Military Engineer Services-MES has published Tender For Additional/Alternator To Or Md Accommodation Bldg No 3005 To 3014 At Sector E At Chandimandir. Submission Date for this Tender is 10-02-2024. Mobile Generator Tenders in chandimandir Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-02-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall tilling including cement mortar bedding, complete as specified and directed. |
| 2 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed. |
| 3 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed. |
| 4 | Glazed ceramic coloured tiles of size 350mmx450mmx7mm on vertical surface such as skirting, dados, risers to steps etc set &jointed in neat cementslurry and pointed inwhite or coloured cementto match the colour oftiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 5 | Baroda green marble 14 to 16mm thick, machine cut, laid over and including 10mm thick screed bed in cement mortar (1:4), bedded and jointed with grey cement slurry and pointed with grout of matchingshade including moulding and all necessary cuttingand machine polishing (table rubbed and polished), as in kitchen platform, step, jambs, pillars and like,complete all as specified and directed. |
| 6 | Machine cut kota stone slab on horizontal surface like floors, tread of stairs etc, 18-20mm thick , best quality, width and length as ordered overand including 15mm thick screed bed in cement mortar( 1:4), bedded and jointed with grey cement slurry and pointed with grout of matchingshade including moulding and all necessary cutting and machine polishing,complete all as specified and directed. Note: In case of stair case single piece stone shall be fixed, size as per site. |
| 7 | Making holes into or through concrete slabs/ stone slabs150 mm long for 25mm dia pipe as in cooking plateform, incl making goodthe surface complete all as specified and directed. |
| 8 | Demolition of reinforced cement concrete in roofs, floors, beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed. |
| 9 | Reinforced cement concrete type B-1, 1:2:4(nominal mix, using 12.5mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 10 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bendingspirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm complete all as specified and directed. |
| 11 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 12 | Taking down chowkats or frame n. exc. 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 13 | Taking down chowkats or frame exc. 1.5 sqmand n exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 14 | Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed. |
| 15 | Taking down shutters of any description exceeding 1Sqm but not exceeding 2sqm each including stacking at location as directed by Engineer-in-Charge for refixing in same opening(s) after rescuring or easing, adusting, welding, etc., complete all as specified and directed. |
| 16 | Factory made pressed steel frames having profile 125mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thickMS sheet, including necessary fixing lugs, hinges, lock strike plate,thress hold bar/flat etc. complete ,all as specified and directed. |
| 17 | Factory made pressed steel frames having profile 105mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thickMS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc. complete, all as specified & directed. |
| 18 | 35mm thick flush shutters, solid core costruction, with block board core and plywood face panels, commercial type on both sides as in cupboards, etc. complete all as specified and directed. |
| 19 | 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to received gauge/ glass etc, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc complete all as specified and directed. |
| 20 | Solid PVC frame having profile 75mm x 50mm , single rebate, made out of solid PVC foam with homogenous fine cellular structure having density not less than750Kg/ cum, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metalCSK screws , complete all as specified and directed. |
| 21 | Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 22 | Factory madesolid PVC board 20-22 mm thick as in cup board shelf/ door, sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free, complete all as specified and directed. |
| 23 | Factory madesolid PVC board 18-19 mm thick as in kitchen cabinet/ cupboard panell, shutter with 19mm wide PVC leeping pasted at exposed sides , sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free complet,e all as specified and directed. |
| 24 | 100 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed. |
| 25 | 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed for PVC door, type C-21 complete all as specified and directed. |
| 26 | 100mm hasp and staple,aluminium anodised, wire type, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 27 | 200 mm size aluminium , barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 28 | 150 mm size aluminium, barrel tower bolt of extruded section and fixed for PVC door complete all as specified and directed. |
| 29 | 150 mm aluminium handles cast typecomplete all as specified and directed. |
| 30 | 250 mm longAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed. |
| 31 | 300mm MS ordinary rat tail rod pattern spring incl roller plate complete all as specified and directed. |
| 32 | Continuous (Piano) hinges of size 30mm(width of flap when open) , mild steel , fixed in repairs, complete all as specified and directed. |
| 33 | Factory made steel window box type with side hung shutters including box type hinges and oneshop coat of red oxide primer, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete with glazing bars, dovetailed or welded fixed with and including MS flat of suitable size for fixing grills and guards bars etc as in repairs, complete all as specified. |
| 34 | Factory made steel window box type with side hung shutters including box type hinges and oneshop coat of red oxide primer, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete without glazing bars, dovetailed or welded fixedas in repairs, complete all as specified. |
| 35 | Factory made box typesteel ventilators, openable with side hung shutters with box type hinges including oneshop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded, fixed in repairs, complete all as specified and directed. |
| 36 | Galvanised mild steel wire cloth 0.56 mm nominal dia of wire & avg width of aperture 1.18 mm in fixed with tinned tacks complete all as specified and directed. |
| 37 | Hacking out old broken glass (any thickness, size, quality or description) from wooden, metel frames including punching or drilling out glazing pins/spring clips complete all as specified and directed. |
| 38 | 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading)in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 39 | 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty (or beading)in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 40 | Framed work such as grill guard bars etc welded to steel frame MS round/square bar conforming to Fe 290 Gde-E 165 complete all as specified and directed. |
| 41 | Preparation of new or previously untreatedsteel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide, zinc chrome complete all as specified and directed. |
| 42 | Preparation of new or previously untreatedsteel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint)complete all as specified and directed. |
| 43 | Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed. |
| 44 | Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 45 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 46 | Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 47 | All as per item No 46 hereinbefore but execpt brick |
| 48 | Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete, all as specified and directed. |
| 49 | Dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in CM 1:4 complete all as specified and directed. |
| 50 | Rendering 5mm thick in CM 1:3on fair faces of concrete/brick surfaces as in ceiling, chajja, etc. finished fair and smooth complete all as specified and directed. |
| 51 | Rendering 15mm thick in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 52 | Rendering 15mm thickin Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed. |
| 53 | Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper overand including a coat of primer complete all as specified and directed. |
| 54 | Three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed |
| 55 | Two coats of exterior weather proofacrylicemulsion paint over a coat ofpriming paint including preparation of new wall surfacescomplete all as specified and directed. |
| 56 | Three coat of white wash on ceiling surfaces including preparation of old surfaces complete all as specified and directed. |
| 57 | Preparation of old surfaces of walls and applying two coats of oil bound distemper, complete all as specified and directed |
| 58 | Two coat of white wash on wall surfaces including preparation of old surfaces complete all as specified and directed. |
| 59 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed. |
| 60 | Plain cement concrete 1:5:10 type E-2 using 40mm graded brick coarse aggregate as in sunken floor filling and mass concrete complete all as specified & directed. |
| 61 | Water proofing treatment tosunken portion and adjoining walls of kitchen, WC, Bath & Toilet, etc complete all as specified as under:- (a) 15 mm plaster in cement mortar (1:3) mixed with water proofing compound as per manufacturer’s instructions after roughning and cleaning the surface. (b) Curing the sunken portion with water minimum for 48 hours by ponding. (c)Applying 3mm thick APP membranne with bitumen by torch application to the treated sunken surface over a coat of primer as per manufacturers instructions. (d) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound . |
| 62 | Cast iron nahani traps 100mm dia with gratingincluding jointing to wastepipe with run led jointed and setting/fixedin cement concrete type B-1 1:2:4 fixedas in repair complete all as specified and directed. |
| 63 | Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with CP mixer, waste coupling, angle brackets, PVC connection 15mm size, 450mm long, PVC waste pipe, fixed as in repair complete all as specified and directed. |
| 64 | PTMT 100mm diaboretraps "P" or "S"complete all as specified and directed. |
| 65 | Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests(excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement fixed in repair complete all as specified and directed. |
| 66 | Vitreous china, wash down water closet pan, superior white, Pedestal pattern WC with PTMT ‘P’ or ‘S’ trap, seat cover (excluding, flushing cistern and flush pipe), fixed as in repaircomplete all as specified and directed. |
| 67 | PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, fixed as in repair complete all as specified & directed. |
| 68 | PVC connections 15 mm size with PTMT nuts of length 450 mm, fixed as in repaircomplete all as specified and directed. |
| 69 | Towel rail 600mm long ofPTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed. |
| 70 | Towel ring ofPTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repair complete all as specified and directed. |
| 71 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with CP bracket guard and railing 60cm long, fixed as in repairs, complete all as specified and directed. |
| 72 | Grating doom 100mm dia of PTMT, fixed to floor trap with cement mortar 1:3, fixed as in repairs, complete all as specified and directed. |
| 73 | Looking mirror of size 600mmx450mm of selected quality mounted on PVC frame and back fixed to wall with screw and rawl plugs, fixed as in repairs,complete all as specified and directed. |
| 74 | Plate rack of stainless steel sheet 1.0mm thick of size 600mmx 600mm with steel shelves and hanging arrangements for utensil, fixed as in repairs,complete all as specified and directed. |
| 75 | Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm x 203mm, with bowl ofsize 405mm x 354mm x 203mm incl fixing cantilever brackets, fixed as in repairs, complete all as specified and directed. |
| 76 | Taking up ordown steel tubingand connections 15mm bore, complete all as specified and directed. |
| 77 | Taking up ordown steel tubingand connections 20mm bore ,complete all as specified and directed. |
| 78 | 15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors ,complete all as specified and directed. |
| 79 | Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning ,complete all as specified and directed. |
| 80 | 20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 81 | Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning, complete all as specified and directed. |
| 82 | Cuttingchases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed. |
| 83 | Bib taps brass, fancy type, with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 84 | Bib taps brass, fancy type, long body with wall flange, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 85 | Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down,screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 86 | Stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe,fixed as in repairs complete all as specified and directed. |
| 87 | Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 88 | Wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed |
| 89 | Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repairs,complete all as specified and directed |
| 90 | 25mm dia stainless steelcurtain rod including fixing fancy types brackets, stops, rollers etc., as in repairs complete all as specified and directed. |
| 91 | PVC(SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mmincluding nuts bolts etc, fixed as in repair complete all as specified and directed. |
| 92 | 110 mm bore PVC (SWR) bends of any radius complete, all as specified and directed. |
| 93 | Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) and removal of any existing treatment , complete all as specified & directed. |
| 94 | Plain cement concretetype B-1, 1:2:4 (using 20 mm graded stone aggregate) as in roof padding, roof kerbs of mud stops, rounded or chamfered on edges usingincluding necessary form work, complete all as specified and directed. |
| 95 | 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm andreinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying two coats of bituminous aluminium paint @100gm/sqm on top of membrane,complete all as specified & directed. |
| 96 | 40mm thick brick tiles over and including 20mm thick Cement mortar 1:4 joints, grouted & pointed flush as the work proceedsmixed with crude oil 5% by wt of cement complete all as specified and directed. |
| 97 | All as per item No 96 here-in-before but except tiles. |
| 98 | Supply only water proofing compound, ISI marked complete all as specified and directed. |
| 99 | Dismantling wrought iron or mild steel as in gates, grills, posts etc or in any description not otherwise provided for, complete all as specified and directed |
| 100 | Pre-painted galvalume aluminium zinccoating (AZ 70) GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge. |
| 101 | Rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.290.Gde-E-165,complete all as specified. |
| 102 | Float valve/ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe (minimum weight 210 gms), fixed as in repairs, complete all as specified and directed. |
| 103 | 500 Litres capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) double layeredhoisted and fixed in position including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repairs, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
