Tender For Supply And Delivery Of Cesspool Tanker (Suction Cum Jetting Machine) 6000L - Bs Vi With Chassis In Pathamadai Town Panchayat, Tirunelveli-Tamil Nadu
TDR : 41638400
Tender Notice
BOQ
Expired
Tirunelveli
Tamil Nadu
Tender For Supply And Delivery Of Cesspool Tanker (Suction Cum Jetting Machine) 6000L - Bs Vi With Chassis In Pathamadai Town Panchayat
Name of Work:SBM 2.0 - Supply and Delivery of Cesspool Tanker (Suction cum Jetting Machine) 6000L - BS VI with chassis in Pathamadai Town Panchayat
Sl. No.
Item Description
1
Supply and delivery of Cesspool Tankerwith following SpecificationsFeatures -a) Vacuum PumpType- Rotary Sliding VaneLubrication - Forged oil LubricationCooling - Aircooledb) Suction HoseDia\Length \Qty -4\" / 3 mtr. / 10 Nos with suitable Clamp & Washer and holder in both side of tanker.c) Sludge Suction & Drain Value-Size 4\"Type- Knife gate / Ball valve Heavy duty (For Suction and Delivery Separately.)d) Hyd.PumpType & Drive- Not Applicable
2
Capacity a) TankVolume - Water Storage Tank -1000 Litre Sludge Storage Tank -5000 LitreBuilt by 6 mm thick MS plate manually open type Rear Door and another side fixed dish end type. In Sludge Tank side inner slide plate must provided at an angle of 7 degree, and also provide Reinforecement to avoid buckleness in Vaccum and Pressure operation.b) Vacuum PumpMake - Imported Brand only - Jurop / Mono / Gardrner DenverMistrel / Battioni only.Flow / Vacuum - 500-550 Cum ./Hr./90%Mode of operation - Suction and Pressure c) Jetting PumpMake - Prattisoli or equivalent imported make only.Working Pressure - 150-160 barHose Length - 120 m - Imported brand onlySize - 3/4\" dia.Water Flow for Pump of Jetting Machine - 80-100 LpmMinimum Brust pressureof Jetting Hose - 250-300 BarMaximum Working Pressure of Jetting Hose - 100-120 Bar
Mounting- Chassis a) GVW - 12 TONb) Emission Norms - As per Local RTOc) Chassis Engine output - Min.90 HP d) Driver’s Cabin Type - Single (Day) Cabin e) Make -Ashok Layland/ Tata/ Eicher/ Equivalent with PTO with emission norms BSVI f) Make/Model/wb/hp/Side PTO Provision- Any other equivalent model of other chassis manufacturers g) Scope - Customer h) Side PTO Provision- Provision required
5
Dimensions - Equipment a) Equipment Length- 4500-5150 mm Approxb) Equipment height- 1500-2200 mm Approxc) Overall width- 2000-2250 mm Approxd) Overall Length - 3000-3500 mm Approxe) Equipment rear overhang -600-1600 mm Approx
6
Painting - Surface Preparation and finish a) Eqiuipments Exterior - Spray-painted with two coats of superior qulity anti-corrosive primer and two costs of enamel metal paint Colour code will be as per customer / tender requirements b) Tank\"s interior- coated with 2 coats of superior quality anti-corrosive gray epoxy paint For the first one year the operation and maintenance cost per Cesspool Tanker shall be the responsibility of the supplier
7
For the first one year the maintenance cost per Cesspool Tankerand also Commissioning of vehicle and Training of Concern TP\"s operator for a period of minimum one week shall be the responsibility of the supplier.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
