Public Health Engineering Department-PHED has published Providing And Installation Of Mcc Cum Pdb And Other Electromechanical Accessories For Source Augmentation Works For Barjora Water Supply Scheme (Left Out Mouzas Of Barjora Block Under Brgf Phase-I)(Zone-Ia)At Damodharriver Bank Site Under Bankura Mechanic. Submission Date for this Tender is 09-02-2024. Water Supply Project Tenders in bankura West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | PART-A |
| 2 | Supply & delivery at site following Valves |
| 3 | Supply & delivery at site & storage CIDF single door swing checkNRVrating asper IS:5312 Part – I, and as per technical Specifications given in NIT (for individual H/L Pump) |
| 4 | i) DN 100 mm(P.N.–1.6)(for H/L individiual delivery header) |
| 5 | CIDFrising Sluice Valve generally conforming to IS 14846as per technical Specification given in NIT |
| 6 | i) DN – 300mm (P.N-1.6) (for Common delivery header) |
| 7 | Supply and delivery ofGear oparatedwafer type slim sealbutterfly valveas per Bs-5155 having valve body of cast IronAs per technical Specification given in NIT |
| 8 | i) DN 100 mm(P.N-1.6) (for H/L individual delivery header) |
| 9 | Supply delvery at site and storage of Ductile iron Tamper Proof Single Orifice Air Release Valve of DN 50 as per relevanl lS Standard |
| 10 | i)DN 50 for H/L Commn delivery header) |
| 11 | Supply, delivery & storage and installation at site M.S. fabricated dismantling joints with rubber compression ring and adjustable follower flanged complete assembley with galvinised stud and nuts,as per technical Specifications given in NIT |
| 12 | i) DN:100mm (P.N–1.6) (for H/L delivery line) |
| 13 | Supply, delivery & storage at site M,S Pipesfor individual pump suction & delivery line from pump discharge upto common delivery header, M.S flanges, bends, specials, etc. as required to make the installation ofdelivery and common delivery header of pumpingmachineries complete in all respects up to the satisfaction of E.I.C.and as per technical Specifications given in NIT |
| 14 | Supply delivery and storage at site of insertion type Electromagnetic Flow Meter with remote indicator cum totalizer unit and cable between the meter and indicatoras per technical specification |
| 15 | i) DN: 300mm(Insersen type ) |
| 16 | Supply, delivery & storage ofGleeserine type pressure gauge,cast Al. dial along with DN-15 GI impulse line with valve. |
| 17 | i) (0 – 7 Kg.) 102 mm dia for individiual delivery header |
| 18 | Supply, delivery of95 Sq. mm 3.5 core, 1.1 KV grade, Al. Ar XLPE cable conforming to IS : 7098 (Part – I). From MCCB to PDB cum MCC |
| 19 | Supply, delivery of35 Sq. mm 3 core, 1.1 KV grade, Al. XLPEA cable conforming to IS : 7098 (Part – I). 3 nos motor x 20 mtr =60 mtr |
| 20 | Supply, Delivery and Storage at Site 2 mm. thick CRCA Sheet Steel Enclosed Cubical type Indoor Floor Mounted415 Volt PDB cum MCC Panelhaving required Feedersas per technical Specifications given in NIT |
| 21 | Supply, delivery and storage at site of automatically controlled Plunger type chlorinator dosing pump with Flow Rate 100 Ltr./Hr. and Max pressure of 10kg/cm2) with all accessoriesfor pump motor, foundation Bolt, suction and discharge flange and with storage tank of dosing solution of 100 Ltr. capacity and the prime mover to be coupled with pump of 0.5 HP 3 Phase 1450 RPM squirrel cage TEFC induction Motor, Motor will be IE3 (Make of Machine: As per attached vendor list of P.H.E Dte.) |
| 22 | Supply delivery at site of additional 100 ltr capacity PVC chlorine solution tank |
| 23 | PART-B ( Intallation) |
| 24 | Dismanteling and takenout of MCC Panel Delivery line, Valves etc from base after discannetion of all incomming & out going power cable as per direction of EIC |
| 25 | Installation of all items mentioned as in PART A including supply of all erection items,as required for installation of Sall valves, delivery pipe line, PDB cum MCC panel,Chlorine system, cable tray, laying of cable on cable tray includingsupplying all necessary items i.e- nut & bolt wather rubber gasket, with painting, jointing of cables termination cable soketing by suitable rated sockets, jointing the delivery header with H/Lsuporting piller and paining anticorrosive paint etc. including cost ofgas cutting, welding etc. as required for complete the installationas per Hydraulic standard & IE rules in compliance by engaging skilled technician all complete as per Technical specificationand upto entire satisfaction of EIC. |
| 26 | Installation & commissioning of above chlorinator with supplying & drawing of suitable length 1.1Kv grade 3x36/03(2.5Sqmm) single core standard FRLSh PVC insulated unsheathed copper wire(approved make) from installed panel board through 20mm size PVC rigid conduct FR(Precision make) incl. necessary fittings as required and continuous earthing from nearest earth grid. This includes the cost of making required height brick foundation base with neat cement finishing by supplying all required materials and testing the entire set as per direction of E.I.C(Height of tank foundation shall be higher than that chlorine machine) |
| 27 | Supply, delivery Fixing at siteG.I cable tray for laying of power cable and G.I Perforated cable tray for laying of control cable at Pump House having proper M.S. structural supportas per technical Specifications given in NIT |
| 28 | Earthing & lightning protection for Pump House, electrical installation as per ISS and IE rules andas per technical Specifications given in NIT (2 nos Earth pitfor each intallation) |
| 29 | Add: 18% GST |
| 30 | Add: 1% Cess |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
