Zilla Parishad-ZP has published Tender For Installation Of Solar Powered Water Pump For Irrigation Purpose. Submission Date for this Tender is 24-01-2024. Water Pump Tenders in Coochbehar West Bengal. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete |
2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation |
3 | Single brick flat soling of picked jhama brick including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. |
4 | Cement concrete with 30 mm down graded shingles excluding shuttering. In ground floor.a. 6:3:1 proportion. |
5 | Ordinary cement concrete ( mix 3:1.5:1) M-20 with graded stone chips (20mm down excluding shuttering and reinforcement,if any in groundfloor.b. River bazree. |
6 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction. for works in foundation,basement and upto roof of ground floor / upto 4.0m. i. Tor steel / Mild steel ( TATA/SAIL/RINL) |
7 | Hire and labour charge for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (upto roof of ground floor) 25 mm. to 30 mm. thick wooden shuttering as per decission & direction of E-I-C |
8 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in ground floor. |
9 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor). with 6:1 cement mortar 20 mm. thickplaster |
10 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. |
11 | MS STRUCTURAL WORK with hollow section |
12 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia. |
13 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).(A) PVC Pipes 50mm dia |
14 | 100mm dia |
15 | Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. 50 mm dia. |
16 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. |
17 | Supply of long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut. |
18 | Supplying, fitting and fixing heavy type bell mouth reducing socket 50 mm X 100 mm |
19 | Supplying,fitting and fixing check valve (horizontal) G.M. tested to 21 kg per sq. cm. 50 mm |
20 | Supplying, fitting and fixing plug of approved make conforming to I.S. specifications. 71 mm |
21 | Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality. |
22 | Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. 15 mm |
23 | Supplying fixing commissioning and testing Solar VoltaicModule 315 wp40V on existing iron frame structure each 156 mm Monocrystalline Silicon Solar cells laminated between sheet of Ethyline Vinyl Acilate (EVA) and high transmissivily 3 mm tempered glass. Confirming to IEC 61215(Revised) specification or equivalent National of International Standards. The power output of the module under STC should be minimum of 315w. The operatlng voltage correspondlng to the power output mentioned above should be at least 57.0 Volts . The terminal box IP 65 Protection level on the module should have a provision for opening or replacing the module. |
24 | Supply and fixing round 2-core 4 sq-mm PVC multi core FR wire for aray connecting. |
25 | Supply and fixing MC4 connector for panel loop. |
26 | Earthing with 50 mm (2") dia G.l. pipe 3.64 mm thick x3 mts. Long and 1 x4 SWG G.I.(Hot Dip) Wire (4 mts. Long) 13mm dia. X 80 mm long G.I. pipe protection (1 mtr, long) to be filed with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 ms. Below the ground level & restoring the surface duly rammed. for soft soil |
27 | Connecting the all equipment to earth busbar inciudng GI (Hot Dip) wire of size as below on wall floor….. as required and making connecion to equipment with bolts, nuts, washers cable lugs as required and mending good damages No. 4 SWG. |
28 | Providing and fixing conductor made of 25 mm dia 300 mm long copper tube having single prong at top with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required. |
29 | Testing and commissioning of scheme after completion of all work. ( As per WRDD Schedule ) |
30 | Supply, installation testing &lowering of 2 HP oil Solar submersible pump motor set complete having Suitable discharge as per yield test of well. Submersible cable of 30 mtr 3-core 2.5 sq-mm cable with MOC bar chart and necessary control panel and starter asper manufacturer specification. |
31 | Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.) |
32 | Add GST (CGST+SGST) 18.00% |
33 | Add Labour welfare cess 1.00% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail