded section complete all as specified and directed |
| 40 | Item No 39 : S & F stainless steel Butt hinges "medium weight" steel 100mm size as directed. |
| 41 | Item No 40 : S & F extruded alumunium handle fabricated type anodised 150mm long as directed. |
| 42 | Item No 41 : S & F aluminumalloyanodized sliding door bolt 300mm long with hasp and staple (bolttype) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified. |
| 43 | Item No 42 : M & Lforpreparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete as directed. |
| 44 | Item No 43 : S & F in repair kitchen cabinet & CB shutter with frame and shelves made of solid uPVC foam profile withhomogenoud fine cellular structure having smooth outer integral skin having 45mm width and 18 mm thickness as vertical & horizontal stiles , joints are made and shall be fixed to walls using required size sheet metel screw and solvent adhesive vertical and horizontal profile made of UPVC profile frame of size 35mm x 17mm. the panel shall be filled with accucel polank profile of size 250mm width and 6mm thick complete all as specified by manufacturer instruction and as directed. |
| 45 | Item No 44 : S & F 40 mm dia, cupboard knobs polished, hard wood knobs fixed with screws for kitchen cabinet & below platform complete all as specified and directed. |
| 46 | Item No 45 : S & F Continuous (piano) hinges of size of flap 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as specified and directed |
| 47 | Item No 46 : S & F Magnet Ball catches with 8mm dia steel ball, and brass body and striking plate for cup board / cabinet shutters complete all as specified and directed |
| 48 | Item No 47 : S & F 100mm size aluminium handle fabricated type anodised complete all as specified and directed. |
| 49 | Item No 48 : S & F 100mm size aluminium anodised hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 50 | Item No 49 : Demolition of sunken slab floor of WC and Bathincluding WC trap etc and providing Water proofing treatment of sunken slab in following sequence complete :- (a) 15 mm thick renderingon vertical sides of RCC slab in cement mortar 1:3 mixed with water proofingchemical PIDIPROFF LW of Dr. Pidilite or equivalent approved as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and removeall surface imperfections . (c) Fixing 40 mm dia PVC Pipe 450 mm long at bottom of the sunken and Wraping of bathseal tape on the pipes inserted through walls to floor area and seal it. (Bath seal tape product of Dr. Pidilite or equivalent approved and grouting around the insertedpipes by porableDr. Pidilite bathsealor equivalent approved grout as directed. (d) Make angle fillets by mixing cement sand and Dr. Fixit pidicrete URP or equivalent approved on all corners. (e) Brushing neat cement slurry 02 coats withhigh performance cementiteous polymer water proofing coating of Dr. Fixit bathseal or equivalent approved WPC for thickness of 01 mm in combination of WPC and cement ( 1:1.5) by volume and upto height15 cm from bottom slab and allow it dry completely. (f)Providing PCC 1:4:8 type D-2 using 40mm gradedstone aggregate mixed with WPC of Dr Fixit as per manufacturer instructionin sunken slab overbrickbat. (g) Filling the sanitary gaps with Dr. Fixit (Pidilite) or equivalent sealing compound complete. NOTE : Area of sunken floor not exc 6.00 sqm each, |
| 51 | Item No 50 : Dismantling of floor hearth or wall tiling or stone slab including cement mortar bedding (but not backing) coat and removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed. |
| 52 | Item No 51 : M & L for Non skid Coloured ceramic floor tiles, shade as approved size (400 x 400mm) x 7-8mm thick over and including 15mm thick screed bed in CM 1:4 and pointed in white or colour cement to match complete all as specified and directed |
| 53 | Item No 52 : M & Lfor Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 54 | Item No 53 : M & Lfor Dark shade vitrified tiles of size 600x600x8-10mmthick as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and directed. |
| 55 | Item No 54 : M & L for Dark shade vitrified tiles of size 600x600x8-10mmthick in vertical surfaces such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured to match with and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed |
| 56 | Item No 55 : Dismantling stone slab and tiles of any description and thickness in floors , aprons etc laid bedding andpointed in any mortar complete all as specified directed. |
| 57 | Item No 56 : M & L for Machine cut kota stone slab flooring 18-20 mm thickover and including screed bed or bedding layer 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 58 | Item No 57 : M & L for Machine cut kota stone slab 15-18 mm thick in treads and riser of steps, skirting, dado and pillar etc over and including 10 mm thick bedding layer or backing coat in CM 1:3 laid and jointed with grey cement slurryand pointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 59 | Item No 58 : M & L for 18-20mm thick granite stone slab over and including 20 mm thick screed bed in CM 1:6 including cutting, polishing & rubbing and including rounding of exposed edges, fixed as in platforms/window cills etc complete all as specified and directed. |
| 60 | Item No 59 : Drilling through holes in granite stone for inserting pipes etc not exc. 25 mm dia complete all as specified and directed |
| 61 | Item No 60 : S & F in repair heavy duty CP mild steel hanging rod 20mm dia with end brackets and fixed with screw complete all as specified and as directed |
| 62 | Item No 61 : S & F in repair Stainless steel fancy type curtain rod 25 mm dia including bracket/wall to wall and latto on each end complete all as specified and directed. |
| 63 | Item No 62 : Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 64 | Item No 63 : S & F PVC (SWR) Pipes 110 mm bore single socketed in any length with rubber ring joints , fixed on walls including clump and bolts & nuts and securing ends of stays to wall complete all as specified and directed. |
| 65 | Item No 64 : S & FPVC (SWR) Pipes 110 mm bore single socketed in any lengthin trenches or in floorscomplete all as specified and directed. |
| 66 | Item No 65 : S & FPVC (SWR) Pipes 75 mm bore single socketed in any length with rubber ring joints , fixed on walls including clump and bolts & nuts and securing ends of stays to wall complete all as specified and directed. |
| 67 | Item No 66 : S & FPVC (SWR) Pipes 75 mm bore single socketed in any lengthin trenches or in floorscomplete all as specified and directed. |
| 68 | Item No 67 : S & F PVC (SWR) bends any radius 110mm sizecomplete all as specified and directed. |
| 69 | Item No 68 : S & F PVC (SWR) bends any radius 75 mm sizecomplete all as specified and directed. |
| 70 | Item No 69 : S & F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed. |
| 71 | Item No 70 : S & F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 75 mm dia with access door complete all as specified and directed. |
| 72 | Item No 71 : S & F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 73 | Item No 72 : S & F PVC (SWR) vent cowl 75mm bore complete all as specified and directed. |
| 74 | Item No 73 : S & Fin repair 100 mm dia Nahani trap with grating including jointing to waste pipe fixed in cement concretecomplete all as specified and directed. |
| 75 | Item No 74 : S & Fin repair 75 mm dia Nahani trap with grating including jointing to waste pipe fixed in cement concretecomplete all as specified and directed. |
| 76 | Item No 75 : S & F in repairs vitreous chinawash hand basin white flat back size 550x400mm incl 02 Nos angle iron bracket 40x40x5mm bracket CP waste coupling, complete all as specified and directed. |
| 77 | Item No 76 : S&F in repair of vitreous chinawater closet (squatt pattern) sze 580 x 440 mm complete excluding flushing cistern and flush pipeincluding provision of lime concrete bedding complete all as specified and directed. |
| 78 | Item No 77 : S & F in repairVitreous china squatting pan Orissa pattern "long pan" size 580x440mm white with "P" or "S" trap, front or back inlet with murga band andany pattern excluding flushing cistern and flush pipeincluding provision of lime concrete bedding complete all as specified and directed. |
| 79 | Item No 78 : S & F in repair ofplastic water closet seat cover, closed patternwithflat bottomand coverand mild steel chromium plated oraluminised hanging device complete all as specified and directed. |
| 80 | Item No 79 : S & F in repair 10 ltrs capacityPVC valveless syphonic action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 81 | Item No 80 : S & F in repair 15mm bore PVC connection 450mm long with PTMT nuts and washer as directed. |
| 82 | Item No 81 : S & F in repairfor CP bib taps 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified. |
| 83 | Item No 82 : S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down high pressurewith long shanks and fly nuts screwed for 15mm bore pipe complete as specified. |
| 84 | Item No 83 : S & F in repairs 15mm bore, fancy type chromium plated shower rose, 125mm size chromium plated complete all as specified and directed. |
| 85 | Item No 84 : S & F in repairs brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore size complete all as specified and directed. |
| 86 | Item No 85 : S & F in repairs brass CP kitchen sink mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore size complete all as specified and directed. |
| 87 | Item No 86 : S & F in repairs CP brass center hole mixer for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed |
| 88 | Item No 87 : S & F in repairs Two way cock/Two way Angle cock with wall flangematt chrome finish complete all as specified and directed. |
| 89 | Item No 88 : S & F in repairs hand shower (Health facut) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed. |
| 90 | Item No 89 : S & F in repair Toilet paper holder, C P box type complete all as specified and directed. |
| 91 | Item No 90 : S & F in repair Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe all as specified |
| 92 | Item No 91 : S & F in repairs C P Towel ringfixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 93 | Item No 92 : S & F in repairs Tubular Towel Rail 20mm dia. "D" type, 600mm long of CP fixed with and including brass Chromimum plated brass screws and wooden/plastic cleats. |
| 94 | Item No 93 : S & F PVC bath cabinet with looking mirror overall size350X450mm all as specified and directed. |
| 95 | Item No 94 : S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed. |
| 96 | Item No 95 : S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed by Engineer-in-charge. |
| 97 | Item No 96 : S & F in repair Soap dish CP any size complete all as specified and directed.. |
| 98 | Item No 97 : S & F in repair 450mm long Stainless steel six peg hanger chromium plated as approved by Engr-in -chargecomplete all as specified and directed. |
| 99 | Item No 98 : S & F in repair sink with drainage board size 1145x510 mm,bowl size 560x410x200 mm made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc including bedding including cementmortar,dwarf wall or cantilever brackets and connection union to pipe all as specified and directed |
| 100 | Item No 99 : S & F in repairstainless steel kitchen plate rack made out of1.00 mm thick stainless steel of size 900 x750x250mm includingscrews and weight not less than 5.00 Kg complete all as specified and directed. |
| 101 | Item No 100 : S & F in repair PVC Grating doom 125 mm dia with waste holeof PTMT (minimum weight 40gms) complete all as specified and directed. |
| 102 | Item No 101 : S & F in repair PVC Grating doom 100 mm dia with waste hole of PTMT (minimum weight 25gms) complete all as specified and directed. |
| 103 | Item No 102 : S and F in repair Hard/Rigid PVC waste Pipe with socket, 32 mm bore for WHB complete all as specified and directed. |
| 104 | Item No 103 : Supply and fixing in repair Hard/Rigid PVC waste Pipe with socket, 40 mm bore for SINK complete all as specified and directed |
| 105 | Item No 104 : M & L for joint free non skid ceramic colouredtiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and directed. |
| 106 | Item No 105 : M & L for joint free non skid ceramic colouredtiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces such as dado/skirting with and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed |
| 107 | Item No 106 : S & F in repair for 15 mm bore CP pillar taps fancy type screwed down high pressure with longshanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all as specified and directed |
| 108 | Item No 107 : Dismantling water tanks of capacity exc 500 & n exc 1000 ltr complete all as specified and directed. |
| 109 | Item No 108 : S & F for rotational moulded double layered polyethylene water storage tank cylindrical, hoisted & fixed in position all as specified capacity 1000 ltrs complete all as specified and directed. |
| 110 | Item No 109 : S & F in repair 20mm dia ball brass valve high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 111 | Item No 110 : Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified. for complete all as specified and as directed |
| 112 | Item No 111 : M & L for PCC 1:2:4, type B0 (12.5mm graded aggregate) as in padding or levelling coarse for filling undulations or depression on roof and for platform for mounting service tankscomplete all as specified directed |
| 113 | Item No 112 :M & L for providing cement concrete type B-1,1:2:4, (20 mm graded stone aggregate)including necessary formwork as in copings all as specified and directed. |
| 114 | Item No 113 : M & L for provn of roof treatment with polymeric water proofing membrane after taking down existing treatment and removal of waste materils complete all as given below :- (a) Taking down entire existing water proofing treatment on roof and cleaning the roof slab top all as specified and directed. (b)M & L for plastering 10mm in CM 1:3 using 100% course sand on roof including WPC @ 3% by weight of cement. (c) Applying a coat of bitumenous primer confirming to IS-3384-1986 @ 0.40 ltrs/Sqm on prepared surfaces and allow to dry. (d) Supply and laying of3mm thick (Minimum) polymeric water proofing membrane weighing not less than 3 Kgs/Sqm. (e) Applying and laying polymeric water proofing membrane of weight not less than 3kg/sqm. (f) Applying a coat of bitumenous 85/25 @ 1.20 Kg/Sqm over memnbrane. (g)M & L for two coats of aliuminium paint over bituminous surface all as specified and directed. |
| 115 | Item No 114 : M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 116 | Item No 115 : M & L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 mixed with water proofing compound as per manufacturer"s instructions all as specified and directed. |
| 117 | Item No 116 : M & L for preperation of surface of wall/chajja and applying a coat of acrylic polymer modified cementitious slurry consisting of one part of acrylic polymer and two parts of cement by weight complete all as specified and directed. |
| 118 | Item No 117 : Taking down cement plaster from brick wall including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 119 | Item No 118 : M & L for Raised pointing to random or polygonal rubble, un-coursed or brought uptocourses in CM 1:3 and wall hight up to 12 mtr including necessary formwork and including taking own loose/ damage pointing complete all as specified and directed. |
| 120 | Item No 119 : M & L for 10 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished even and smooth including complete all as specified and directed. |
| 121 | Item No 120 : M & Lfor preparation of new surface of walls and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification. Two or more coats over and including a coat of 1mm thick birla wall care putty / POP complete all as specified and directed |
| 122 | Item No 121 : M & L for 10 mm thick rendering in CM (1:4) on fair faces of brick wall or concrete surfaces ceiling finished even and fair complete all as specified and directed. |
| 123 | Item No 122 : M & L for preparation of new plastered ceiling surface and applying threecoats ofwhite wash completeall as specified and directed |
| 124 | Item No 123 : M & L for 15mm thick renderingin CM (1:4) on brick work including using integral water proofing compound finished even and faircomplete all as specified and directed. NOTE- WPC shall be measured & paid separetly under respective item. |
| 125 | Item No 124 : Supply only integral water proofing coumpound conforming to IS 2645 complete all as specified and directed. |
| 126 | Item No 125 : M & Lfor applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall complete all as specified and directed. Note : Purchase Voucher of Full Quantity of emulsion paint shall be submitted seperately. |
| 127 | Item No 126 : M & L for water proofing cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old painted surface of wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer"s instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface. |
| 128 | Item No 127 : M & L for one coat of acrylic water based exterior grade primer @ 0.9 lit (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and Allow 6-8 hours to dry the surface for painting of subsequent coats.complete all as specified and directed |
| 129 | Item No 128 : M & L for water based premium acrylic smooth exterior emulsion of approved colour witgh silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algal properties in two coats @ 1.79 lit (undiluted) / 10 Sqm diluted with water as per manufacturer"s instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 lit per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.Note: Guarantee Certificate shall be obtained from the manufacturer and enclosed seperately. |
| 130 | Item No 129 : M & L for complete removing old surface on wall and applying three coats of white wash complete all as specified and directed. |
| 131 | Item No 130 : M & L for applying three coats of white wash on ceilingincluding complete removing old treated surfacecomplete all as specified and directed. |
| 132 | Item No 131 : M & L for complete removing existing treatment on wall ( any number of layers ) including filling depressionof scrapped surfaces with putty and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification. Two or more coats over and including a coat of 1mm thick birla wall care putty / POP on new plaster work complete all as specified and directed Note: Purchase Voucher of Full Qty of Distemper Shall be submitted separately. |
| 133 | Item No 132 : M & L for preparation of old steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed |
| 134 | Item No 133 : Demolition of cement concrete (un-reinforced) in any position n.exc 15cm thickness ( below or above ground level ) not otherwise specially providedcomplete all as specified. |
| 135 | Item No 134 : M & L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as specified directed Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3). |
| 136 | Item No 135 : M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified directed. |
| 137 | Item No 136 : M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floorsincluding screed bed or bedding layer 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed. |
| 138 | Item No 137 : M & L for obliterating and painting building plaque with background using black synthetic enamel paint and building number with white synthetic enamel paint, overall area of plaque exc 0.1 sqm but n.exc 0.4 sqm each complete all as specified and directed. |
| 139 | Item No 138 : S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with steel wire staples, complete all as specified and directed. |
| 140 | Item No 139 : S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed stainless steel wire staple, complete all as specified and directed. |
| 141 | Item No 140 : S&F 4.00 mm thick plain sheet glasswith wooden beads, PVC beading, aluminium beads, in square n.exc 0.5 Sqm in each pane, complete all as specified. |
| 142 | Item No 141 : S&F4.00 mmthick figured glass, pin head type andglazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified |
| 143 | Item No 142 : Taking down carefully copper / aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, holders, regulators, sockets, tube light fittings i.e removingmaterials to store for keeping in safe custody or for taking credit and incl making good distrubed surfaces to match with existing surface walls, floors etc. complete all as specified and directed. |
| 144 | Item No 143 : Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs /MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed at site. |
| 145 | Item No 144 : Taking down carefully copper/aluminium Sub main wiring of any size from surface /concealed /existing conduit of any height and removing materials at size and making good disturbed surfaces of walls,floors roofs etc complete all as specified and directed. |
| 146 | Item No 145 : Taking down ceiling fan/exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Gopalpur on Sea complete all as specified and directed. |
| 147 | Item No 146 : Taking down existing single phase electric energy meter of capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/M copalpur on sea complete all as specified and directed. |
| 148 | Item No 147 :M&L for point wiring with circuit wiring from DB to control switch board complete with 1.5 sqmm, PVC insulated, FRLSH type, ISI marked, conforming to IS-694/1990 (as amended) unsheathed, multistranded, single core, copper conductor cable 1100 volts grade using approved colour coding drawn through and including PVC concealed conduiut 20/25 mm dia medium grade (MMS) and including all accessories such as bend, tee. elbows, reducers, bell mouth tube ends, short pieces & junction boxes with PVC covers etc. in walls/ roofs / floors/ ceiling etc and including cutting, chasing work at any height with flush mounting GI sunken boxes having top, bottom, side/ back side knockout for conduit entryfrom any direction made out of 1.60mm thick, 60mm deep for housing modular switches, sockets, fan regulators, indicators, blank plate etc and including providing modular white cover plate with inner frame suitable as per switch modules and including PVC insulated multistranded copper conductor 1.5 sqmm FRLSH type unsheathed (Green colour), single core cable as earth wire conneting to common earth dolly for further connection to ceiling rose and earth terminal and including making good thedirstrbed surfaces to match with existing surface and colour terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed for the following:- |
| 149 | (a) One light point controlled by one5 Amps switch, one way |
| 150 | (b) One fan /exhaust point controlled by one, one way switch 5 Amps and one regulator for fan. |
| 151 | (c) One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board. |
| 152 | (d) One 5 pin 10 Amps socket point controlled by one 05 Amps switch on same board. |
| 153 | (e) One bell / buzzer point controlled by one bell push. |
| 154 | (f) One light point controlled by two 2 way switches. |
| 155 | Item No. 148 :- All as per item No 147(c) & (d) above but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for the following:- |
| 156 | (a) One 6 pin 16 / 20 amps socket outlet point controlled by one 16 / 20 amps switch one same independent board. |
| 157 | (b) One 6 pin 16 / 20 amps socket outlet point controlled by one 16 / 20 amps switch on same board. |
| 158 | Item No. 149 :- All as per item No 147(c) above but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed. |
| 159 | Item No. 150 :- S&F Modular type switch 10 Amps, single pole, 1 way, 1 module, 240V, AC, with small indicator ISI Marked complete all as specified and directed. |
| 160 | Item No. 151 :- S&F Modular type switch 10 Amps, 2 way, single pole,1 module, 240V, AC, with small indicator ISI Marked complete all as specified and directed. |
| 161 | Item No. 152 :- S&F Modular type bell push 10 Amps, 1 module, single pole, 240V, AC, with embosing bell simble & indicator ISI Marked complete all as specified and directed. |
| 162 | Item No. 153 :- S&F for Modular type switch 16/20 Amps,single pole, one way, 1 module, 240 V, with small indicator, AC, ISI marked complete all as specified and directed. |
| 163 | Item No. 154 :- S&F for Modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module, 240 V, AC, ISI marked complete all as specified and directed. |
| 164 | Item No. 155 :- S&F for Modular type Socket 16/20 Amps 6 pin combined shuttered socket 2 module, 240V, AC ISI Marked complete all as specified and directed. |
| 165 | Item No. 156 :- S&F red color lighting indication lamp switch, single pole, 240 volts, AC, 50 Hz suitable for 1 module ISI marked complete all as specified and directed. |
| 166 | Item No. 157 :- S&F modular type step fan speed regulator 120 W, 2 mdule, 230volts, AC, 360 degree rotation 0/1 to 5 steps, ISI marked complete all as specified and directed. |
| 167 | Item No. 158 :- S&F call bell ding dong AC, 230 Volts single pole, multi music type ISI marked complete all as specified and directed. |
| 168 | Item No. 159 :- S&F angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate and superior quality for batten fittings. bulbs complete all as specified and directed. |
| 169 | Item No. 160 :- S&F TV sockets one module with top cover plate and inner frame including all necessary accessories and including removing of old unserviceable item complete all as specified and directed. |
| 170 | Item No. 161 :- S&F for Ceiling rose, 3 terminal, PVC/polycarbonate body ISI marked, and superior qualitycomplete all as specified and directed. |
| 171 | Item No. 162 :- M&L for Sub main wiring complete with 2 run of 6 sqmmsingle core copper conductor (ISI marked) cable 1100 volts grade ISI marked FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed, flexible, multi stranded colour coded cables drawn through and including rigid PVCconduit ISI marked medium grade (MMS) with all connected accessories such as bend, Tee, Elbow, Short peices etc concealed in wall / roofs floors and including one run of 6 sqmm single core copper conductor cable lexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and as directed. Note:- Two runs 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. |
| 172 | Item No. 163 :- S&F and sheet metal enclosure, with acrylic door type, double door, 240 volts AC SPN DB, 8 way, flush mounting with 100 amps copper busbar, neutral bar, earth bar links and MCB incomer MCB SPN/DP and CB SP as outgoing for IP 43 & IP 54 DBs protection and making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and directed. |
| 173 | Item No. 164 :- S&F MCB SP 6 to 32 Amps 10 KA, "C" sseries, AC 240Volts, 50Hz, ISI marked and including removing old unsv items complete all as specified and directed. |
| 174 | Item No. 165 :- S&F MCB SPN 40 to 63 Amps 10 KA, "C" series, AC, 240 Volts, 50 Hz, ISI marked and including removing old unsv items complete all s specified and directed. Make: Legrand / ABB/ Havells. |
| 175 | Item No. 166 :- Taking down old unserviceable geysers of any capacity from work site at any height and deposit to MES store yard for safe custody and supply and fix new electric water heater, storage type steel body/plastic body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, Hot water heavy duty connection pipes-02 Nos, holefasterns-04 Nos and necessary accessories as per site requirement etc.complete all as specified and directed. |
| 176 | Item No. 167 :- S&F 230 V, 1200 mm sweep brushless direct current smart and decorative type ceiling fan complete with three blades, down rods, smart electronic regulator, smart remote control operating unit LED down lights, metalic finish, dust resistant and connected accessories, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current copper winding motor, colour as per requirement at site incl writing MES No on ceiling fan with synthetic enamel paintcomplete all as specified and directed. |
| 177 | Item No. 168 :- S & F for Energy efficient exhaust fan of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 Cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES number with synthetic enamel paint complete all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted). |
| 178 | Item No. 169 :- S & F for Energy efficient exhaust fan of 250 mm sweep made of sturd engineering plastic Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 Cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES number with synthetic enamel paint complete all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted). |
| 179 | Item No. 170 :- S&F for Highly efficient LED Bulbs, 10 W, 240Volts suitable for holders ISI marked, and superior quality complete all as specified and directed. |
| 180 | Item No. 171 :- S&F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and including provision of LED bulb 10 watts type, B22, 220 Volts AC with high efficiency, soft glare free light complete with LED lamp, holder suitable for wall surface and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and as directed. Make: Havells Cat No. LHDLO6160099 or equivalent make in Crompton/Philips/Bajaj. |
| 181 | Item No. 172 :- S&F for LED 10 watts batten aluminium extruded with docorative end caps complete all as specified and as directed.Make: Bajaj Cat No. BCLSB 10 NW or equivalent make in wipro/Philips. |
| 182 | Item No. 173 :- S & F for Energy saving new generation 10 Watts LED bulk head fitting IP-65 luminaire with opel diffuser pre wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all asspecified and directed. Make :-Havells Cat No. LHFHDPE1TN1K020 or equivalent make in Crompton/Philips. |
| 183 | Item No. 174 :- S & F 20 watts LED light fitting pride essential bright linear white lighting, high quality materials and slim intergrated design, extruded aluminium housing, housing enhances safety, PC diffuser reliable and robust housing structure, maximize the endurance over the life time, easy to install, efficency 100 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block - 02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and as directed. Make: Havells ordering code. LHEXAWP7IN1W020 or equivalent Make in Crompton/Philips. |
| 184 | Item No. 175 :- Supply and fixed bldg secruity light fitting of capacity 35 watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. Make: Havells/ Crompton/ Philips as approved. |
| 185 | Item No. 176 :- S & F for PVC non-metallic rigid conduit incl boxes, junctions boxes 1 to 4 way & terminals but incl of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers lock nuts, saddles, pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for LAN, telephone and TV connections cables including cutting. chasses and making good distrubed surface to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed. |
| 186 | Item No. 177 :- Supply, installation, commisioning and testing indoor type LT wall mounted Panel of minium size 1.20m(height) x 1.20 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, duster & vermin proof indoor double door, front openable, including four compartment for fixing of five Nos single phase meter and MCB and providing glass view for reading of meter and providing rubber / PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tapes / sleeves with maintained the colour code and copper strip / wire busbar of suitable size to MCCB input and MCCB / MCB output of suitable length for connection of cable from main busbar, made out of 2.0mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of powder coated paint over a coat red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5 sqmm copper wire and connections of all outgoing/incomming existing cable of any size complete all as specified and directed by Engineer - in - charge. |
| 187 | INCOMING: (a) Copper strip busbar of size 25 x 5 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends - 04 Nos |
| 188 | (b) MCCB, 4 pole, 415 volts, Lcu-25 KA breaking capacity, IP-44 and IP 66/67 protection, 100 Amps rating adjustable thermal magnetic release including all fixing accessories with both ends spreaders links-01 No. (c) Digital voltmeter of range (0-500) volts, flush mounting type of size 100 mm x 100 mm (4"x4") square dial with selector switch-01 Nos (Make:-Legrand/Schneider/L&T) (d) LED Neon indicator lamp (RYB) with holder, 230/240Volts, AC-01 set (set of three) Make: AE/L&T. |
| 189 | OUTGOING: (a) MCB, single pole & neutral, 40 Amps, 240 Volts "C" curve, 10 KA all complete all as specified and as directed -06 Nos (b) Single phase, smart meter, AC, two wire, Tamper proof, static meter of class 1.0, 240Volts, 50 Hz, Radio frequency 10 Amps-60Amps, confirming to IS-16444 and relevant IEC standards with inbuilt 865-867 MHz radio frequency communication facility with self healing mesh network with default and on demand display, billing data generation facility, anti-tamper features, microprocessors and LED/LCD based circuit. Meter should support the following data 30 min instantaneous data for voltage, current, power factor, power cumulative energy and frequency, 30 load survey data for energy, monthly biling survey for cumulative energy and Max Demand. Meter should have connect/ disconnect functionality operable compactable system from prepaid billing software in future. The meter should support open communication protocal DLMS with the software 04 Nos. Make: Secure, L&T, Scheneider. |
| 190 | Item No. 178 :- M & L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode upto test point or up to 7.5 mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade GI funnel with wire mesh including charcoal, salt packed all around the earthelectrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45 x 45 cm, RCC/(PVC heavy duty cover 1:2:4 type B1 of size 45 x 45 x 6 cm excavation/earthwork in any strata and returning filling, removal of surplus soil and testing point for required value including removing old item complete all as specified and directed. |
| 191 | Item No. 179 :- Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation of laying cable including getting out in soft/loose soil complete all as specified and directed |
| 192 | Item No. 180 :- Returning, filing in, including spreading,watering and well rammingin layers not exceeding 25 cm insoil etc complete all as specified and directed |
| 193 | Item No. 181 :- Removing purplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed |
| 194 | Item No. 182 :- Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified and directed. |
| 195 | Item No. 183 :- M &L for brick sub class "B" 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed. |
| 196 | Item No. 184 :- M &L for PVC insulated, LT armoured electric cable with aluminium standed conductor 1100 volts grade, cross - sectional area 25 sqmm, 4 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands, nuts, bolts and washers, saddeling on wall properly etc and testing and including removing old unsv UG cable complete all as specified and directed. Make: havells/Finolex/Polycab/Universal |
| 197 | SCHEDULE "A"(Schedule of credit) Schedule of Credit Rs 650390.00 (Minus) inserted by the MES (Note : Credit amount shall be deducted manually to arrive net bid amount) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
