|
| 1 | Decentralized Material |
| 2 | Supply of Aluminium Crimping Lugs of size 25 Sq.mm |
| 3 | Supply of Aluminium Crimping Lugs of size 70 Sq.mm |
| 4 | Supply of Aluminium Crimping Lugs of size 95 Sq.mm |
| 5 | Supply of Aluminium Crimping Lugs of size 120 Sq.mm |
| 6 | Supply of All Type MS Clamp with N&B PCC Pole 8.5 Mtr Long (MS Flate 50X6mm & 18m Dia hole for 16x65mm nut & bolt as per RESPO Specification) |
| 7 | Supply of All type of MS Clamp with N&B STP Pole Sp33/55/72 (MS Flate 50X6mm & 18m Dia hole for 16x65mm nut & bolt as per RESPO Specification) |
| 8 | Supply of LT shackle insulator with one no Nut & bolt 150x16 mm made of best quality pore line and without defeets ISI standard as per specification of UPCL |
| 9 | Supply of Stay Insulator 90X65 mm |
| 10 | Supply of all type of PP Clamp with Nut &Bolt (as per RESPO specification) |
| 11 | Supply of clamps for Dead End for Suitable for AB cable (As per Specification & Drawing of UPCL) |
| 12 | Supply of MS Nut & Bolt |
| 13 | Supply of clamps for Suspension clamps for Suitable for AB cable (As per Specification & Drawing of UPCL) |
| 14 | Supply of LT insulator Pearcing connector 120/95 mm to 120/95 mm.(For line to line)(As per Specification & Drawing of UPCL) |
| 15 | Supply of LT insulator Pearcing connector 25/15 mm to 25/15 mm.(For line to line)(As per Specification & Drawing of UPCL) |
| 16 | Supply of LT Bare Neutral Connectors PG Clamp 95sq mm to25 sq mm (For line to line)(As per Specification & Drawing of UPCL) |
| 17 | Supply of Dead End clamps with I-Hook. (As per Specification & Drawing of UPCL) |
| 18 | Supply of Suspension clamps with I-Hook. (As per Specification & Drawing of UPCL) |
| 19 | Danger Board With Clamp |
| 20 | Labour Charges |
| 21 | Cartage of ST Pole and PCC Poles from store center to constructuin site with loading, unloading at both points. (loading, unloading pluse carriage per pole) and proper stacking, cartage of other material (other than poles) by vehicle for store center to nearest construction site store including loading and unloading at both ends & cartages of the following capacity transformer from store center construction site with loading and unloading at both points. (loading, unloaidng plus carriageof T/F) (0-20 KM) |
| 22 | SP-21/23 |
| 23 | SP-33 |
| 24 | SP-55 |
| 25 | SP-72 |
| 26 | PCC Poles |
| 27 | Other material in weight |
| 28 | 25 KVA |
| 29 | 63 KVA |
| 30 | 100 KVA |
| 31 | 250 KVA T/F |
| 32 | LT PRMC |
| 33 | 11 KV PRMC |
| 34 | Head load cartage of following Poles from road to site (Rates are per pole/KM) & Head load cartage of small materail. Rates are per Km/ Quintal including loading and Unloading & Head load cartages/ maunal shifting/lifting with crane/hydra of the following transformers along with loading/unloading at both points (the rates are per transformer/Km). (0-1KM) from dum store to pit site. |
| 35 | Upto 0 to 1 km |
| 36 | SP-21/23 |
| 37 | SP-33 |
| 38 | SP-55 |
| 39 | SP-72 |
| 40 | PCC Poles |
| 41 | Other material in weight |
| 42 | 25 KVA T/F 11/0.4KV |
| 43 | 63 KVAT/F 11/0.4KV |
| 44 | 100 KVAT/F 11/0.4KV |
| 45 | 250 KVA T/F |
| 46 | LT PRMC |
| 47 | 11 KV PRMC |
| 48 | Excavation of earth for pole pit of size 0.9x0.6x1/6 of full legth of pole for erection of pole in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work. |
| 49 | Additonal digging of pole pit hard cutting RCC block etc. |
| 50 | Erection of following single support pole in prrpoer level and alignment as per RESSPO construction manual |
| 51 | SP-21 |
| 52 | PCC Poles |
| 53 | SP-23 |
| 54 | SP-33 |
| 55 | SP-55 |
| 56 | SP-72 |
| 57 | Erection of following double support pole in proper level and alignment alongwith fixing of all accessories, like top channel, X-bracing & clamps as per RESSPO construction manual. |
| 58 | PCC Poles |
| 59 | SP-23 |
| 60 | SP-33 |
| 61 | SP-55 |
| 62 | SP-72 |
| 63 | Erection of following Four pole support in proper level and alignment alongwith fixing of all accessories, like top channel, X-bracing & clamps as per RESSPO Manual. |
| 64 | SP-23 |
| 65 | SP-33 |
| 66 | SP-55 |
| 67 | SP-72 |
| 68 | Grouting of pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 (1 cement : 4 graded stone 20 mm nominal size : 8 coarse sand)block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO construction Maual. |
| 69 | Muffing of poles of size 45cm above ground level with CC ratio 1:4:8 (1 cement : 4 graded stone 10mm nominal size : 8 coarse sand ) block including cost of Cement, sand and stone ballast back filling soil and boulders in pit and ramming and proper alignment, leaving as per RESSPO construction Manual. |
| 70 | Fabrication of M.S Channel Angle iron after cutting in required sized with drilling of holes upto good finish for top channel, cracing and special type bracket etc. as per RESPO sehedule and local approved drawing. |
| 71 | Fixing of special type bracket |
| 72 | Fixing of D-type bracket in L line |
| 73 | Fixing of traingular type bracket in 11 kv line |
| 74 | Excavation of earth for stay pit of size 0.6x0.6x1.2mtr in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work. |
| 75 | Fixing of stay clamps for PCC pole. |
| 76 | Fixing , tightening and nozzaling of Stay with pole and stay rod on required tension as per drawing/RESSPO manual. |
| 77 | LT stay |
| 78 | 11 KV line |
| 79 | Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block including costof Cemaent,sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual. |
| 80 | Earthing of support with M.S. Earth rod of 2.5 meter long by hammering of M.S. Rod to proper depth and connecting G.I. wire as per construction manual & Head of the earth rod should be 30cm below the ground level. |
| 81 | Laying, Spreading, Stringing and sagging of 11 KV line in 3 phase (3 phase 4 wire) of the following wire as phase wire with G.I. earth wire complete including fixing of all accessories in 3 Nos. conductor in parallel with binding and jumpering as per profile and profile and sagging chart. |
| 82 | ACSR Weasel |
| 83 | ACSR Rabbit |
| 84 | ACSR Dog |
| 85 | Laying , Spreading, Stringing and sagging of L.T. Lines of ACSR Weasel as phase wire with G.I. earth wire complete with binding and jumpering as per RESSPO Specn. |
| 86 | 3 phase 5 wire length |
| 87 | 3 phase 4 wire length |
| 88 | 2 phase 3 wire length |
| 89 | 1 phase 2 wire length |
| 90 | Guarding of line over (Telephone/Road/L.T line crossing as per drawing with 6/8 SWG GI wire including fixing of guarding channel/angle as per RESSPO manual . LT/11KV/33KV. |
| 91 | L.T./11KV Line. |
| 92 | 33KV Line. |
| 93 | Laying and erection of L.T. PVC Cable including crimping of lugs of size 1x70,120, 150 Sq.mm. |
| 94 | Mounting & Fixing of TPMO on double pole structures including making of connections complete work |
| 95 | Mounting & Fixing of Fuse sets on double pole structures including making of connections of complete work |
| 96 | Mounting and Fixing of Lighting arrestor set (3 Nos. ) on double pole stucture including making all connections by G.I. strip size 35x6mm to earth point complete work (excluding cost of G.I. Strip) |
| 97 | Painting of poles with angle and channel and all steel part by one coat Rod Oxide Primer and two coats of aluminium paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level. |
| 98 | ST Pole SP-72 |
| 99 | ST Pole SP-55 |
| 100 | ST Pole SP-33 |
| 101 | ST Pole SP-23/21 |
| 102 | Jointing and Fixing of 11 KV cable jointing Kits indor / outdoor cable boxes. |
| 103 | DIsmantling of existing Transformer etc. including disc fitting, Insulator, clamps, Nutt & Bolts and consumer connections including cartage back from site to JE store |
| 104 | 100 KVA |
| 105 | 63 KVA |
| 106 | 25 KVA |
| 107 | Installation / mounting of new Tranformer on double pole structure and fixing of channel / angle etc. and making all connections of Ht and LT side and its cmplete commissioning. |
| 108 | 100 KVA |
| 109 | 63 KVA |
| 110 | 25 KVA |
| 111 | 250 KVA |
| 112 | Route cleareance by cutting of tree branches / proning, loping and chopping of tree for L.T., 11 & 33 KV line. |
| 113 | T-offConnection Complete 11 KV |
| 114 | Providing and fixing of Danger Board and number plate complete by providing clampsof M.S. Flat 35x5 mm and Nuts & Bolts, danger Boards of M.S. Sheet 2 mm Thick 11\"x7\" size (Including cost of all material) |
| 115 | Laying of LT service Cable from pole to consumer end meter alongwith supporting |
| 116 | Digging of tench of size 0.60x0.15 x 0.9 mtr and laying of undergroundcable with making of brick housing and filling of sand including filling of earth with raining & reparing or road including cost of cement sand and stone blast |
| 117 | Digging of tench of size 0.60x0.15 x 1.5 mtr and laying of underground 11 KV XLPE cable with making of brick housing and filling of sand including filling of earth with raining & reparing or road including cost of cement sand and stone blast |
| 118 | Making of section pole for existing LT/HT/33KV line complete in all respect |
| 119 | Installation of 11 KVmetering cubical |
| 120 | Installation of LTPRMC |
| 121 | Fixing of GI pipe complete (size pipe Dia \"4\") |
| 122 | Laying, sagging & binding of AB cable LT line complete. |
| 123 | Loading, unloading & carriage of LT PRMC from store to pit site & installation on the double pole with the help of nut bolt & clamp and making to pass LT cable from T/F to PRMC. |
| 124 | Fixing of special type Holding clamps for J/Eye hook |
| 125 | Laying of 11 KV cable in 1.5 mtr depth with suitable trencheless technology including laying in trench with proving & fixing of HDPE pipe PE 80 N 6 & having dia 160 mm conferming to IS 4984/1995 & having thickness 9.1 to 10.3 mm |
| 126 | Laying of HT cable XLPE 3x50mm, 3x70mm XLPE and 3x150 mm XLPE under ground complete as per respo |
