Military Engineer Services-MES has published Tender For Additions/Alterations And Certain Improvement Works To Building No. B-1 (Type-Ii) At Coast Guard Enclave Visakhapatnam Under Age(I)(Cg) Vizag. Submission Date for this Tender is 05-02-2024. Civil Work Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth and wall tiling/granite stone/kota stone including cement mortar bedding (but not backing) removal serviceable tiles to store and rubbish of the premises. |
| 2 | M&L non skid ceramic colouredtiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match includingscreed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed.Note: The colour / shade / design of tiles shall be as approved by AGE (I). |
| 3 | M & L for Vitrified Tiles, Double Charged, Coloured, Premium Quality, of size exceeding 0.36 Sq.m and not exceeding 0.42 Sq.m, 10 mm thick as in Floors, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed.Note: The colour / shade / design of tiles shall be as approved by AGE (I). |
| 4 | S&F glazed ceramic colour tiles 450x300x7 to 8mm thick over backing coat of 10mm thick in Cement Mortar 1:3 on vertical surface such as walls, skirting, dado, set and joint in neat cement slurry and pointed in white / coloured cement to match with existing surface make as a specified. |
| 5 | M&L 25 mm thick PCC 1:2:4, type B1 (using 20 mm graded aggregate) as in sub base of floor,finished even and smooth without using extra cement. |
| 6 | M&L 18 to 20 mm thick granite (of any type and colour) tiles machine cut in floors/skirting/dado/cladding jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing.Note: The colour / shade / design of tiles shall be as approved by AGE (I). |
| 7 | Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations |
| 8 | M&L 20 mm thick screed bed or bedding layer of mortar for granite stone in CM 1:4. |
| 9 | Taking down cement plaster on brick or concrete surface in any description etc including racking out joints, hacking for key, scrubbing down with water and removal of rubbish from the premises all as specified and directed |
| 10 | M&L rendering 15mm thick on other than fair faces of brickwork in CM (1:6) finished even and smooth without using extra cement all as specified and directed. |
| 11 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement including mixing of water proofing compound all as specified and directed. (Note : - Rate of water proofing compound shall be paid under respective item) |
| 12 | M&L rendering 5 mm thick on concrete ceiling surfaces in CM (1:3) all as specified and directed. |
| 13 | Supply only water proofing liquid all as specified and directed.. |
| 14 | M&L for preparation of old painted surfaces of wall and soffit of chajja, roof slab etc.by using high pressure jet washer or with mechanical wall sander( having vaccum mechanism for suction) having minimum 1500RPM,sanding pad of 80 grit size having 7"" to 9""(as required), including cleaning the surface by scrapping for removing loose paint, corrosion, including cleaning, watering etc. to make the surface free from dust, filling the cracks upto 5mm with crackfill paste(an elostomeric paste), appling2mm wall care putty in two layers over one coat of suitable exterior weather proof primer with gargo machineand after that appling two coats of weather proof emusion paint by using airless spray technology capable of operating single spray gun with hose of adequate length over another one coat of suitable exterior weather proof primer with gargo machine, including necessary scaffolding, safety and protective measures upto height of building complete all as specified and directed. Make:Asian paints(Apex suprema) or equivalent in other makesspecified in the tender complete all as specified and as directed by Engineer-in charge. |
| 15 | M&L for cleaning New plastered surfaces of wall and soffit of chajja, roof slab using emery paper, putty blade/scraper as applicable for removing loose paint, corosion, algae formation etc , filling the cracks upto 5mm with crackfill paste(an elostomeric paste), appling2mm wall care putty in two layers over one coat of suitable exterior weather proof primer with gargo machineand after that appling two coats of weather proof emusion paint by using airless spray technology capable of operating single spray gun with hose of adequate length over another one coat of suitable exterior weather proof primer with gargo machine, including necessary scaffolding, safety and protective measures upto height of building complete all as specified and directed. Make:Asian paints(Apex suprema) or equivalent in other makesspecified in the tender complete all as specified and as directed by Engineer-in charge. |
| 16 | M& L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification Make : Apex from Asian Paints / All Guard from Berger /Weather Shield Max Exterior Acrylic from ICI Dulux |
| 17 | M&L for preparing new plastered surfaces of walls and applying two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour overa coat of primer complete, as per manufacturer"s specification Make : Apex from Asian Paints / All Guard from Berger /Weather Shield Max Exterior Acrylic from ICI Dulux |
| 18 | M&L for complete removal of existing treatment on old plastered walls/ceiling and M&L for preparing old or new surfaces on walls/ceiling by brooming down or by steel wire brushingand applying three coats of white wash all as specified and directed. |
| 19 | M&L for preparation of new plastered surfaces and applying three coats of white wash on walls/ceilings |
| 20 | M&L for applyingwall care putty not exceeding 2mm thick in two layers on walls/ ceilings to obtain a smooth surface including surface preparation and making good andwith out any undulations on thesurfaces complete all as specified and directed.(Note :Rate shall be included for necessary scaffolding and safety measures where required at siteup to 4th storey). |
| 21 | M&L for writing letters or figures (Block, Roman, italic or Indian) by painting with one coat of black synthetic enamel paint inn exc 30 cm dia on plastered surfaces on walls and numbered with one coat of synthetic enamel paint height n. exc 15 cm and width 2 cmwork up to 4th storey complete all as sepcified and directed by Engr-in-Charge. |
| 22 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and not exc 4.00 Sqm each. |
| 23 | Taking down chowkhat or frames with shuttersarea n exc 1.5 Sqm each |
| 24 | Taking down PVC chowkhat or frames with shutters (without taking off shutters from the frame) of any description |
| 25 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing. |
| 26 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 27 | S&F 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed. |
| 28 | S&F 35 mmFlush shutters , solid core construction with Particle board core and ply wood face panels commericial on both sides fitted to chowkats. |
| 29 | S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, cham-fered or roun-ded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. as specified in SSR Part I, Section 8, clause 8.20 (a). |
| 30 | S&F 200 mm aluminium anodised barrel tower bolts of extruded section. |
| 31 | S&F 150 mm aluminium anodised barrel tower bolts of extruded section. |
| 32 | S&F 300 mm aluminium, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy. |
| 33 | S&F 200 mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy. |
| 34 | S&F 100 mm long butt hinges, medium weight, cold rolled mild steel. |
| 35 | S&F Extruded aluminium alloy handle, cast type 150 mm size. |
| 36 | M&L MS work in hold fast and similar small article confirming to Fe 410-0 Fe 310-0. |
| 37 | M&L PCC 1:2:4, type B-0 (using 12.5 mm graded crushed aggregate) for fixing hold fasts, angle etc. |
| 38 | Preparing surfaces of treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each of any description and treated with tar or coal tar black paint. |
| 39 | S&F Alluminium alloy wire cloth, o.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with old/new wooden beadings all as specified and directed. |
| 40 | S&F mild steel 300 mm ordinary rat rail rod pattern spring (Helical door spring) including roller and roller plate complete. |
| 41 | S & Ffloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of length 150 mm. |
| 42 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe-290 Gde-E-165 including dismantling of wroughtiron / mild steel of any description |
| 43 | Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 44 | M&L for PVC ventilators with frame work made of multi chamber hollow PVC section DWUF 405 (40X46mm). The glass (3mm thick pin headed) is fixed to the frame in the lower section using extruded PVC section having a dimension of9mm X 14.5mm (GL-19 SINTEX PVC section) with EPDM gasket (SPL-003) for both the PVC sections. SINTEX make ventilator"s centre mullion made up of multi chamber hollow PVC section DWUF-406 (63.5mmX40mm) with EPDM gasket is used. GL-19 is fixed to the 3 sides of DWUF-405 and to one side of DWUF 406 (63.5X40mm) above the centre mullion. Glass panels with aluminium lower set is fixed to the frame DWUF-405 on the top of the ventilator for the glass. DWUF 405 and DWUF 406 corners shall be metre cut and welded, jointed with 12 mm MS rods (guard bars). |
| 45 | S & F4.8 mm thick sheet glass ordinary quantity and glazing with oil putty in squares not exceeding 0.50 sqm in each pane. |
| 46 | S & F4.8 mm thick sheet glass ordinary quantity and glazing with oil putty in squares exceeding 0.50 sqm in each pane. |
| 47 | S&F in repair bevelled edge mirror of size 600 mm x 450 mm, selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 48 | S&F in repair vitreous China wash hand basin with pedestal, white,flat back, size 630 x 450 mm including brackets/rock bolt , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe. |
| 49 | S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete. |
| 50 | S&F in repairs15 mm bore bib tap (long body) cast copper alloy chromium plated, screwed down high pressure,with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 51 | S&F in repair tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges. |
| 52 | S&F in repair health faucet with CP flexible cordfixed on wall alongwith two way brass CP Bib cocktype withhandle, screwed down, screwed for iron pipe or famale of quarter turn type. |
| 53 | S&F Vitreous china EWC, white (excluding fixing bolts, flushing cistern and flush pipe) including dismantling of old existing WC of any type. |
| 54 | S&F plastic seat cover white for EWC, closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device. |
| 55 | S&F in repair PVC valveless, syphonic action type, flushing cistern of 10 liters capacity, low level, white, with inlet, ball valve, float and handle including brackets. |
| 56 | S&F in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement. |
| 57 | S&F in repair 110 mm dia PVC (SWR) gully trap, plain with grating including jointing with solvent cement. |
| 58 | S&F in repair 40 mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed. |
| 59 | S&F in repair 32 mm dia flexible PVC waste pipe for basin/ sink etc. |
| 60 | S&F PVC connection pipe 450 mm long with nut and bolt at both ends for hot and cold water complete as fixed in repair. |
| 61 | S&F in repair brass chromium plated shower rose 125mm size with or without swivels joint for fixing with steel pipe or union. |
| 62 | S&F in repairs Soap dish, vitreous China white, approximate size 160 x 160 x 90 mm fixed to plugs with chromium plated brass screws. |
| 63 | S&F in repair curtain rails, anodised aluminium alloy with fixing brackets, stops, rollers etc. |
| 64 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 65 | S & Fin repair 15 mm dia superior quality CP angular stop cock with wall flange fixed as in repair all as specified. |
| 66 | S&F in repairs18/19 mm thick prelaminated particle board, interior grade, as in cup board shutter double leaf prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. |
| 67 | S&F 12mm Plywood, grade BWR,type BB, as cupboard shelf or pelmet boxes fixed with screws to timber frame workincluding taking down old one complete all as specified and directed. |
| 68 | S&F 75 mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed. |
| 69 | S&F100 mm hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws. |
| 70 | S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised. |
| 71 | Demolition of reinforced cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and in any position not otherwise described (reinforcement cut as required to facilitate demolition). |
| 72 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia or securing with clips. |
| 73 | All as per item No.72 here-in-before but 6 to 8 mm dia of bars. |
| 74 | M&L RCC type B-1, 1:2:4 (20 mm graded stone aggregate) (nominal mix) as in chajjas, slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl necessary form work . |
| 75 | Use and waste of formwork to chajjas, edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work. |
| 76 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store all. |
| 77 | S&F 3/4"" or 20 mm CPVC pipes SDR 11 & plain SDR 11 including all necessary fittings onwalls(conceled) & ceiling or laid in floors for internal water supply as specified and directed by Engr-in-charge |
| 78 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store all. |
| 79 | S&F 1"" or 25mm CPVCpipes SDR 11 & plain SDR 11 including all necessary fittings on walls & ceiling or laid in floors at height up to 4th storey as specified and directed by Engr-in-charge |
| 80 | Taking down eaves gutters or rainwaterCI pipes (any size or pattern) including all fittings heads, shoes, bends, sawn-necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories). |
| 81 | S&F PVC (SWR) 110 mm pipes double socketed, in any length with rubber ring joints, on walls. |
| 82 | S&F PVC (SWR) 75 mm pipes double socketed, in any length with rubber ring joints, on walls. |
| 83 | S&F PVC (SWR) "P’ trap 110 mm with lip ring. |
| 84 | S&F110 mm bore PVC (SWR) junction bends/ single, (Single T) or any type of bends etc..equal or unequal with access door asrequired at site. |
| 85 | S&F75 mm bore PVC (SWR) junction bends/ single, (Single T) or any type of bends etc equal or unequal with access door as per site requirement |
| 86 | M&L for preparing new steel surface of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamelled paint over a coat of red oxide primer. |
| 87 | M&L forpreparing new surface of wood or wood based material of any description and in any position not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 88 | M&L forpreparing old steel surface of any description, over 10 cm in width or girth, not otherwise described and painting with one coats of synthetic enamelled paint. |
| 89 | M&L forpreparing old surface of wood or wood based material of any description and in any position not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint. |
| 90 | M&L for providing and injecting chemical emulsion for post construction anti-termite treatment at points of contact of wood work / along skirting by chemical emulsion (in oil or kerosene bnased solution )@ 0.5ltre/hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same. |
| 91 | M&L for providing and injecting emulsion for post construction anti-termite treatment of soil undr existing floors using emulsion @one litre per hole 300mm apart inclduing drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cment : 2 coarse sand) to match the existing floors. |
| 92 | Dismantling of water tanks PVC/RCC of capacity n exc 1000 Ltrs and removal to store |
| 93 | S&F Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs. |
| 94 | S&F25mm dia Float valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 210 gms) |
| 95 | Demolition of concrete and hardcore of any description below or above groundand in any position not otherwise specifically provided including removing the debries to outside of MD land, where directed.for complete all as directed. |
| 96 | M&L hardcore of gauge not exc 63 mm of broken stone, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface. |
| 97 | M&L 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded aggregate) as in flooring/ plinth protection, finished even and smooth using extra cement. |
| 98 | M&L 25 mm thick PCC 1:2:4, type B1 (using 20 mm graded aggregate) as in sub base of floor/plinth protection, finished even and smooth without using extra cement. |
| 99 | S&F glass dividing strips, 3mm thick 38mm width inserted in position confirm to design. |
| 100 | Dismantling of stone slab and tiles of any type , any description or thickness laid bedded and pointed in any mortar as in floors,aprons etc, |
| 101 | M&L 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub-base |
| 102 | M&L for 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor tiles. |
| 103 | M&L chequered designed cement concrete tiles of size 300mmx300 mmx20mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors. |
| 104 | Taking down Point wiring complete including switch socket ceiling rose, Lamp holdersetc |
| 105 | Taking down light fittings/Holder any type any capacity |
| 106 | Taking down MCB DBs including MCBS |
| 107 | Taking down Submain wiring any type any rating |
| 108 | Taking down earthing plates including earthing lead |
| 109 | M & L for Modular concealed point wiring on wall and surface wiring on ceiling/roof with necessary fixing arrangements with multi stranded PVC-FRLS insulated and unsheathed copper multi stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness as per manufacturer design with earth dolly and Grid, Crown and cover Plate for fixing of modular switches / sockets, fan regulators with captive screw including PVC-FRLS insulated and unsheathed copper multi stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of paris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge One light point controlled by one switch |
| 110 | All as per item No. 109 here-in-before One fan/exhaust fan point controlled by one way switch |
| 111 | All as per item No. 109 here-in-before One 5A 2pin/3pin socket on same board. |
| 112 | All as per item No. 109 here-in-before One bell point controlled by one switch |
| 113 | All as per item No. 109 here-in-before One 3 pin socket point 5A controlled by switch on independent board |
| 114 | All as per item No. 109 here-in-before but for power point wiring with 2.5 Sqmm PVC- FRLS insulated, unsheathed, copper conductor, multi stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multi stranded 1100 volt grade cable as continuous earth lead. |
| 115 | All as per Item No 109 but One light point controlledby two 2-way switches with cables 1.5 sq. mm size. |
| 116 | M & L for Modular switch single pole one way 5 Amps, 240 volts, white finish complete all as specified. |
| 117 | M & L for Modular bell push single pole one way 5 Amps, 240 volts, white finish complete all as specified. |
| 118 | M & L for Modular switch 16 Amps, 240 Volts single pole white finish complete all as specified |
| 119 | M&L for socket outlet 5 pin, 5 amp Modular type white finish complete all as specified |
| 120 | M&L for socket outlet 5 pin, 16 amp Modular type white finish complete all as specified |
| 121 | S & F Buzzer, Ding Dong AC, 230 volts, single pole. |
| 122 | S&F ceiling rose, surface backlite, 65 x 20 mm three terminal |
| 123 | S&F double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBS of cables/wires all as directed. |
| 124 | S&F double door metallic sheet metal enclosure for DB when MCBs to be used TPN 4 ways, 415 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed. |
| 125 | S&F in replacement testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs |
| 126 | S&F in replacement testing and commissioning of MCB SPN 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs. |
| 127 | S&F in replacement testing and commissioning of MCCB FP, 415 volt 63 amp 16 KA capacity connected with suitable lugs complete all as specified and directed. |
| 128 | M&L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in and including rigid non metallic medium white ivory PVC conduit medium grade ISI marked of size not less than 20 mm dia concealed position inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, saddlers, pipe hooks etc fixed properly on as in concealed position incl cutting chasing & making good to disturbed surfaces & matching with the existing colour of wall/floor etc conduit with 6.0 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all as specified. |
| 129 | Supply & fix exhaust fans Metal type, AC single phase 230/240 V of size 300 mm sweep with louvers complete all as specified and directed Note Old Fans shall be deposited to MES Store yard of AGE(E/M) |
| 130 | S&F PVC Ventilating fans (Exhaust fan) AC single phase 230V of size 250 mm sweep with louvers & shutters. Note Old Fans shall be deposited to MES Store yard of AGE(E/M) |
| 131 | M&L for earthing complete with M.S galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of Gl or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos, both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia med, grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I, 2009 specification, |
| 132 | Supply and fix in repairs LED street light fittings 25 Watts Pressure die cast aluminum housing, heat resistant toughened glass with frame, IP-66 protection better optics for uniform distribution including connection wire from pole box to light of make Havells Cat No. ENDURAPEARLNEOSL70WLED757PASYTOPC or equivalent complete all as specified and as directed. |
| 133 | Supply & fix Decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly 1x 20 Watts complete with all accessories & Provn of flaxible three core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on wall including all necessary fixing accessories complete all as directed |
| 134 | Supply and install Water heater (Geyser) storage type of capacity 25 liters glass lined coated inner tank, suitable installation including 02 KW heating element, cable with 3 pin plug Top etc complete all as specified and as directed. Note: Old Geyser shall be deposited to MES Store yard of AGE(E/M). |
| 135 | S & F ceiling fan BLDC Motor energy efficent, high speed 380 RPM copper winding complete with all accessories of size 1200 mm sweep, BEE 5 Star rated all as specified and directed. Note: Old Fans shall be deposited to MES Store yard od AGE(E/M). |
| 136 | Supply & fix fan step regulator, electronic type watt, 230 volts, AC. |
| 137 | Supply & fix Decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly 1x10 Watts complete with all accessories & Provn of flaxible three core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on wall including all necessary fixing accessories complete all as directed Make Havells LHEXACP7IN1W010 or equivalant Philips/Crompton |
| 138 | Supply & fix Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED lamp complete with all accessories and fixing the fitting on wall including all necessary fixing accessories complete all as directed Make Havells LHDL02160099 or equivalant Philips/Crompton |
| 139 | M & L for Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, elbows, reducers, bell bends, mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc supplied and fixed external dia of 25 mm complete all as specified & directed. |
| 140 | Cast Iron/pressed steel terminal boxes 100x100mm and 60 mm deep for mounting, switches, sockets, fan regulator, etc. with 3mm thick plastic laminated sheet cover. |
| 141 | M & L for junction boxes (1 to 4 way) external dia 25 mm complete all as specified and directed |
| 142 | Supply and fix TV sockets any type complete |
| 143 | Supply and fix Tele sockets any type complete |
| 144 | Supply and fix coaxial TV cable complete |
| 145 | Supply and fix rosette junction box complete. |
| 146 | Supply and fix telephone cable copper 0.4mm, 1pair. |
| 147 | Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 3.5 Core complete with suitable size lugs, nut bolts washer etc complete including taking down old unserviceable all as specified and directed. |
| 148 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed. |
| 149 | Returning, filling including spreading, levelling, watering & well ramming in layers not execeeding 25 cm thick complete all as specified and as directed. |
| 150 | Removing excavated soil/demolished material not exceeding 50 Mtrs from the starting point complete all as specified and as directed. |
| 151 | M & L for dry river washed and screened dry sand for filling in trenches below and around the cable for cushioning including punning down as specified in relevant clause of SSR Part 1. 2010 |
| 152 | Supplying and laying Brick sub class "B" locally available best quality laid in trenches above sand cushioning for cable protection complete as specified and directed by Engineer-in-Charge. |
| 153 | Supply and laying/fixing, Gl pipe light grade 40 mm dia bore for cable protection fixed to pole/wall or laid under floor/road/pavement, including taking out old & removal, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
