Public Health Engineering Department-PHED has published Providing And Installation Of Submersible Pumping Machineries And Other Electromechanical Accessories For Source Augmentation Works For Barjora Water Supply Scheme (Left Out Mouzas Of Barjora Block Under Brgf Phase I) ( Zone Iv) At Damodhar River. Submission Date for this Tender is 09-02-2024. Submersible Pump Tenders in bankura West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | PART-A |
| 2 | Supply, delivery of clear water vertical wet type submersible pump suitable for bore well conforming to IS:8034(and as amended threreafter) with standard MOC for potable clear cold water and BEE3star(minimum) rated capable with a continuous rated-2 pole suitable wet type vertical squirel cage induction motor conformoning to IS: 9283(and as amended threafter) suitable for operation in AC Three phase 415V, 50Hz (category Bmotor) as per NIT [2 nos new and 2 nos exising] |
| 3 | a) Discharge-28 M3/Hour, Total head -38 Mtr |
| 4 | Supply, delivery and storage at site 80 mm dia UPVC Column pipe medium gauge both side 8 TPI threaded and one side heavy type socket other site rubber cap for threaded protector Standard (17kg/cm2). |
| 5 | a) 1.5 Mtr. Long |
| 6 | b) 3.05 Mtr. Long |
| 7 | Supply and delivery at site 80 mm dia CI Top Adaptor with flange (Single clamp) |
| 8 | Supply and delivery at site 80 mm dia CI Bottom Adaptor(Single clamp) |
| 9 | Split type MS fabricated suitable tubewell cover as per tubewell housing with a necessary arrangement for clamping devices including holes for air pipe and cable entry gland |
| 10 | Safety device for the above pump set by supplying MS cage with proper clamping arrangement andRound Twisted Machine Made Nylon rope 20 mm dia (super quality)as per requirement including supply of all required materials with nuts and bolts as required |
| 11 | 102mm ? 0-12 Kg / cm2 pressure gauge with brass three way cock and syphone and other necessary fittings |
| 12 | Supply & delivery of M.S. suspension clamp with necessary nuts, bolts & washer etc suitable for 80mm dia pipe (Size-300 mm x 80 mm x 8 mm each) |
| 13 | Supply and delivery of 80mm diafollowing GI specials for delivery line |
| 14 | Tee |
| 15 | Pipe (TATA Medium) (including Socket) |
| 16 | Bend (90") |
| 17 | Flange (G.I Threaded)heavy type |
| 18 | Plug |
| 19 | Socket |
| 20 | Supply and delivery of 32mm diafollowing GI specials for Cable Protection |
| 21 | 100mm long short piece |
| 22 | Bend (90") |
| 23 | Union |
| 24 | Pipe (TATA Medium) (including Socket) |
| 25 | Supply, delivery of clear water Open well Submersible Pump, with Bronze Impeller (Heavy Duty Pump). potable clear cold water and minimum BEE 3 Star Rated motor and suitable for operation in AC Three phases 415V,50Hz (category B motor) Discharge-65m3/Hr, Head-35mtr Suction and Delivery size 80/65mm N.B- H-Q curve has to be submitted during the delivery (1W+1S) |
| 26 | Supply & delivery at site following Valves |
| 27 | Supply & delivery at site & storage CIDF single door swing checkNRV (P.N.–1.0) rating asper IS:5312 Part – I, and as per technical Specifications given in NIT (for individual L/L Pump) |
| 28 | i) DN 80 mm(forL/L delivery header) |
| 29 | ii) DN 80 mm(for H/L individiual delivery header) |
| 30 | CIDFnon-rising Sluice Valvegenerally conforming to IS 14846as per technical Specification given in NIT |
| 31 | i) DN – 80mm (P.N-1.0) (for main line & wash out line) |
| 32 | ii) DN – 100mm (P.N-1.0) (for Common deliveryline) |
| 33 | Supply and delivery ofGear oparatedwafer type slim sealbutterfly valveas per Bs-5155 having valve body of cast IronAs per technical Specification given in NIT |
| 34 | i) DN-80mm dia (PN-1.0) rating (for H/Ldelivery header) |
| 35 | Supply, delivery & storage and installation at site M.S. fabricated dismantling joints with rubber compression ring and adjustable follower flanged complete assembley with galvinised stud and nuts,as per technical Specifications given in NIT |
| 36 | ii) DN:100 (P.N–1.0) (for Commn delivery header ) |
| 37 | iii) DN:80 (P.N–1.0)(for H/L individual delivery line ) |
| 38 | Supply, delivery & storage at site M,S Pipesfor individual pump delivery line from pump discharge upto common delivery header, M.S flanges, bends, specials, etc. as required to make the installation ofdelivery and common delivery header of pumpingmachineries complete in all respects up to the satisfaction of E.I.C.and as per technical Specifications given in NIT |
| 39 | Supply delivery and storage at site of Electromagnetic Flow Meter with remote indicator cum totalizer unit and cable between the meter and indicatoras per technical specification |
| 40 | i) DN: 100 (Full Bore type for Pump Set-II) |
| 41 | Supply, delivery and storage at site of following L.T cables |
| 42 | 50 Sq. mm 3.5 core, 1.1 KV grade, Al. Ar XLPE cable conforming to IS : 7098 (Part – I). From MCCB to PDB cum MCC |
| 43 | 10 Sq. mm 3 core, 1.1 KV grade, Al. Ar XLPEAcable conforming to IS : 7098 (Part – I). a) 2nos starter to new T/W x 150mtr =300 mtr b) 2nos starter to new T/W x 200 mtr =400 mtr |
| 44 | 2.5 sqmm 3core, 1100 Volt grade copper water proof PVC insulated submersible flat submersible cable,Conforming To IS : 694 As Amended Up To Date. a) 2nos Kiox box to submersible Motorx 50mtr =150 mtr |
| 45 | 4 sqmm 3core, 1100 Volt grade copper water proof PVC insulated submersible flat submersible cable,Conforming To IS : 694 As Amended Up To Date. a) 2nos starter to H/L Motorx 50mtr =100 mtr |
| 46 | 4 Sq. mm 2core, 1.1 KV grade, Al. Ar XLPEAcable conforming to IS : 7098 (Part – I). For pole light |
| 47 | N.B-Purchase of all cables should be as per actual site requrement |
| 48 | Supply, Delivery and Storage at Site 2 mm. thick CRCA Sheet Steel Enclosed Cubical type Indoor Floor Mounted415 Volt PDB cum MCC Panelhaving required Feedersas per technical Specifications given in NIT |
| 49 | Supply delivery and storage at site of Ultrasonic type continuous level measuring unit with provision of 4 to 20 mA analogue signal, indicator and recorder for continuous level monitoring as well as 5 nos. relay out put for sensing high, low, low - low level in suction sumpas per technical Specifications given in NIT |
| 50 | Supply and delivery of 450mm(H) x 300(L) x 250mm(B) size out door CRCA sheet steelfabricated cubical type kenopy top cable jointing box inside fitted3 nos 100 Amp rated bus bar andhinged type front door and painted powder coated anticorrosive paint as per IP 55 as per direction of E.I.C |
| 51 | Supply and delivery of 1200 mm sweep, 1 phase, 60/70 watt, 5 star and having 300 mm down rod, 1.1mm thick alluminium bled, conforming IS 374, 2 mm shank thickness ceilling fan |
| 52 | Supply deliveryof outdoor typeLED light fixture Operating Voltage 140V-270 V AC 50Hz ,LED light fixture having LM6 pressure die cast Al. housing pot optical reflector and heat resistant toughened Polycarbonate/ Glass cover complete set. M.No-BRP409 LED130 CW SLC FG PSU GR V2 of Philips make or equivalent model. |
| 53 | Supply delivery80mm diaM.S Black pipe Medium (Class B) as per IS:1239 PART-1 (2004). i) 1.5 mtr long each x 3 nos for each pump house x 2 nos Pump house (For holding Arm at Pump House Roof) |
| 54 | Supply delivey of 1.5 mtr. long M.S Arm bracket made out of40 mm dia MS pipe with painted anticorrosive paint . |
| 55 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). a) 32 mm dia [ for Laying 4Sq mm Cable] |
| 56 | PART-B ( Intallation) |
| 57 | Installation and commissioningof all items mentioned as in PART A (Exepet item no-14.1, 14.2) including supply of all erection items,as required for installation ofpumping machineris &all valves, delivery pipe line, PDB cum MCC panel,laying of cableincludingsupplying all necessary items i.e- nut & bolt wather rubber gasket, with painting, jointing of cables termination cable soketing by suitable rated sockets, jointing the delivery header with H/L & L/L rising main, suporting piller and paining anticorrosive paint etc. including cost ofgas cutting, welding etc. as required for complete the installationas per Hydraulic standard & IE rules in compliance by engaging skilled technician all complete as per Technical specificationand upto entire satisfaction of EIC. |
| 58 | Laying of one No. cablein underground trench 460 mm wide x 760 mm average depth, with brick protection on thetop of the cable with 8 (eight) Nos. bricks per metre, includingfilling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 59 | i) For 10 sqmm Cable |
| 60 | ii) For 50 sqmm Cable |
| 61 | Making internal wiring /electrification of Pump House by 2x 22/0.3(1.5DSq mm + 1x 22/0.3(1.5sqmm) single core PVC insulated multistranded FRLSH grade flexible copper wire through 20mm PVC conduit pipe/cashing by supplying one no 40Amp, 10KA , 240/415V , 50HZ, SPN/DP MCB isolator conforming to IS/IEC:60947-3, C characterise / As per approved vendor list of PHED vide no-PHE/IV/2277/W-181/19 dated-25-09-21 with required model PVC Board & Piano key type switch (Avg Run 6mtr). i) LED Tube Set point-2nos, Bulk Head light point-1no each with necessary earthing arrangement & one fan point(Total point 6nos)including drawing power DB through 20mm PVC cashing caping (precision make) as per direction of EIC(fitting cut-out to SPN/DP MCB wiring should be with continuous earthing arrangement and 20W two no’s x 4ft long LED tube light make-Philips, Bulk Head lightM.No- Endra WT202W LED6S NW PSU S2 PC one nno 0.4 Stap fan regulator fitting etc to be supplyed by agency For new P/H & VLE Room |
| 62 | Earthing of MCC & cable jointingbox with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.incl GI bolts, double nuts, double washers . GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and size86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside)and CI hinged inspection cover of 36.56 cm x 35.56 cm with locking arrangement, and connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised strip By ISI-Medium GI pipe as per NIT Specification |
| 63 | Add: 18% GST |
| 64 | Add: 1% Cess |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
