|
| 1 | Structured Local Area Networking |
| 2 | OD240403/2022-2023:Supply and Installation of Layer 2 Manageable 24 port Ethernet Switch which having 24 x 10/100/1000 Mbps + 2Gigabit SFPports, web manageable supporting ipv6 having 256 MB RAM, 256 MB flash memory, Switching capacity 50Gbps or better.AC 120/230V. Accepted Make: Cisco/HP/Netgear |
| 3 | OD240404/2022-2023:Supply, Installation, Testing and Commissioning of 24 port Enhanced CAT-6 Fully loaded Modular Type Patch Panel as per EIA/TIA-TSB 40 A specification for interconnecting servers and clients, including termination charges.Accepted make: Molex/AMP/Legrand/Honeywell |
| 4 | OD240405/2022-2023:Supply, Installation , Testing and Commissioningof Indoor Access Point with 2.4 GHz (600Mbps max rate) and 5-GHz (1200 Mbps max rate) radios, with2x2 MIMO support and a total of two integrated, . WiFi 6 Dual-Band AX1800 Speed 1 x 2.5G Ethernet LAN Port , 802.11ax , PoE+ or Optional Power Adapter ,Ceiling/Wall mount Kit. Maximum 250 client device, Wi Fi Standards - 5.0GHz: 802.11a/n/ac/ax & 2.4GHz: 802.11b/g/n/ax , Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference. AP type: Indoor, dual radio, 5-GHz 802.11ax and 2.4-Ghz 802.11ax 2x2 MIMO; ,support WI Fi 6. Supported radio technologies:802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal Frequency Division multiple access (OFDMA) ,Power : Direct DC source and Power over Ethernet (PoE): ) 802.3af/802.3at-compliant source. Suitable stand for keeping the Access point. Three year warrantyetc.Preferred Make : Netgear WAX 610 or equivalent |
| 5 | OD240512/2022-2023:Supply , Installation, Testing and Commissioning of 19 inch, 9U, Network Rack with ACDB 6 port cable manager and PDU, Back open and front Glass door with lock, Cooling Fan etc.Accepted Make:HCL/Netrack/President/Valrack/D Link |
| 6 | OD240407/2022-2023:Supply , Installation, Testing and Commissioning of CAT-6 Information outlet for 1000Mbps having Spring shutter /Dust cover Face plate with SMB and One number of RJ 45 Keystone moduleincluding termination charges. Accepted make: Molex/AMP/Legrand/Honeywell |
| 7 | OD240408/2022-2023:Supply, Installation, Testing and Commissioning of 3mtr standard factory crimped CAT 6 Patch code.Accepted make: Molex/AMP/Legrand/Honeywell |
| 8 | OD240409/2022-2023:Supply, Installation, Testing and Commissioningof 1mtr standard factory crimped CAT 6 Patch code.Accepted make: Molex/AMP/Legrand/Honeywell |
| 9 | 1.53.1:Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable |
| 10 | 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 11 | OD240565/2022-2023:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required. Accessories including External Angle 90°,Flat Angle 90°/TEE, Internal Angle 90°, Internal Coupler, Flat crossed Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc.Preferred make: Precision/MK |
| 12 | OD240566/2022-2023:Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recessincluding cutting the wall and making good the damages in case of recessed installation as required. Accessories including External Angle 90°,Flat Angle 90°/TEE, Internal Angle 90°, Internal Coupler, Flat crossed Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc.Preferred make: Precision/MK |
| 13 | OD240410/2022-2023:Testing and commissioning,Tile cutting and making good the surface as per the requirement, Electrical fittings as per requirement, making permanent labelling on each I/O Ports and on the Patch Panel etc. |
